New Arrivals

You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.

• Accessories and Parts
• Battery Charger
• Cases
• CTEK Power Inc

You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.

• Accessories and Parts
• Battery Charger
• Cases
• CTEK Power Inc

You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.

• Accessories and Parts
• Battery Charger
• Cases
• CTEK Power Inc

In a busy workshop, efficiency is key. The Trolley Pro keeps your chargers, laptops, and testing equipment organized and mobile, so you can move seamlessly between tasks without missing a beat. Make sure your essential tools are always within reach.

• Accessories and Parts
• Battery Charger
• Workstation
• Smart Charge
• CTEK Power Inc

You invested in the CS Free to keep you powered up - now protect it. This case keeps your charger safe and organized. With a water-resistant design and padded interior, it ensures your charger and accessories stay secure wherever the road takes you.

• Accessories and Parts
• Battery Charger
• Portable Chargers
• Cases
• CTEK Power Inc

Simple, but strong, flat hook for use with 2" utility and tie-down straps. Saddle protects the material and reduces the risk of fraying under load. Rated for a 3,335 lb Load limit.

• Accessories and Parts
• Tie Down Straps
• Hooks
• Flat Hook
• Durabilt

Great for vehicle recovery use in the field, this simple J-style tow hook is easily attached and quickly removed. The 15" long hook has a clevis pin attachment for your Grade 70 (6,600 WLL) or Grade 80 (7,100 WLL) 3/8" chain.

• Accessories and Parts
• Tow Straps and Recovery Straps
• Hooks
• J-Hooks
• Durabilt

Add this slip hook to your 5/16", Grade 70 chain as a secure connector for tying down heavier cargo or equipment. After installing, you can clip the hook onto a fixed point on your equipment or trailer. Integrated, spring-loaded safety latch.

• Accessories and Parts
• Car Tie Down Straps
• Clevis Hooks
• 4700 lbs GTW
• Durabilt

Add this hook to your 3/8" Grade 70 chain to add a secure connection point when tying down heavier cargo or equipment. After installing, use the grab hook to shorten a chain length or attach it to a fixed point on your equipment or trailer.

• Accessories and Parts
• Car Tie Down Straps
• Clevis Hooks
• 6600 lbs GTW
• Durabilt

Add this slip hook to your 3/8", Grade 70 chain as a secure connector for tying down heavier cargo or equipment. After installing, you can clip the hook onto a fixed point on your equipment or trailer. Integrated, spring-loaded safety latch.

• Accessories and Parts
• Car Tie Down Straps
• Clevis Hooks
• 6600 lbs GTW
• Durabilt

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• LH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Protect your brakes from dust and grime with this dust shield. Works for your 12-1/4" X 2-1/2" brakes for 7.2K axles. The 4-hole mounting pattern makes it easy to install. Painted finish provides a level of corosion resistance.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• Electric Drum Brakes
• Dust Shield
• Dexter

Replaces (1) 3-1/2" x 5/8"-18 Dexter Axle press-in wheel stud for 8K to 12K disc brakes or idler hubs with 5/8" studs.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Hubs and Drums
• Trailer Tires and Wheels
• Wheel Studs
• 5/8 Inch Diameter
• Drive-In Stud
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• Solenoid
• Dexter

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• RH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace a worn or leaking copper washer on your Dexter disc brake caliper. This 7/16" crush washer provides a tight, reliable seal between the banjo fitting and caliper to help prevent brake fluid leaks in your hydraulic braking system.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Hardware
• Caliper Parts
• Washers
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Free-backing, hydraulic trailer brake assembly won't engage when you reverse, even if your hydraulic actuator is activated. Mounting flanges have a 5-bolt pattern. Fits 16" and larger wheels. Corrostion-resistance is ideal for boat trailers.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• RH
• 12000 lbs
• Brake Assembly
• 12 x 2 Inch Drum
• Dexter

Replaces 1 caliper retaining shoulder bolt on your Dexter 10K and 12K hydraulic disc brake caliper.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 6000 lbs
• 8000 lbs
• 7000 lbs
• Caliper Parts
• Hardware
• Bolts
• Dexter

Replacement zerk for trailer hubs with Dexter Axle EZ Lube spindles

• Accessories and Parts
• Trailer Spindles
• Grease Zerk
• Dexter Axle

Square tube welds onto your trailer. Works with 4" width inner tubes (sold separately). Pairs perfectly with the eZ-Latch gooseneck coupler DM43KV (sold separately).

• Accessories and Parts
• Gooseneck Coupler
• Outer Tube
• Demco