New Arrivals

Restore your Curt TruTrack 2P hitch with this direct replacement head. Built to fit 5,000-lb to 8,000-lb systems only (17599), it keeps your setup towing straight with integrated sway control right where you need it.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• CURT

For heavy-duty applications, this strap has a break strength of 4,800 lbs and a working load limit of 1,600 lbs.

• Accessories and Parts
• Trailer Winch
• Cables and Straps
• 22-3/8 Inch Wide
• 1600 lbs
• Straps
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your driver's seat.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

Replace the lost or damaged center pin for your Curt PowerRide fifth-wheel trailer hitch. Pin secures the 5th wheel head to the hitch body.

• Accessories and Parts
• 5th Wheel Hitch
• Pins and Clips
• CURT

Replaces the short bed bracket for your Curt OEM puck system gooseneck ball kit (C60668 or C60663). Compatible with 2023-2025 GMC Sierra and Chevrolet Silverado trucks with 6.5' short beds.

• Accessories and Parts
• Trailer Hitch Ball
• Mounting Hardware
• Brackets
• CURT

Replaces the wheel hook on your Benton bike rack (B54VR, B82FR, B54FR, and B34FR). This is the wheel hook that attaches to the top of the adjustable arm, to secure your bike's front tire.

• Accessories and Parts
• Hitch Bike Racks
• Cradle and Arm Parts
• Upright Hooks
• Shifts&Grins
• LittleShift
• Benton

Replaces the anti-rattle hitch pin for your Benton rack (B54VR, B82FR, B54FR, B34FR, and B94FR).

• Accessories and Parts
• Hitch Bike Racks
• Pins and Clips
• Pins
• LittleShift
• Shifts&Grins
• ShiftShow
• Benton

Replaces the hardware for your Benton LittleShift bike rack (B54FR).

• Accessories and Parts
• Hitch Bike Racks
• Hardware
• LittleShift
• Benton

Confidently install your Old Man Emu leaf springs with this custom-fit bushing kit. Includes 1 metal sleeve and 6 bushings made of durable polyurethane and rubber to reduce squeaks and last longer. Each spring requires one kit, so order accordingly.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Front-end sag from added weight affects ride height and steering. A 10 mm coil spring packer restores balance by compensating for accessories like bumpers or winches. Easy to install, it provides a subtle lift for better handling and a level stance.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Spring Supports
• Old Man Emu

Protect your investment and add options to your light bar with these clip-on polycarbonate covers. Used on Slimline bars with spot or flood lights, the amber color adds contrast in fog or wet conditions, while limiting impact damage. Sold as a pair.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Light Covers
• 9 Inch Long
• Amber
• ARB

Confidently install your Old Man Emu leaf springs with this custom-fit replacement U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• U-Bolts
• Old Man Emu

When you lift the front of your rig, the sway bar can end up out of position. This front sway bar link brings it back into proper alignment - helping you maintain stability and predictable handling on- and off-road.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• End Link
• Front Anti-Sway Bar
• Old Man Emu

Reduce friction and prevent squeaking with SRBC60A interleaf liners for Old Man Emu leaf springs. These HDPE liners snap into place and feature a long retention clip, ideal for bottom leaves, or long leaves with contact on one side only.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Liners
• Old Man Emu

Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• Bushings
• Old Man Emu

Lifting your suspension can create new clearance issues - like the front driveshaft getting too close to the sway bar or the rear sway bar limiting travel. This spacer kit solves both, giving your suspension room to work as it should.

• Accessories and Parts
• Anti-Sway Bars
• Spacers
• Rear Anti-Sway Bar
• Front Anti-Sway Bar
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• U-Bolts
• Old Man Emu

Added gear can cause rear suspension sag, throwing off ride height and handling. A 10 mm coil spring packer levels your stance by compensating for uneven weight. Easy to install, it provides a subtle but effective lift for better balance and control.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Spring Supports
• Old Man Emu

Lifting your rig can throw off sway bar angles and compromise handling. These front and rear sway bar links restore proper geometry, keeping your suspension stable and your sway bar doing its job on and off the road.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• End Link
• Rear Anti-Sway Bar
• Front Anti-Sway Bar
• Old Man Emu

Use this helper spring spacer kit when adding a helper spring to your Old Man Emu leaf spring pack. Includes a 60 mm x 3 mm spacer and HDPE liners to reduce friction, prevent hotspots, and ensure proper spacing for smooth and durable performance.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Spacers
• Helper Spring Spacer
• Old Man Emu

Y-Type splitter cable with ARB's 5-pin connectors allows up to 4 Solis lights to be controlled from one switch pad or the LINX system. If you want lights installed with (1) 5-setting switch pad, you need this splitter for safe, optimal operation.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Wiring
• Splitter
• ARB

After a lift, your steering can feel twitchy or off-center, like your rig just won't hold a straight line. This caster kit adds 2 degrees of positive caster through a set of press-in bushings, helping your front end feel planted again.

• Accessories and Parts
• Vehicle Suspension
• Casters
• Old Man Emu

Upgrading your bumper doesn't mean you have to sacrifice fog light performance. This LED kit fits vehicles with factory fog light and drops cleanly into select ARB bumpers delivering better visibility and a trail-tough build.

• Accessories and Parts
• Bumper
• Light Kit
• ARB

When you lift your rig, tight clearance between the rear sway bar link and shock can lead to contact, or worse, damage. This spacer kit adds the room you need to keep both components moving freely and keep your adventure worry-free.

• Accessories and Parts
• Anti-Sway Bars
• Spacers
• Rear Anti-Sway Bar
• Old Man Emu