New Arrivals

Replaces the sealing gasket for your Diode Dynamics C1 LED light pod.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Gasket
• Diode Dynamics

Replaces the clear red lens on your Stage Series rock light. Can also be used as an alternative to a diffused red lens, or for other colors so go wild! Lens snaps in place for easy installation.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Lens
• Diode Dynamics

Add this slip hook to your 3/8", Grade 70 chain as a secure connector for tying down heavier cargo or equipment. After installing, you can clip the hook onto a fixed point on your equipment or trailer. Integrated, spring-loaded safety latch.

• Accessories and Parts
• Car Tie Down Straps
• Clevis Hooks
• 6600 lbs GTW
• Durabilt

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• LH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Protect your brakes from dust and grime with this dust shield. Works for your 12-1/4" X 2-1/2" brakes for 7.2K axles. The 4-hole mounting pattern makes it easy to install. Painted finish provides a level of corosion resistance.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• Electric Drum Brakes
• Dust Shield
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Replaces (1) 3-1/2" x 5/8"-18 Dexter Axle press-in wheel stud for 8K to 12K disc brakes or idler hubs with 5/8" studs.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Hubs and Drums
• Trailer Tires and Wheels
• Wheel Studs
• 5/8 Inch Diameter
• Drive-In Stud
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• Solenoid
• Dexter

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• RH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace a worn or leaking copper washer on your Dexter disc brake caliper. This 7/16" crush washer provides a tight, reliable seal between the banjo fitting and caliper to help prevent brake fluid leaks in your hydraulic braking system.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Hardware
• Caliper Parts
• Washers
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Free-backing, hydraulic trailer brake assembly won't engage when you reverse, even if your hydraulic actuator is activated. Mounting flanges have a 5-bolt pattern. Fits 16" and larger wheels. Corrostion-resistance is ideal for boat trailers.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• RH
• 12000 lbs
• Brake Assembly
• 12 x 2 Inch Drum
• Dexter

Replaces 1 caliper retaining shoulder bolt on your Dexter 10K and 12K hydraulic disc brake caliper.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 6000 lbs
• 8000 lbs
• 7000 lbs
• Caliper Parts
• Hardware
• Bolts
• Dexter

Replacement zerk for trailer hubs with Dexter Axle EZ Lube spindles

• Accessories and Parts
• Trailer Spindles
• Grease Zerk
• Dexter Axle

This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with single or tandem-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Free-backing, hydraulic trailer brake assembly won't engage when you reverse, even if your hydraulic actuator is activated. Mounting flanges have a 5-bolt pattern. Fits 16" and larger wheels. Corrostion-resistance is ideal for boat trailers.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• LH
• 12000 lbs
• Brake Assembly
• 12 x 2 Inch Drum
• Dexter

Replaces the "D" washers, retainer nuts, and hex nuts needed to secure the brake hubs on your Dexter trailer axle manufactered after June of 2002. Includes 2 "D" washers, 2 retainer nuts, and 2 hex nuts.

• Accessories and Parts
• Trailer Spindles
• Trailer Axles
• Trailer Suspension Parts
• Spindle Retainer Kit
• Dexter

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• Adapters
• Deutsche Hydrapro

Heavy-duty replacement support brackets fit Curt TruTrack 2P weight distribution systems with integrated active sway control. Allows you to mount your spring bars on trailer frames up to 10".

• Accessories and Parts
• Weight Distribution Hitch
• Sway Control Parts
• Brackets
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 4,200 lbs and a working load limit of 1,400 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 3/16 Inch Diameter
• 4200 lbs
• Wire Rope
• CURT

Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 1/2" chains. 11,900-lb Load limit.

• Accessories and Parts
• Trailer Safety Chains
• Safety Chain Parts
• Quick Links
• Brophy