New Arrivals

Rustproof, durable aluminum bracket lets you mount a tail light to your trailer frame.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• CE Smith

Rustproof, durable aluminum bracket lets you mount a tail light to your trailer frame.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• CE Smith

This rust-resistant bracket lets you mount a bunk board vertically on your boat trailer. It's adjustable, so if you need to move your bunk up or down, just loosen the bolts a little and adjust as needed.

• Accessories and Parts
• Boat Trailer Parts
• Brackets
• Bunk Bracket
• CE Smith

Rustproof, durable aluminum bracket lets you mount a tail light to your trailer frame.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• CE Smith

Replace 1 worn or damaged backing plate on your single-axle trailer fender. Backing easily blocks water and road debris from hitting the side of your trailer.

• Accessories and Parts
• Trailer Fenders
• Fender Back
• CE Smith

• Accessories and Parts
• Tents
• Tent Repair
• Coghlans

Tired of cranking, bouncing, or backing in too deep at the ramp? Slydz-On helps your boat slide off and onto your trailer bunks smoother, without the mess of grease or installing rollers. Just spray it on, let it dry, and let it work.

• Accessories and Parts
• Boat Trailer Parts
• Lubricant
• Sprays
• Caliber

Need a tough, reliable connection from your actuator to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Hydraulic Drum Brakes
• Disc Brakes
• 20 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

The Maxx coat on this disc brake is three times more durable than Dacromet - perfect for coastal or snowy areas. Assembly comes with pre-installed inner (25580) and outer (02475) bearings, inner (25520) and outer (02420) races, and seal (GS-2250DL).

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• LH
• RH
• 7000 lbs
• Brake Assembly
• Hub and Rotor Assembly
• DeeMaxx

Replaces the stainless steel bolt for your 8K DeeMaxx disc brake bracket. 1/2"-20

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Hardware
• Nuts
• DeeMaxx

Need a solid replacement lug nut? This chrome acorn lug nut keeps your wheels snug and secure. The closed-end bulge design ensures a tight fit, while the chrome finish stands up to rust and road grime for the long haul.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Golf Cart Tires and Wheels
• Wheel Lug Nut
• 5/8 Inch Wheel Bolt
• Acorn Nut
• 60-Degree Cone
• Chrome-Plated Steel
• DeeMaxx

Grade 8 wheel stud fits DeeMaxx 13" hub-and-rotor assemblies, but its standard 9/16"-18 thread size will fit other hub assemblies just as well.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Hubs and Drums
• Trailer Tires and Wheels
• Wheel Studs
• 9/16 Inch Diameter
• Drive-In Stud
• DeeMaxx

Need a tough, reliable connection from your caliper to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Disc Brakes
• Hydraulic Drum Brakes
• 4 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

Replaces the caliper-mounting bracket for you a 10-16K Dexter/Lippert dual wheel axle, fits 11" rotor with 7 bolt flange.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 16000 lbs
• Caliper Parts
• Hardware
• Mounting Brackets
• DeeMaxx

Need a tough, reliable connection from your actuator to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Trailer Brakes
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• 6 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

280" Line is most often used to connect your actuator to the rest of your hydraulic system. Brass fittings won't rust and are easier to work with than stainless steel.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Hydraulic Drum Brakes
• Disc Brakes
• 23-1/3 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

This stainless steel acorn lug nut laughs in the face of rust. Perfect for saltwater use, it stays strong and rust-free. No chipping, no peeling, just a tough, reliable fit that shrugs off moisture, salt, and road grime for the long haul.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Golf Cart Tires and Wheels
• Wheel Lug Nut
• 5/8 Inch Wheel Bolt
• Acorn Nut
• 60-Degree Cone
• Stainless Steel
• DeeMaxx

Replaces the 7.0 hp motor for your 12V ComeUp winch. Fits with DV-18, STS-15010, and STS-15012 winches.

• Accessories and Parts
• Electric Winch
• Motor
• ComeUp

Simple, but strong, flat hook for use with 2" utility and tie-down straps. Saddle protects the material and reduces the risk of fraying under load. Rated for a 3,335 lb Load limit.

• Accessories and Parts
• Tie Down Straps
• Hooks
• Flat Hook
• Durabilt

Great for vehicle recovery use in the field, this simple J-style tow hook is easily attached and quickly removed. The 15" long hook has a clevis pin attachment for your Grade 70 (6,600 WLL) or Grade 80 (7,100 WLL) 3/8" chain.

• Accessories and Parts
• Tow Straps and Recovery Straps
• Hooks
• J-Hooks
• Durabilt

Add this slip hook to your 5/16", Grade 70 chain as a secure connector for tying down heavier cargo or equipment. After installing, you can clip the hook onto a fixed point on your equipment or trailer. Integrated, spring-loaded safety latch.

• Accessories and Parts
• Car Tie Down Straps
• Clevis Hooks
• 4700 lbs GTW
• Durabilt

Add this hook to your 3/8" Grade 70 chain to add a secure connection point when tying down heavier cargo or equipment. After installing, use the grab hook to shorten a chain length or attach it to a fixed point on your equipment or trailer.

• Accessories and Parts
• Car Tie Down Straps
• Clevis Hooks
• 6600 lbs GTW
• Durabilt

Add this slip hook to your 3/8", Grade 70 chain as a secure connector for tying down heavier cargo or equipment. After installing, you can clip the hook onto a fixed point on your equipment or trailer. Integrated, spring-loaded safety latch.

• Accessories and Parts
• Car Tie Down Straps
• Clevis Hooks
• 6600 lbs GTW
• Durabilt

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• LH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter