New Arrivals

Your brake actuator sits further back than expected, and a short hose wont reach. This 78" line gives you more length and a 90-degree fitting that clears the frame without pulling at the connection.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Disc Brakes
• Hydraulic Drum Brakes
• 6-1/2 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

Replace a damaged or stripped stud on your 8K or 12K DeeMaxx hub with this heavy-duty 5/8"-18 press-fit stud. Measures 3.06" long overall. Works with hub and hub-rotor assemblies. Built for high-load trailers. Sold individually.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Hubs and Drums
• Trailer Tires and Wheels
• Wheel Studs
• 5/8 Inch Diameter
• Drive-In Stud
• DeeMaxx

Need a tough, reliable connection from your actuator to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Hydraulic Drum Brakes
• Disc Brakes
• 20 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

Replaces the stainless steel nut for your 8K DeeMaxx disc brake bracket. 1/2"-20

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Hardware
• Nuts
• DeeMaxx

Need a solid replacement lug nut? This chrome acorn lug nut keeps your wheels snug and secure. The closed-end bulge design ensures a tight fit, while the chrome finish stands up to rust and road grime for the long haul.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Golf Cart Tires and Wheels
• Wheel Lug Nut
• 5/8 Inch Wheel Bolt
• Acorn Nut
• 60-Degree Cone
• Chrome-Plated Steel
• DeeMaxx

Grade 8 wheel stud fits DeeMaxx 13" hub-and-rotor assemblies, but its standard 9/16"-18 thread size will fit other hub assemblies just as well.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Hubs and Drums
• Trailer Tires and Wheels
• Wheel Studs
• 9/16 Inch Diameter
• Drive-In Stud
• DeeMaxx

Need a tough, reliable connection from your caliper to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Disc Brakes
• Hydraulic Drum Brakes
• 4 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

Replaces the caliper-mounting bracket for you a 10-16K Dexter/Lippert dual wheel axle, fits 11" rotor with 7 bolt flange.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 16000 lbs
• Caliper Parts
• Hardware
• Mounting Brackets
• DeeMaxx

Need a tough, reliable connection from your actuator to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Trailer Brakes
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• 6 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

This 23' hose gives you the length to run a brake line from your actuator to the axle on longer trailers. The extra reach lets you make a full connection without adding couplers or mid-line fittings.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Hydraulic Drum Brakes
• Disc Brakes
• 23-1/3 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

This stainless steel acorn lug nut laughs in the face of rust. Perfect for saltwater use, it stays strong and rust-free. No chipping, no peeling, just a tough, reliable fit that shrugs off moisture, salt, and road grime for the long haul.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Golf Cart Tires and Wheels
• Wheel Lug Nut
• 5/8 Inch Wheel Bolt
• Acorn Nut
• 60-Degree Cone
• Stainless Steel
• DeeMaxx

For heavy-duty applications that require cable, this steel winch cable has a break strength of 4,200 lbs and a working load limit of 1,400 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 3/16 Inch Diameter
• 4200 lbs
• Wire Rope
• CURT

Replaces the spring bar for your Curt TruTrack 4P trailer-mounted weight distribution system (17520).

• Accessories and Parts
• Weight Distribution Hitch
• Spring Bars
• Square Bar
• CURT

Replaces the mounting hardware for your Curt 70129 tow bar base plate. Restores secure fit on Jeep Gladiator JT.

• Accessories and Parts
• Tow Bar Base Plate
• Hardware
• CURT

Restore connectivity between your switch panel and RV generator with this 10-foot Cummins Onan adapter harness. Designed for use with remote start/stop control panels on HGJBB, KY, and HGJAx model generators.

• Accessories and Parts
• Generators
• Wiring Harness
• Cummins Onan

You're replacing your RV's thermostat and want something easy and reliable. This single-zone analog unit gives you simple heating and cooling control without digital menus.

• Accessories and Parts
• RV Air Conditioners
• Thermostat
• Black
• Coleman-Mach

You're swapping out your RV's AC and need a distribution box to match. Open the louvers for cool air directed straight into the cabin, or close them to push air through existing ducts. Includes a filter that pops out for a quick rinse.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Coleman-Mach

You're replacing your RV's AC and need a non-ducted ceiling assembly with built-in controls. This unit adds front and rear airflow dampers, pop-out filters, and heat strip prep. Designed for Coleman-Mach systems. Other parts required.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Coleman-Mach

Reduce your Coleman-Mach RV air conditioner's start-up power demand by up to 75% and ease the strain on your AC compressor. Start and run your AC smoothly without tripping breakers or overloading your generator.

• Accessories and Parts
• RV AC Soft Start
• RV
• Plug-In
• Single AC
• Coleman-Mach

You're replacing your RV's AC and need a ceiling assembly that puts you in control. This non-ducted air distribution box has built-in knobs, adjustable louvers, and a pop-out filter. Designed for Coleman-Mach systems. Other parts required.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Coleman-Mach

You're replacing your RV's thermostat and need a digital controller that works with your Coleman-Mach single-zone system. This is the thermostat only, but you can pair it with a compatible rooftop AC and ceiling assembly to finish your setup.

• Accessories and Parts
• RV Air Conditioners
• Thermostat
• Black
• Coleman-Mach

Replace the worn or non-working switch panel on your Cummins Onan generator. This panel lets you start and stop your gas or LP generator from a central location and works with select HGJBB, KY, and HGJAx models.

• Accessories and Parts
• Generators
• Switch Panel
• Cummins Onan

This electric heater kit fits your medium or low-profile Coleman Mach RV air conditioner.

• Accessories and Parts
• RV Air Conditioners
• Heat Strip
• Coleman-Mach

Replace a lost or damaged bracket or install one in a second vehicle to easily transfer your Curt NEXT brake controller. The low-profile design installs above or below the dash and includes multiple mounting options for a secure, unobtrusive fit.

• Accessories and Parts
• Trailer Brake Controller
• Mounting Hardware
• Brackets
• CURT