New Arrivals

Give your boat a gentle landing every time you load up. This 3" polyurethane bow roller cushions the front of your boat, absorbs bumps on the road, and helps keep your bow protected, trip after trip.

• Boat Trailer Parts
• Rollers
• Bow Roller
• 3 Inch Diameter
• 3 Inch Long
• Fits 1/2 Inch Shaft
• CE Smith

Give your trailer a classic look and reliable protection. This rounded teardrop fender shields both tires on one side, keeping rocks, water, and road grime away from your cargo.

• Trailer Fenders
• No Step
• 15 Inch Wheels
• 14 Inch Wheels
• 9 Inch Wide
• 66 Inch Long
• Steel
• For Tandem-Axle Trailers
• Gray
• CE Smith

Replacement CE Smith spindle welds onto your trailer axle.

• Trailer Spindles
• Standard Spindle
• 1-1/16 Inch Diameter
• CE Smith

Create a sturdy tie-down spot wherever you need it on your boat trailer. This aluminum bracket bolts to your trailer's frame, wall, or floor so you can secure your coolers or gear to prevent shifting during travel.

• Boat Trailer Parts
• Tie-Down Anchors
• Tie-Down Anchor Brackets
• 3/8 Inch Tall
• 3 Inch Wide
• 5-1/4 Inch Long
• CE Smith

If you've ever winched a deep-hull boat onto your trailer and worried about scraping or shifting, this V-shaped keel roller is here to help. It cushions your hull, absorbs bumps, and keeps loading and unloading smooth.

• Boat Trailer Parts
• Rollers
• Keel Roller
• 5-1/4 Inch Diameter
• 6-1/2 Inch Long
• Fits 1/2 Inch Shaft
• CE Smith

Your trailer's been through it all: salt spray, washboard roads, shifting hardware. These frame straps step in as quiet fixers, backing your U-bolts and keeping your setup steady from driveway to dock and every stop in between.

• Boat Trailer Parts
• Frame Straps
• 1-1/4 Inch Wide
• 3-3/4 Inch Long
• CE Smith

Keep your trailer steady on the road. This heavy-duty front hanger attaches to your trailer's frame and holds a 1-7/8" wide slipper spring in place, so your suspension can absorb bumps and keep your cargo riding smooth.

• Trailer Suspension Parts
• Hangers
• Camper
• Car Hauler
• Utility Trailer
• Slipper Springs - 1-7/8 Inch
• 3-7/8 Inch Tall
• CE Smith

If youre hauling your boat to the ramp or loading sleds for a snow day, your trailer needs reliable hardware. This galvanized U-bolt plate keeps your axle and springs secure through wet launches and winter roads.

• Trailer Suspension Parts
• U-Bolt Plates
• Boat Trailer
• Snowmobile Trailer
• Round Axle - 2 Inch
• CE Smith

Loading your fishing or jon boat at a busy ramp can be tricky, but this side guide roller helps every time. Mounted along your trailer, it gently centers your boat for smooth loading, so you can skip the struggle and get off the water faster.

• Boat Trailer Parts
• Rollers
• Side Guide Roller
• 2-1/2 Inch Diameter
• 12 Inch Long
• Fits 1/2 Inch Shaft
• CE Smith

When you need sturdy sidewalls for your flatbed truck or utility trailer, this weld-on stake pocket makes it simple. Just drop in a 2x4 board and know your cargo is staying put. It's raw metal, so give it a painted finish to prevent rusting.

• Tie Down Anchors
• Trailer Tie-Down Anchors
• Truck Tie-Down Anchors
• Stake Pockets
• 2 x 4 Stake Pocket
• Surface Mount - Weld-On
• CE Smith

Whether you're hauling gear through rain or backing down a boat ramp, this galvanized fender keeps rocks, water, and grime off your cargo and your trailer looking sharp for years to come.

• Trailer Fenders
• No Step
• 15 Inch Wheels
• 9 Inch Wide
• 32 Inch Long
• Galvanized Steel
• For Single-Axle Trailers
• Gray
• CE Smith

If you want to protect your boat, load, and nearby drivers from rocks and rain spray, these 72" tandem-axle fenders help keep road debris from flying and hitting others or landing on your cargo. Weld them on or bolt with brackets.

• Trailer Fenders
• No Step
• 15 Inch Wheels
• 16 Inch Wheels
• 10 Inch Wide
• 72 Inch Long
• Steel
• For Tandem-Axle Trailers
• Gray
• CE Smith

Every time you head to the ramp or hit the road, you count on your trailer to keep your boat or gear riding safe. This galvanized bracket connects your slipper spring to the frame, resists rust from rain, spray, and muddy drives.

