New Arrivals
Redarc BCDC Alpha 25A Rear-Vehicle Install Wiring Kit
Got a rear-vehicle setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 21"4" apart. Made for the Redarc BCDC Alpha 25A.
- Accessories and Parts
- Battery Charger
- Battery Charger Install Kit
- Redarc
Complete Installation Kit for Redarc PowerDock Docking Station
In Stock
Beach, campsite, or worksite - take your adventures off-grid! This all-in-one kit makes connecting your PowerDock a cinch. Hook up solar panels, power up anywhere, and rely on rugged Aussie durability to tackle the wild.
- Accessories and Parts
- Portable Chargers
- Cables and Cords
- Redarc
Redarc BCDC Alpha 50A Side-by-Side Engine Bay Wiring Kit
Got batteries close together? This kit has pre-crimped cables, fuses, and connectors for batteries less than 5' apart. Made for the Redarc BCDC Alpha 50A.
- Accessories and Parts
- Battery Charger
- Battery Charger Install Kit
- Redarc
Inverter Connection Cable for Redarc GoBlock Portable Power Station
In Stock
Power your adventures with the GoBlock Inverter Connector Cable! Effortless, plug-and-play connection to your 400W Redarc inverter keeps you charged up, off-grid, and ready for the wild. Built tough, so you can explore worry-free!
- Accessories and Parts
- Portable Chargers
- Cables and Cords
- Redarc
Redarc Water Tank Sensor Kit for TVMS Prime - Wire Loom and Sensors
In Stock
Wire loom and sensors allow you to monitor levels in your fresh-water tank with your RedVision Total Vehicle Management System. Reads tank state in 20% increments.
- Accessories and Parts
- Smart RV
- Sensors
- Redarc
Redarc Tank Sensor for TVMS Rogue - 7-15/16" Long
In Stock
Expand your TVMS Rogue smart RV system with sensors for monitoring your holding tanks. Safe to use in with fresh water, waste water, or fuel tanks.
- Accessories and Parts
- Smart RV
- Sensors
- Redarc
Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
Mounting panel creates a factory look for your Nissan or Mercedes dash when you install the control knob from your Tow-Pro Elite brake controller.
- Accessories and Parts
- Trailer Brake Controller
- Control Knob Mounting Panel
- Vehicle Specific
- Redarc
Redarc BCDC Charger Mounting Bracket for Toyota Landcruiser 200
Add this bracket to your 2008 or newer Toyota Landcruiser 200 to ensure your Redarc BCDC has plenty of airflow to keep it cool so it can keep your batteries charged. Mounts with included installation hardware.
- Accessories and Parts
- Battery Charger
- Mounting Hardware
- Brackets
- Redarc
Redarc BCDC Alpha 50A Across Engine Bay Wiring Kit
If your start battery and secondary battery are at opposite sides of your engine bay, this wiring kit gives you everything you need to make connections with your Redarc Alpha 50A DC battery charger.
- Accessories and Parts
- Battery Charger
- Battery Charger Install Kit
- Redarc
Storage Bag for Redarc GoBlock Portable Power Station
In Stock
Keep your GoBlock safe on every adventure! The transit bag's rugged Oxford polyester material, rubber feet, and handy pockets make it the perfect travel buddy. Dust, dirt, or rough trails? No problem. Grab your gear and go!
- Accessories and Parts
- Portable Chargers
- Storage Bag
- Redarc
50-Amp MIDI Fuse Kit for Redarc In-Vehicle TVMS Rogue or Manager30
Fuse kit contains 2 high-quality, 50-amp fuses with a protective holder. Works with Redarc TVMS Rogue (RED92RR) or Manager30 (RED88FR, RED93FR). Fuses protect your setup from potentially damaging overcurrent caused by short circuits or overloads.
- Accessories and Parts
- Smart RV
- Fuses
- Redarc
Redarc BCDC Charger Universal Mounting Bracket
This bracket is designed to fit any vehicle's mounting points in the engine bay. Once mounted with the included hardware, it will help ensure your Redarc BCDC has airflow around it to keep it cool.
