The lights keep flickering. You've checked the bulbs and the plug. Nothing. Turns out it's the ground. You splice in this 4-pole loop, bolt down the dedicated ground wire, and the lights come on like they should. Problem solved.
Whatever you're towing, you'll be protected against theft with this hitch and coupler lock. The boomerang hitch pin locks your ball mount to either a 1-1/4" or 2" hitch receiver, and there's a lock for your coupler as well.
Need to put a 2" bike rack or cargo carrier in your 1-1/4" hitch receiver? No worries. Simply insert this adapter and off you go. It cannot get any easier to use and is certainly less expensive than buying another hitch.
You're wiring up the trailer and want it done right the first time. This 4-way flat connector gives you what you need: solid connections for stop, turn, and taillights. No guesswork. Just splice, test, and tow.
The trailer has been sitting all winter. On the first warm weekend, you go to hook up and the plug falls apart in your hand. You've got one shot to fix it before hitting the road. Splice in this 4-way, test the lights, and you're good to go.
Light-duty ratchet straps with rubber-plated-steel S-hooks let you secure your mower, tiller, or other light load in your pickup truck or on your trailer. Padded handles with thumb releases let you easily tighten the straps. 1,500 lbs Max load.
This hitch lock can fit in both 1/2" and 5/8" receiver holes and has a dust cap to block out dirt and moisture. Its stainless steel construction makes it extra rustproof. Includes 2 keys.
You're rewiring a trailer from scratch or cleaning up a mess of splices. This 7-way gives you a fresh cable, sealed jacket, and built-in test lights. You wire it once, plug it in, and know its good. All that's left is to head out.
This ball mount is designed in a unique X-shape so water can drain out of your receiver while it's installed, preventing seize up. Comes with a pin and clip.
You get 3 ball mounts in one with this super convenient accessory. Instead of swapping out ball mounts for each trailer, you can just rotate it. The included ball sizes are 1-7/8", 2", and 2-5/16", with a GTW of up to 10,000 lbs.
Heavy-duty ratchet strap with steel double J-hooks lets you haul a large tractor, truck or other heavy load on your trailer or flatbed truck. Padded steel handle with trigger release lets you quickly tighten and loosen the strap. 10,000 lbs Max load.
You're rewiring an old trailer and want to do it right. This 25-foot Y-harness lays in smooth, splitting left and right so you don't need jumper wires. Dual ground lines keep the lights steady. Splice it in, test it, and you are ready to go.
Get 3 ball mounts in 1 with this super-convenient accessory. Just rotate the shank to get the ball size you need. You can also hook up chains, cables, or rope to the hook.
Keep your tarp secure over your truck bed or trailer with this pack of tie-downs. EPDM Rubber straps are good in any season, and the steel S-hooks will keep your tarp held down without warping.
You've chased shorts through cracked wire long enough. Time to rip it out and start fresh. This 7-blade connector comes pre-wired with 72" of jacketed cable. Strip, splice, and it's ready to plug in for solid power front to back.
This is the ultimate ball mount for your journey. It is easy to adjust both the ball and the rise/drop. It offers 5-5/8" drop and 6-1/2" rise. It is made of super durable, lightweight aluminum. Includes locking pins.
You're replacing the wiring on a trailer with surge brakes and want everything to work right the first time. This 5-wire flat set gives you the reverse lockout and all the lighting functions. Splice it in, match the wires, and you are good to go.
This ball mount is designed in a unique X-shape so water can drain out of your receiver while it's installed, preventing seize up. It comes with a locking pin to stop thieves.
Your trailer plug is cracked and corroded from years of road grime, and you don't want to mess with flickering lights or weak connections. You wire in this 7-way RV-style plug and know it's solid. Lights fire up, and you're ready to tow.
Protect your anchor points from scratches and scuffs with strong, steel-core, coated bungees. These range from 10" to 48" long to tie down lighter things like gas cans, luggage, or coolers. Also includes 4 standard mini 10" bungees.
The trailer lights are flickering again. You've replaced bulbs, checked grounds, and still no luck. Time to swap the plug. This 4-way flat connector comes with a built-in tester and 24 inches of bonded wire. Splice it in, test the lights, and go.