New Arrivals

Got a mid-vehicle battery setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 14'9" apart. Made for the Redarc BCDC Alpha 25A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Need to get your PowerDock wired up for your next adventure? This kit makes it easy with color-coded cables, tough hardware, and room to customize. It's built for rough trails, so you can get set up and get going in no time!

• Accessories and Parts
• Portable Chargers
• Cables and Cords
• Redarc

Side mounts work with corner mounts (RED79VR - sold separately) to attach single or multiple Redarc solar panels to an RV or boat. Attach mount to surface using a silicon adhesive or common fasteners.

• Accessories and Parts
• RV Solar Panels
• Mounting Hardware
• Redarc

Got a rear-vehicle setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 21"4" apart. Made for the Redarc BCDC Alpha 25A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Beach, campsite, or worksite - take your adventures off-grid! This all-in-one kit makes connecting your PowerDock a cinch. Hook up solar panels, power up anywhere, and rely on rugged Aussie durability to tackle the wild.

• Accessories and Parts
• Portable Chargers
• Cables and Cords
• Redarc

Take your rukRak cargo basket on the move by installing this handy wagon accessory. Simply detach your basket from the carrier frame and use the convenient grab handle to get your gear rolling. Pneumatic balloon wheels cover any terrain.

• Modular Hitch Rack
• Accessories and Parts
• rucRack Cargo Carrier
• Accessory Only
• Wagon Add-On
• rucRak

Replaces the side rails for your Retrax XR hard tonneau cover. Fits RetraxPRO XR (T-80233) tonneau covers. Hardware included.

• Accessories and Parts
• Tonneau Cover
• Rails
• Retrax XR
• Retrax

These 5-mm thick Quick Mount spacers bolt to the tops of 6 legs to level a crossbar on your vehicle's roof.

• Accessories and Parts
• Roof Rack
• Crossbars
• Leg Spacers
• Rhino Rack

Replaces 1 of the custom-fit pads for your Rhino-Rack 2500 Series roof rack fit kit. Works for 2008 to 2016 Ford F-250 and F-350 Super Cab 4-door trucks.

• Accessories and Parts
• Roof Rack
• Tower Parts
• Pads
• Rhino Rack

Replaces 1 missing or damaged 70" Reconn-Deck bar for your Rhino-Rack Reconn-Deck truck bed rack.

• Accessories and Parts
• Ladder Racks
• Crossbars
• Rhino Rack

Missing the upper clamp on your Rhino-Rack multi-purpose holder? This replacement restores the grip you need to carry your skis, rods, or paddles safely. Just pop it in place and get your gear rack back in actionno need to replace the whole thing.

• Accessories and Parts
• Fishing Rod Holders
• Clamps
• Rhino Rack

These 5-mm thick Quick Mount spacers bolt to the tops of 4 legs to level a crossbar on your vehicle's roof.

• Accessories and Parts
• Roof Rack
• Crossbars
• Leg Spacers
• Rhino Rack

Replaces the lower bracket needed to install your Rhino-Rack fishing rod or ski carrier to your roof rack crossbars. Works with RR572, RR573, RR574, and RR576.

• Accessories and Parts
• Fishing Rod Holders
• Ski and Snowboard Racks
• Clamps
• Brackets
• Rhino Rack

Some jobs require a smoother approach. Maximize your HD Flatbed Ramps for easier, safer loading. Designed for professionals, these simple, easily managed extenders inspire confidence and commitment when loading a low-profile vehicle onto your truck.

• Accessories and Parts
• Car Ramps
• Ramp Extensions
• Race Ramps

Reduce the approach angle for your Portable Pit Stop and Restyler Ramps by making it smoother to load low-clearance vehicles. These foldable XTenders are easy to set up, and allow you to relax and feel confident while loading up and backing down.

• Accessories and Parts
• Car Ramps
• Ramp Extensions
• Race Ramps

Replace a lost or damaged endcap on your Romik REC running board. Replaces the front endcap on driver's-side board or rear endcap on passenger's-side board. Fits silver or black running boards.

• Accessories and Parts
• Nerf Bars - Running Boards
• End Caps
• Romik

Replace a lost or damaged endcap on your Romik RB2 V2 running board manufactured 2021 or later. Replaces the front endcap on driver's-side board or rear endcap on passenger's-side board.

• Accessories and Parts
• Nerf Bars - Running Boards
• End Caps
• Romik

Replace a lost or damaged endcap on your Romik ROF/ROB/RPD running board or ROF/ROB/RPD hitch step. Replaces the front endcap on driver's-side board or rear endcap on passenger's-side running board, or driver's-side edge of hitch step.

• Accessories and Parts
• Nerf Bars - Running Boards
• End Caps
• Romik

Replace a lost or damaged endcap on your Romik RB2 V2 running board manufactured 2021 or later. Replaces the front endcap on passenger's-side board or rear endcap on driver's-side board.

• Accessories and Parts
• Nerf Bars - Running Boards
• End Caps
• Romik

Maintain the clean look of your running boards with trimmable rubber mounting bracket covers. Made for use with Romik's drop brackets, these covers conceal your brackets and match your running boards. Trim to fit with scissors. Includes 4 covers.

• Accessories and Parts
• Hitch Step
• Nerf Bars - Running Boards
• Bracket Covers
• Romik

Replace a lost or damaged endcap on your Romik ROF/ROB/RPD running board or ROF/ROB/RPD hitch step. Replaces the front endcap on passenger's-side or rear endcap on driver's-side running board, or passenger's-side edge of hitch step.

• Accessories and Parts
• Nerf Bars - Running Boards
• End Caps
• Romik

Replace a lost or damaged endcap on your Romik RZR running board or RZR hitch step in stainless steel. Replaces the front endcap on driver's-side board or rear endcap on passenger's-side running board, or driver's-side edge of hitch step.

• Accessories and Parts
• Hitch Step
• Nerf Bars - Running Boards
• End Caps
• Romik

Maintain the clean look of your running boards with trimmable rubber mounting bracket covers. Made for use with Romik's drop brackets, these covers conceal your brackets and match your running boards. Trim to fit with scissors. Includes 6 covers.

• Accessories and Parts
• Nerf Bars - Running Boards
• Hitch Step
• Bracket Covers
• Romik

Replace a lost or damaged endcap on your Romik RB2 running board manufactured prior to 2021. Replaces the front endcap on driver's-side board or rear endcap on passenger's-side board.

• Accessories and Parts
• Nerf Bars - Running Boards
• End Caps
• Romik