New Arrivals

Designed to work with your etrailer scissor jacks, this unique socket is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. Works with 3/8" drill bits.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Tools
• Socket
• etrailer

Replacement right/street side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.

• Accessories and Parts
• Trailer Jack
• Legs
• etrailer

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• Adapters
• Deutsche Hydrapro

Need a tough, reliable connection from your actuator to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Hydraulic Drum Brakes
• Disc Brakes
• 20 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

The Maxx coat on this disc brake is three times more durable than Dacromet - perfect for coastal or snowy areas. Assembly comes with pre-installed inner (25580) and outer (02475) bearings, inner (25520) and outer (02420) races, and seal (GS-2250DL).

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• LH
• RH
• 7000 lbs
• Brake Assembly
• Hub and Rotor Assembly
• DeeMaxx

Replaces the stainless steel bolt for your 8K DeeMaxx disc brake bracket. 1/2"-20

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Hardware
• Nuts
• DeeMaxx

Need a solid replacement lug nut? This chrome acorn lug nut keeps your wheels snug and secure. The closed-end bulge design ensures a tight fit, while the chrome finish stands up to rust and road grime for the long haul.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Golf Cart Tires and Wheels
• Wheel Lug Nut
• 5/8 Inch Wheel Bolt
• Acorn Nut
• 60-Degree Cone
• Chrome-Plated Steel
• DeeMaxx

Grade 8 wheel stud fits DeeMaxx 13" hub-and-rotor assemblies, but its standard 9/16"-18 thread size will fit other hub assemblies just as well.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Hubs and Drums
• Trailer Tires and Wheels
• Wheel Studs
• 9/16 Inch Diameter
• Drive-In Stud
• DeeMaxx

Need a tough, reliable connection from your caliper to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Disc Brakes
• Hydraulic Drum Brakes
• 4 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

Replace the power unit for your etrailer or Ram hydraulic trailer jack or scissor hoist system. Dual-action system powers both up and down. Reservoir has 8-qt capacity. Includes remote control.

• Accessories and Parts
• Trailer Jack
• Power Unit
• etrailer

10-1/2" x 13-3/4". Tired of the rain damaging your electric tongue jack? Slip this weatherproof cover over your jack and secure it with a simple drawstring to keep the elements at bay. Fits most brands and styles of electric A-frame jacks.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Covers
• etrailer

Keyed alike lock set includes anti-rattle hitch lock to secure your 2" hitch-mounted bike rack to your hitch, 10' cable lock to secure your bike to the rack, and extension lock for Benton 4-bike platform rack.

• Accessories and Parts
• Bike Locks
• Trailer Hitch Lock
• Rack Specific Locks
• Keyed Alike
• Steel
• Fits 2 Inch Hitch
• For Benton Racks
• 2-5/8 Inch Span
• etrailer

This cage extension adds an extra foot to each side of your etrailer cargo carrier cage. 6 panels and hardware included.

• Accessories and Parts
• Hitch Cargo Carrier
• RV Cargo Carrier
• Flat Carrier Parts
• Cargo Cage Extension
• etrailer

Replaces the cross shaft on your etrailer or Ram fifth-wheel landing gear (RVLG-8000).

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Cross Shaft
• etrailer

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

Heavy-duty replacement support brackets fit Curt TruTrack 2P weight distribution systems with integrated active sway control. Allows you to mount your spring bars on trailer frames up to 10".

• Accessories and Parts
• Weight Distribution Hitch
• Sway Control Parts
• Brackets
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 4,200 lbs and a working load limit of 1,400 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 3/16 Inch Diameter
• 4200 lbs
• Wire Rope
• CURT

Replace the lost or damaged center pin for your Curt PowerRide fifth-wheel trailer hitch. Pin secures the 5th wheel head to the hitch body.

• Accessories and Parts
• 5th Wheel Hitch
• Pins and Clips
• CURT

Replace a lost or damaged bracket or install one in a second vehicle to easily transfer your Curt NEXT brake controller. The low-profile design installs above or below the dash and includes multiple mounting options for a secure, unobtrusive fit.

• Accessories and Parts
• Trailer Brake Controller
• Mounting Hardware
• Brackets
• CURT

Heavy-duty replacement support brackets fit Curt TruTrack 2P weight distribution systems with integrated active sway control. Allows you to mount your spring bars on trailer frames up to 8".

• Accessories and Parts
• Weight Distribution Hitch
• Frame Bracket
• Brackets
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 5,600 lbs and a working load limit of 1,865 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 7/32 Inch Diameter
• 5600 lbs
• Wire Rope
• CURT

Replaces the rotary knob for your Curt Spectrum trailer brake controller (C51170). Dash-mounted knob keeps your vehicle interior looking sleek while giving you easy access to the brake controller.

• Accessories and Parts
• Trailer Brake Controller
• Control Knob
• CURT

Replaces the caliper-mounting bracket for you a 10-16K Dexter/Lippert dual wheel axle, fits 11" rotor with 7 bolt flange.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 16000 lbs
• Caliper Parts
• Hardware
• Mounting Brackets
• DeeMaxx

Need a tough, reliable connection from your actuator to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Trailer Brakes
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• 6 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx