New Arrivals

Multipurpose cable lets you wire a solar panel with Anderson connectors to a solar charge controller with hardwire inputs. Also can be used for adding extra cable length to solar panels, or connecting to chargers or battery management systems.

• Accessories and Parts
• Solar Charge Controllers
• Cables and Connectors
• Adapters
• Redarc

Got a mid-vehicle battery setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 14'9" apart. Made for the Redarc BCDC Alpha 25A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Need to get your PowerDock wired up for your next adventure? This kit makes it easy with color-coded cables, tough hardware, and room to customize. It's built for rough trails, so you can get set up and get going in no time!

• Accessories and Parts
• Portable Chargers
• Cables and Cords
• Redarc

Side mounts work with corner mounts (RED79VR - sold separately) to attach single or multiple Redarc solar panels to an RV or boat. Attach mount to surface using a silicon adhesive or common fasteners.

• Accessories and Parts
• RV Solar Panels
• Mounting Hardware
• Redarc

Got a rear-vehicle setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 21"4" apart. Made for the Redarc BCDC Alpha 25A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Beach, campsite, or worksite - take your adventures off-grid! This all-in-one kit makes connecting your PowerDock a cinch. Hook up solar panels, power up anywhere, and rely on rugged Aussie durability to tackle the wild.

• Accessories and Parts
• Portable Chargers
• Cables and Cords
• Redarc

Replaces the latch for your Pace Edwards JackRabbit hard tonneau cover (311-JRC0303).

• Accessories and Parts
• Tonneau Cover
• Latches
• Pace Edwards JackRabbit
• Pace Edwards

Replaces the reel/ spring assembly for Pace Edwards tonneau covers.

• Accessories and Parts
• Tonneau Cover
• Reel
• Pace Edwards JackRabbit
• Pace Edwards UltraGroove
• Pace Edwards SwitchBlade
• Pace Edwards

Replaces the fabric panel with latch for your Pace Edwards Switchblade tonneau cover (SW2105).

• Accessories and Parts
• Tonneau Cover
• Panels
• Pace Edwards SwitchBlade
• Pace Edwards

Replaces the cover with handle for your Pace Edwards JackRabbit retractable tonneau cover (TR2089 or JRF89A09).

• Accessories and Parts
• Tonneau Cover
• Tarps
• Pace Edwards JackRabbit
• Pace Edwards

Fits 2019 - 2025 Ram 1500 with 5-1/2' beds without RamBox. Replaces the tarp for your Pace Edwards JackRabbit hard truck bed cover (JRDA24A55).

• Accessories and Parts
• Tonneau Cover
• Tarps
• Pace Edwards JackRabbit
• Pace Edwards

Replaces the standard rails for your Pace Edwards JackRabbit hard tonneau cover (JRC3250 or FMC3250).

• Accessories and Parts
• Tonneau Cover
• Rails
• Pace Edwards JackRabbit
• Pace Edwards

Bolt this bike-rack accessory onto your hitch-mounted cargo carrier that has a mesh bottom to easily and safely transport up to 3 bikes. Front wheel of bike slips into metal loop. Secure bike(s) to cargo carrier with include tie-down strap.

• Accessories and Parts
• Hitch Cargo Carrier
• Flat Carrier Parts
• Bike Carrier
• Ultra-Fab Products

Tired of your jack sinking or your trailer feeling unsteady? This footpad adds a wide base for solid support on gravel, grass, or dirt. Fits jacks with 2-1/4" outer diameter tubing and 2" inner tubing for a steady setup every time you park.

• Accessories and Parts
• Trailer Jack
• Camper Jacks
• Jack Foot
• Ultra-Fab Products

Add this LED third brake light to your Outlander soft truck topper to make your truck more visible to vehicles behind you. Connects to a 12-volt power source and mounts on the rear bow of your truck topper. Water-resistant seal prevents damage.

• Accessories and Parts
• Truck Topper
• Lights
• Outlander

Keep your stuff safe and secure! This hitch lock set includes a dual locking pin and a locking hitch pin. Works with all Weigh Safe 2", 2-1/2", and 3" ball mounts with a 5/8" pin hole.

• Accessories and Parts
• Drop Hitch
• Trailer Hitch Ball Mount
• Locks
• Locking Pin
• Weigh Safe

Keep your stuff safe and secure! This trailer lock set has a padlock, an adjustable coupler latch lock, and an adjustable coupler ball lock. Works with all Weigh Safe 2", 2-1/2", and 3" ball mounts with a 5/8" pin hole.

• Accessories and Parts
• Drop Hitch
• Trailer Hitch Ball Mount
• Locks
• Locking Pin
• Weigh Safe

Only for use with 8.5K and 12.5K systems, this shank offers up to an 8" drop and an 8-1/2" rise for your Weigh Safe True Tow weight distribution hitch. Measures 11" long and fits 2" x 2" receivers.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1100 lbs TW
• Fits 2 Inch Hitch
• Square - 8 Inch Drop
• Square - 8 Inch Rise
• Weigh Safe

Replacement retaining pin attaches the hitch ball to the platform of your steel Weigh Safe ball mount. The pin slides into the back of the platform and through the ball's shank. Pull ring allows for easy removal when swapping out hitch balls.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Pins and Clips
• Weigh Safe

Keep your stuff safe and secure! This hitch lock set includes a locking hitch pin, an adjustable coupler latch lock, and a 2 padlocks. Works with all Weigh Safe 2", 2-1/2", and 3" ball mounts with a 5/8" pin hole.

• Accessories and Parts
• Drop Hitch
• Trailer Hitch Ball Mount
• Locks
• Locking Pin
• Weigh Safe

Replace or upgrade your dual-sided tow ball. Remove the tow ball pin, take out your old ball, and drop this new one into place. Now you can tow up to 8,000 lbs with the 2" ball or up to 21,000 lbs with the 2-5/16" ball.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Balls
• Dual Ball
• 2 Inch Ball
• 2-5/16 Inch Ball
• Weigh Safe

Replace the gauge on your steel Weigh Safe 2" hitch with this kit.

• Accessories and Parts
• Drop Hitch
• Trailer Hitch Ball Mount
• Scale
• Weigh Safe

Keep your stuff safe and secure! This hitch lock set includes a locking hitch pin and an adjustable coupler latch lock. Works with all Weigh Safe 2", 2-1/2", and 3" ball mounts with a 5/8" pin hole.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Locks
• Locking Pin
• Weigh Safe

This replacement retaining pin attaches the hitch ball to the platform of your Weigh Safe ball mount. The pin slides into the back of the platform and through the ball's shank. Pull ring allows for easy removal when swapping out hitch balls.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Pins and Clips
• Weigh Safe