New Arrivals

Trailer axle measures 49-1/2" from hub face to hub face and 38-7/16" from Spring center to spring center. Includes fully pre-assembled studded hubs. Made for a 40" frame.

• Trailer Suspension Parts
• Trailer Axles
• Leaf Spring Suspension
• Marine Grade
• Idler Hubs
• 1800 lbs
• 5 on 4-1/2 Inch
• 49 Inch Hub Face
• No Drop or Lift
• CE Smith

7" Wide x 20" long x 6" tall. Excellent for your boat trailer, this aluminum fender can stand up to rust, corrosion, and scratches. Easily bolt fender onto your trailer.

• Trailer Fenders
• No Step
• 8 Inch Wheels
• 10 Inch Wide
• 22 Inch Long
• Aluminum
• For Single-Axle Trailers
• Diamond Plate
• CE Smith

6" Long triangular equalizer connects double-eye springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Designed primarily for RVs and mobile homes.

• Trailer Suspension Parts
• Standard Equalizer
• Boat Trailer
• Car Hauler
• Snowmobile Trailer
• Camper
• Utility Trailer
• Double Eye Springs
• 6 Inch Long
• Tandem Axle
• Triple Axle
• CE Smith

• Trailer Suspension Parts
• Spring Seats
• Camper
• Utility Trailer
• Car Hauler
• 3500 lbs
• Square Axle - 2 Inch
• CE Smith

Required in most states, a safety chain acts as a backup if your trailer becomes disconnected from your tow vehicle. Attach the middle link of this zinc-coated steel chain to your trailer's coupler, and then hook the S-hooks to your hitch.

• Trailer Safety Chains
• Safety Chains
• Towing a Trailer
• 24 Inch Long
• 2000 lbs
• Pair of Chains
• Standard Chains
• CE Smith

Replace the keel roller on your boat trailer with this self-centering, polyurethane roller that automatically guides your boat to the center of your trailer as it rolls forward.

• Boat Trailer Parts
• Rollers
• Keel Roller
• 2-13/16 Inch Diameter
• 11-3/8 Inch Long
• Fits 5/8 Inch Shaft
• CE Smith

Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal (171225 DL/TB), and a cotter pin.

• Trailer Bearings Races Seals Caps
• Bearings
• Standard Bearings
• Bearing Kits
• 1.000 Inch I.D.
• 1.78 Inch O.D.
• Bearing LM11949
• Race LM11910
• CE Smith

11" Long x 5/8" diameter steel shaft with zinc plating for 10" rollers replaces a worn-out roller shaft on your boat trailer. Requires 2 cap nuts for mounting (CE10801A); sold separately.

• Boat Trailer Parts
• Rollers
• Roller Shafts
• 5/8 Inch Diameter
• 11 Inch Long
• CE Smith

Replacement CE Smith spindle welds onto your trailer axle.

• Trailer Spindles
• Standard Spindle
• 1-3/8 Inch Diameter
• CE Smith

Of all the hitches we tested, this is our favorite. It fixes sway, creates superb handling, and levels your ride - silently. Rotating chain-style, clamp-on brackets make setup easy. Max 4-1/2" drop, 10-1/2" rise. Made in the USA, too!

• Weight Distribution Hitch
• WD With Sway Control
• Severe Sway
• Includes Shank
• Blue Ox

Tucked into the wall and sealed up tight, this docking station keeps your hookups organized and out of sight. Flip the door, hook up, and you'refree to kick back - your campsite setup just got way easier.

• RV Water Inlets
• City Fill Inlet
• Recessed Mount
• 2-1/8 Inch Deep
• Plastic
• Black
• B and B Molders

• RV Vents and Fans
• Vent
• Ceiling Vent
• No Fan
• Plastic
• White
• B and B Molders

Mount it outside your RV or in your wet bay and hit the ground running - this panel keeps all your water and cable hookups in one spot with capped ports to keep things clean. Less fiddling, more chilling.

• RV Water Inlets
• Gravity Fill Inlet
• City Fill Inlet
• Flush Mount
• Plastic
• Black
• B and B Molders

• RV Trim
• Gutter Parts
• Beige
• B and B Molders

Tucked into the wall and sealed up tight, this docking station keeps your hookups organized and out of sight. Flip the door, hook up, and you'refree to kick back - your campsite setup just got way easier.

• RV Water Inlets
• City Fill Inlet
• Recessed Mount
• 3-3/4 Inch Deep
• Plastic
• Black
• B and B Molders

• RV Trim
• Gutter Parts
• Black
• B and B Molders

• RV Trim
• Gutter Parts
• Beige
• B and B Molders

Tucked into the wall and sealed up tight, this docking station keeps your hookups organized and out of sight. Flip the door, hook up, and you'refree to kick back - your campsite setup just got way easier.

• RV Water Inlets
• City Fill Inlet
• Recessed Mount
• 3-3/4 Inch Deep
• Plastic
• Black
• B and B Molders

Mount it outside your RV or in your wet bay and hit the ground running - this panel keeps all your water and cable hookups in one spot with capped ports to keep things clean. Less fiddling, more chilling.

• RV Water Inlets
• City Fill Inlet
• Flush Mount
• Plastic
• Black
• B and B Molders

• RV Vents and Fans
• Vent
• Plumbing Vent
• No Fan
• Plastic
• White
• B and B Molders

• RV Trim
• Gutter Parts
• Beige
• B and B Molders

Tucked into the wall and sealed up tight, this docking station keeps your hookups organized and out of sight. Flip the door, hook up, and you'refree to kick back - your campsite setup just got way easier.

• RV Water Inlets
• City Fill Inlet
• Recessed Mount
• 3-3/4 Inch Deep
• Plastic
• Black
• B and B Molders

Tucked into the wall and sealed up tight, this docking station keeps your hookups organized and out of sight. Flip the door, hook up, and you'refree to kick back - your campsite setup just got way easier.

• RV Water Inlets
• City Fill Inlet
• Recessed Mount
• 2-1/8 Inch Deep
• Plastic
• Black
• B and B Molders

• RV Vents and Fans
• Vent
• Ceiling Vent
• No Fan
• Plastic
• White
• B and B Molders