You lost your rear factory camera when you removed the tailgate, but you don't have to give up safety. This camera mounts on your license plate and plugs into your truck's harness to bring that view back to your screen when you back up.
Replaces the water pump switch for B&B RV Nautilus P3 or P4 panel water management panel. Replaces faulty switch on the Nautilus panel face. Includes single switch with 3-way wiring connectors.
Add this heavy-duty camera with a built-in heater to your Brandmotion monitor and stay safe in the winter. The heating element melts snow and ice, so you always get a clear rear view, even in the harshest weather.
You built your own setup, so you want a camera that's just as flexible. Add a wide backup view to your aftermarket display and see what's really behind you.
You lost your rear factory camera when you removed the tailgate, but you don't have to give up safety. This camera mounts on your license plate and plugs into your truck's harness to bring that view back to your screen when you back up.
This electric heat strip works with your R32 compatible AC unit (sold separately) to remove the chill from your RV or camper on cold or frosty mornings. Power cord and mounting hardware are included for easy, plug-and-play installation.
Coming soon - available February 2025. You'll need this air distribution box if you're upgrading your RV's AC to a 2025 ductless system with the new R32 refrigerant. The new ACs will not work with any systems from 2024 and earlier.
You'll need this air distribution box if you're upgrading your RV's AC to a 2025 ducted or ductless system with the new R32 refrigerant. New ACs will not work with any systems from 2024 or earlier.
Replace your lost or damaged Andersen 2-5/16" weight distribution hitch ball. Designed for use with Andersen weight distribution hitches, this replacement restores safe towing performance.
If your factory gooseneck hitch has a pop-in ball, this adapter is the missing piece to mount your Andersen Ultimate Connection Hitch and tow your 5th wheel. No adapter means no towing, so slap this bad boy in and hit the road with confidence.
Get the height your setup needs with this 14" square coupler tube for your Andersen Ultimate Connection. Extra height helps level your setup, improve clearance, and deliver the smooth towing experience you're after. Mounting bolts included.
This tire change kit makes swapping out a flat on your multi-axle trailer a total breeze. Just drive the good tire up onto the leveler to raise the adjacent tire up to 4" off the ground. You will be back on the road in no time.
Need more slack in your Andersen weight-distribution tension chains? Add up to 11-1/4" instantly with these extensions6 links plus a threaded coupler per side. Remove any links you dont need for a custom fit and smoother hitch setup.
This SAE to alligator clamps cable connects your 12V battery to your SAE power cable. Works with any 12V accessory that has a SAE connector on its power cord.
The sun is blazing, but your battery isn't. This solar panel lets you harness the sun to recharge your CS Free, keeping your battery and devices powered so you're never stranded off-grid. Just unfold the panel, position it, and power up.
You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.
You go to charge your battery only to realize your charger won't reach. This extension cable gives you an extra 8' of flexibility, so you can position your charger where it works best. No more stretching cables or parking at odd angles.
You're off-grid, miles from the nearest outlet, and your vehicle's battery needs a charge. These clamps let you power your CS Free directly from a 12V service battery, so you're never stranded. Just clamp, plug in, and charge anywhere.
You're ready to ride, but is your battery? This eyelet cable gives you an instant read on your battery's health with a simple LED system. A quick glance tells you if it's good to go or needs a charge - before you're stuck.
Your CS Free is built for portability, but when you're home, you need a safe spot for it. This mount keeps your charger secure in your garage. Mount it permanently or hang it temporarily - either way, your charger is ready when you need it.
Your charger is an essential tool, but where do you put it when you're working? This wall mount keeps your charger secure and within reach, whether mounted to a wall or hung on a vehicle door. It's just a smarter way to store your charger.