New Arrivals

Replace a worn or broken hinge on your Solid Fold 2.0 tonneau with this durable polypropylene tail hinge. Designed for a perfect fit, it restores smooth folding at the rear panel so your truck bed stays secure and easy to access.

• Accessories and Parts
• Tonneau Cover
• Hinges
• Extang Solid Fold 2.0
• Extang

Replace the tarp on your Extang Trifecta Signature 2.0 cover (EX94435) and get your truck bed protected again. Reuse your original hardware and rails for an easy install that gets you back on the road fastwith a clean, factory-style look.

• Accessories and Parts
• Tonneau Cover
• Tarps
• Extang Trifecta Signature 2.0
• Extang

Replaces the tarp for your Extang Trifecta Signature 2.0 soft tonneau cover (EX94460). Requires original hardware and bows for installation.

• Accessories and Parts
• Tonneau Cover
• Tarps
• Extang Trifecta Signature 2.0
• Extang

Fits 6' long bed 2016-Current Toyota Tacoma trucks. Replaces the tarp for your Extang Trifecta 2.0 soft tonneau cover (92835).

• Accessories and Parts
• Tonneau Cover
• Tarps
• Extang Trifecta 2.0
• Extang

Replaces the caliper-mounting bracket for you a 10-16K Dexter/Lippert dual wheel axle, fits 11" rotor with 7 bolt flange.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 16000 lbs
• Caliper Parts
• Hardware
• Mounting Brackets
• DeeMaxx

Need a tough, reliable connection from your actuator to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Trailer Brakes
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• 6 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

This 23' hose gives you the length to run a brake line from your actuator to the axle on longer trailers. The extra reach lets you make a full connection without adding couplers or mid-line fittings.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Hydraulic Drum Brakes
• Disc Brakes
• 23-1/3 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

This stainless steel acorn lug nut laughs in the face of rust. Perfect for saltwater use, it stays strong and rust-free. No chipping, no peeling, just a tough, reliable fit that shrugs off moisture, salt, and road grime for the long haul.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Golf Cart Tires and Wheels
• Wheel Lug Nut
• 5/8 Inch Wheel Bolt
• Acorn Nut
• 60-Degree Cone
• Stainless Steel
• DeeMaxx

New adventures are exciting, but leaving your bike unattended isn't. These wheel locks secure your bikes to the rack, deterring thieves and giving you peace of mind. Your ride will stay safe while you take a break or gear up for the next journey.

• Accessories and Parts
• Hitch Bike Racks
• Lock Parts
• Wheel Locks
• Crosstrack
• Hollywood Racks

If you leave everything on the trail and are completely gassed when you're done cycling, you're not gonna want to lift your bike onto a rack before heading home. The Crosstrack Ramp lets you to roll your ride into place and hit the road.

• Accessories and Parts
• Hitch Bike Racks
• Ramps
• Crosstrack
• Hollywood Racks

Replaces the end cap with reflector for Hollywood Racks RV Rider (HR1600 or HR1700) or Sport Rider (HR1400, HR1450, HR1450-E, HR1450-R, or HR1455-E) bike rack. Fits 2" square tubing.

• Accessories and Parts
• RV and Camper Bike Racks
• Hitch Bike Racks
• End Caps
• Sport Rider
• RV Rider
• Hollywood Racks

Cyclings supposed to be about the ride, not fighting with knobs or hunting for tools. These toolless adjustment dials let you switch wheel sizes with a quick twist, so your bike fits snug and you're rolling in seconds.

• Accessories and Parts
• Hitch Bike Racks
• Wheel Holds
• Knobs
• Crosstrack
• Hollywood Racks

Replaces the support bracket for your Hollywood Racks RV Rider (HR1600 or HR1700) or Sport Rider SE (HR1450E-Z or HR1455E-Z) bike rack. Does not include carriage bolts (sold separately).

• Accessories and Parts
• Hitch Bike Racks
• RV and Camper Bike Racks
• Hardware
• Brackets
• RV Rider
• Sport Rider
• Hollywood Racks

Replace the missing or damaged ramp for your Hollywood Racks Destination E so you can roll your heavy e-bikes on and off with ease. This direct replacement ramp connects to the end of the tray, then removes for storage.

• Accessories and Parts
• Hitch Bike Rack
• Ramps
• Destination
• Hollywood Racks

When you're hauling your prized bikes, staying visible matters. This LED bar lights up your brake signals, turn indicators, and flashers, so even if your ride runs past sunset, other drivers know exactly where you are and what you're doing.

• Accessories and Parts
• Hitch Bike Racks
• Lights
• Light Bar
• Crosstrack
• Hollywood Racks

Early starts, late returns - some adventures just don't stick to daylight hours. The Destination E LED Light Bar helps keep you visible when it counts, making sure other drivers see you, your vehicle, and the gear you're hauling.

• Accessories and Parts
• Hitch Bike Racks
• Lights
• Light Bar
• Destination
• Hollywood Racks

Kuat have partnered with Diode Dynamics to provide you with the best option for turning your unlit DEK into a fully lit Roof Platform Rack. Every Light Bar is equipped with five Diode Dynamics C2 Pro LED Pods encased in a custom-fabricated housing.

• Accessories and Parts
• Roof Rack
• Lights
• Light Bar
• Kuat

With this panel kit, you can turn your Kuat Ibex rack into a high-quality truck topper. This makes it easier to carry anything you don't want exposed to the weather.

• Accessories and Parts
• Truck Topper
• Ladder Racks
• Panels
• Kuat

Replaces a front wheel cradle on your Kuat Transfer V2 bike rack. Helps secure and stabilize your bike for travel. Mounting hardware included.

• Accessories and Parts
• Hitch Bike Racks
• Cradle and Arm Parts
• Cradles
• Transfer V2
• Kuat

Kuat have partnered with Diode Dynamics to provide you with the best option for turning your unlit DEK into a fully lit Roof Platform Rack. Every Light Bar is equipped with five Diode Dynamics C2 Pro LED Pods encased in a custom-fabricated housing.

• Accessories and Parts
• Roof Rack
• Lights
• Light Bar
• Kuat

Your Kuat Ibex truck bed rack is decked out with the panel kit, but now it's time to make room up top for your gear. These risers add 3" to 4" of lift to your crossbars.

• Accessories and Parts
• Ladder Racks
• Crossbars
• Riser
• Kuat

You outfitted your Kuat Ibex truck bed rack with panels for a secure, enclosed topper, but organization is just as important. This MOLLE panel mounts inside the door panel so you can mount gear.

• Accessories and Parts
• MOLLE Panels
• Ladder Rack
• Aluminum
• Black Powder Coat
• Kuat

These co-branded Kuat/Diode Dynamics covers feature a durable, rubberized design that fits securely over each DEK light pod, protecting them from damage while keeping you compliant with road regulations.

• Accessories and Parts
• Roof Rack
• Lights
• Lens
• Kuat

Replace a damaged power cable or finish wiring your Furrion Vision 1, Vision 2, or Vision S doorway camera. This cable is designed for use with Furrion camera brackets and plugs into your RVs 12V power source. Not compatible with Vision S+ systems.

• Accessories and Parts
• RV Camera System
• Cables and Cords
• Power Cord
• Furrion