You're rebuilding the trailer suspension and need a clean start. You weld the hangers, bolt up the shackles, and the new springs drop right in. Everything's square and the axle tracks true.
Your old drum is grooved and the brakes are grabbing weird. You pull that old one off, line up the new one, and everything fits. Bearings are packed and the lugs torque down smooth. Now your trailer brakes like it should.
Pipe plug lets you stop the flow through your freshwater lines. Commonly used when doing repair or remodeling work and you want to cap off a line that will need to be pressurized before you finish.
Put this adapter on the end of a 1-1/4" hose to create an NPT connection for RV fresh-water lines. Used to connect a hose to your water tank to fill or drain.
Drain your RV's black water tank with the flip of a switch and stop struggling with gunked up manual pulls. Contains everything you need, including a replacement blade valve, switch, wiring, and hardware.
Vent cover keeps rain and debris out of your plumbing system while allowing air in so drains function normally and gasses can escape. White PVC construction.
Use this adapter fitting to transition your 1/2" PEX pipe to a fresh-water line with a 1/2" NPT connection. Installs on PEX pipe without any tools. Swiveling female NPT connector attaches to a male NPT fitting.
Replace the waste valve on your RV's gray-water tank with this cable-actuated gate valve. 190" Cable lets you open or close it from hard-to-reach spots. Non-stick seals resist cracking. Fits 1-1/2" pipe.
Bare hose can be used with a variety of fittings for RV fresh-water lines. Run hose from fill dish to your freshwater tank or from your tank to elsewhere in your RV.
PVC wye is used for connecting drain pipes to the drain-waste-vent stack. Joins 3" PVC pipe, commonly used in mobile homes or other residential plumbing.
1/2" NPT threaded cap is a good replacement for caps on drains on water heaters that you may have lost or misplaced. It's also used to run pressure tests in newly installed freshwater lines.
Replace the waste valve from your RV's black-water tank with a cable-actuated gate valve. 150" Cable lets you open and close the valve even if it's in a hard-to-reach place. Non-stick seals resist cracking. Installs on 1-1/2" pipe.
Need a complete latch setup, pipe included? This cam-action kit gives you a solid hold on your enclosed trailer door, smooth operation when it's time to open up, and the included hardware to get it installed right.
Upgrade your trailer with this heavy-duty ramp spring. It provides smooth operation, reduces strain, and prevents freefalls. Designed for enclosed trailer doors 43"- 79" wide, this durable system ensures safe, reliable performance.
You're loading up the mower, the quad, or the jobsite gear and the ramp won't budge. That old hinge is rusted solid. This aluminum replacement welds on and stays greased so your ramp drops down smooth every time you need it.
Upgrade your trailer with this heavy-duty ramp spring. It provides smooth operation, reduces strain, and prevents freefalls. Designed for enclosed trailer doors 40"- 82" wide, this durable system ensures safe, reliable performance.
Need a complete latch setup, pipe included? This cam-action kit gives you a solid hold on your enclosed trailer door, smooth operation when it's time to open up, and the included hardware to get it installed right.
Replace your old trailer door spring with this heavy-duty system. This dual-spring setup lets you easily open and close the ramp door on your enclosed trailer and eliminates the risk of it freefalling. Fits 60 to 82 wide trailer doors.