- Accessories and Parts
- Battery Charger
- Mounting Hardware
- Brackets
- Redarc
Redarc Water Tank Sensor Wiring for TVMS Prime - Wire Loom only
In Stock
Wire loom allows you to connect your RedVision Total Vehicle Management System Prime to the existing sensors on your fresh-water tank.
- Accessories and Parts
- Smart RV
- Sensors
- Wiring
- Redarc
Redarc Tank Sensor for TVMS Rogue - 6-15/16" Long
In Stock
Expand your TVMS Rogue smart RV system with sensors for monitoring your holding tanks. Safe to use in with fresh water, waste water, or fuel tanks.
- Accessories and Parts
- Smart RV
- Sensors
- Redarc
Redarc BCDC Charger Mounting Bracket for Ford Ranger and Raptor
Add this bracket to your 2022 or newer V6 Ford Ranger or Raptor to ensure your Redarc BCDC has plenty of airflow to keep it cool so it can keep your batteries charged. Mounts with included installation hardware.
- Accessories and Parts
- Battery Charger
- Mounting Hardware
- Brackets
- Redarc
Redarc MC4 to Bare Cable Adapter - 5
In Stock
Multipurpose cable lets you wire a solar panel with MC4 connectors to a solar charge controller with hardwire inputs. Also can be used for adding extra cable length to solar panels or connecting to chargers or battery management systems.
- Accessories and Parts
- Solar Charge Controllers
- Cables and Connectors
- Adapters
- Redarc
Redarc BCDC Alpha 25A Side-by-Side Engine Bay Wiring Kit
If your start battery and secondary battery are close to each other in your engine bay, this wiring kit gives you everything you need to make connections with your Redarc Alpha 25A DC battery charger.
- Accessories and Parts
- Battery Charger
- Cables
- Side-by-Side Wiring Cable
- Redarc
Redarc BCDC Alpha 50A Rear-Vehicle Install Wiring Kit
Got a rear-vehicle setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 21"4" apart. Made for the Redarc BCDC Alpha 50A.
- Accessories and Parts
- Battery Charger
- Battery Charger Install Kit
- Redarc
Lippert 3/8" - 16 x 3-1/2" Carriage Bolt
In Stock
Mounts the front jacks of the Lippert Ground Control 3.0 to your motor home.
- Accessories and Parts
- Camper Jacks
- Hardware
- Bolts
- Lippert
Replacement Support Arm for 10' Wide Thule Omnistor 5200 Motorized Awning
Replaces the left or right support arm for your 10' wide Thule Omnistor 5200 motorized awning.
- Accessories and Parts
- RV Awnings
- Arms
- Support Arms
- Lippert
Replacement Pop Up Camper Roller Assembly Kit
This kit replaces the roller assembly for your pop up camper.
- Accessories and Parts
- Camper Jacks
- Roller Assembly
- Lippert
Replacement Kwikee Electric Motor Assembly with 14NM IMGL RV Steps
Replaces the motor assembly for your Kwikee electric RV steps. Works for 14 NM IMGL RV electric steps. Includes motor assembly and screws.
- Accessories and Parts
- RV Steps
- Motors
- Lippert
Flush Mount Grommet Bracket for 3/4" Round LED Trailer Lights - Black Plastic - Surface Mount
Mount a 3/4" round trailer light with this flush bracket. Compatible with dozens of Optronics LED models. Black plastic housing resists corrosion. Surface mount design installs easily. Light and mounting hardware sold separately.
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Grommet
- Diamond
- Optronics
Optronics' Black Surface-Mount License Plate Bracket - Durable Plastic - No Light
In Stock
Black, heavy-duty plastic license plate bracket lets you mount your plate on a flat surface. Durable design handles exposure to the elements. Easy bolt-on installation. No light or wiring included.
- Accessories and Parts
- License Plates and Frames
- Mounting Hardware
- Brackets
- Optronics