• Trailer Suspension Parts
• Hangers
• Camper
• Boat Trailer
• Snowmobile Trailer
• Car Hauler
• Utility Trailer
• Slipper Springs - 1-3/4 Inch
• 2-1/4 Inch Tall
• CE Smith

Your trailer's been through it all: salt spray, washboard roads, shifting hardware. These frame straps step in as quiet fixers, backing your U-bolts and keeping your setup steady from driveway to dock and every stop in between.

• Boat Trailer Parts
• Frame Straps
• 1 Inch Wide
• 4 Inch Long
• CE Smith

When you pull your trailer down a gravel road or pull out after a full day at the lake, this rear hanger will support every mile. It holds your 2" slipper spring, so bumps and potholes dont get the best of your cargo.

• Trailer Suspension Parts
• Hangers
• Camper
• Car Hauler
• Utility Trailer
• Slipper Springs - 2 Inch
• 1-1/4 Inch Tall
• CE Smith

Swap worn springs with this CE Smith 24-5/8" slipper leaf spring. Built to handle 250-lb loads, it's perfect for light-duty trailers. Features 1-leaf steel construction, 1-3/4" width, and eye-radius end for 1/2" shackle bolt fit.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Slipper Springs
• 1/2 Inch Eye
• Bushing Not Included
• 500 lbs
• 1-3/4 Inch Wide
• 24-5/8 Inch Long
• Standard Grade
• CE Smith

Give your trailer a rugged touch that's more than just good looks. This Jeep-style fender keeps rocks, water, and debris from flying up on the road, so your cargo and everyone behind you stay protected.

• Trailer Fenders
• No Step
• 10 Inch Wheels
• 8 Inch Wheels
• 12 Inch Wheels
• 8-1/2 Inch Wide
• 23-3/4 Inch Long
• Steel
• For Single-Axle Trailers
• Gray
• CE Smith

Give your trailer a classic look and reliable protection. This rounded teardrop fender shields both tires on one side, keeping rocks, water, and road grime away from your cargo.

• Trailer Fenders
• No Step
• 16 Inch Wheels
• 15 Inch Wheels
• 10 Inch Wide
• 72 Inch Long
• Steel
• For Tandem-Axle Trailers
• Gray
• CE Smith

Stop worrying about rusted trailer parts after trips to the boat ramp or long days in the rain. This galvanized spring seat welds to your 2" square axle and fits 1-3/4" or 2" springs, fighting off rust for seasons to come.

• Trailer Suspension Parts
• Spring Seats
• Utility Trailer
• Camper
• Car Hauler
• 3500 lbs
• Square Axle - 2 Inch
• CE Smith

7-3/4" Long curved equalizer connects double-eye springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Galvanized, so it's perfect for your boat trailer!

• Trailer Suspension Parts
• Standard Equalizer
• Car Hauler
• Camper
• Snowmobile Trailer
• Boat Trailer
• Utility Trailer
• Double Eye Springs
• 7-3/4 Inch Long
• Triple Axle
• Tandem Axle
• CE Smith

Your trailer's been through it all: salt spray, washboard roads, shifting hardware. These frame straps step in as quiet fixers, backing your U-bolts and keeping your setup steady from driveway to dock and every stop in between.

• Boat Trailer Parts
• Frame Straps
• 1 Inch Wide
• 5 Inch Long
• CE Smith

Keep your trailer steady on the road. This front hanger attaches to your trailer's frame and holds a 1-3/8" wide slipper spring in place, so your suspension can absorb bumps and keep your cargo riding smooth.

• Trailer Suspension Parts
• Hangers
• Camper
• Snowmobile Trailer
• Boat Trailer
• Car Hauler
• Utility Trailer
• Slipper Springs - 1-3/4 Inch
• 2-3/8 Inch Tall
• CE Smith

Give your boat a smooth, steady slide on and off your trailer. This 12" polyurethane keel roller cushions and guides your hull, fits a 5/8" shaft, and helps prevent scuffs and scrapes at the ramp.

• Boat Trailer Parts
• Rollers
• Keel Roller
• 12 Inch Long
• Fits 5/8 Inch Shaft
• CE Smith

Tired of mud and rocks splattering your gear or hitting the car behind you? This single-axle fender keeps the mess off your trailer and cargo and gives your trailer a nice finished look.

• Trailer Fenders
• No Step
• 14 Inch Wheels
• 9 Inch Wide
• 28 Inch Long
• Steel
• For Single-Axle Trailers
• Gray
• CE Smith