bing tracking image

New Arrivals

Filters

Rear Hanger for 2" Slipper Spring - 1-1/4" Tall x 1" Long x 2-1/2" Wide

Our Price: $3.77
In Stock
When you pull your trailer down a gravel road or pull out after a full day at the lake, this rear hanger will support every mile. It holds your 2" slipper spring, so bumps and potholes dont get the best of your cargo.
  • Trailer Suspension Parts
  • Hangers
  • Camper
  • Car Hauler
  • Utility Trailer
  • Slipper Springs - 2 Inch
  • 1-1/4 Inch Tall
  • CE Smith

CE Smith 24-5/8" Slipper Leaf Spring - 250 lb Load - 1-3/4" Wide - Single Leaf - Steel

Our Price: $29.54
Swap worn springs with this CE Smith 24-5/8" slipper leaf spring. Built to handle 250-lb loads, it's perfect for light-duty trailers. Features 1-leaf steel construction, 1-3/4" width, and eye-radius end for 1/2" shackle bolt fit.
  • Trailer Suspension Parts
  • Trailer Leaf Springs
  • Slipper Springs
  • 1/2 Inch Eye
  • Bushing Not Included
  • 500 lbs
  • 1-3/4 Inch Wide
  • 24-5/8 Inch Long
  • Standard Grade
  • CE Smith

Single Axle Jeep Style Trailer Fender - 8" to 12" Wheels - Qty 1

Retail: $47.68
Our Price: $45.10
In Stock
Give your trailer a rugged touch that's more than just good looks. This Jeep-style fender keeps rocks, water, and debris from flying up on the road, so your cargo and everyone behind you stay protected.
  • Trailer Fenders
  • No Step
  • 10 Inch Wheels
  • 8 Inch Wheels
  • 12 Inch Wheels
  • 8-1/2 Inch Wide
  • 23-3/4 Inch Long
  • Steel
  • For Single-Axle Trailers
  • Gray
  • CE Smith

Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - 15" to 16" Wheels - Qty 2

Our Price: $299.11
In Stock
Give your trailer a classic look and reliable protection. This rounded teardrop fender shields both tires on one side, keeping rocks, water, and road grime away from your cargo.
  • Trailer Fenders
  • No Step
  • 16 Inch Wheels
  • 15 Inch Wheels
  • 10 Inch Wide
  • 72 Inch Long
  • Steel
  • For Tandem-Axle Trailers
  • Gray
  • CE Smith

Spring Seat for Typical 3,500-lb, 2" Square Trailer Axles - Galvanized Steel

Our Price: $4.17
In Stock
Stop worrying about rusted trailer parts after trips to the boat ramp or long days in the rain. This galvanized spring seat welds to your 2" square axle and fits 1-3/4" or 2" springs, fighting off rust for seasons to come.
  • Trailer Suspension Parts
  • Spring Seats
  • Utility Trailer
  • Camper
  • Car Hauler
  • 3500 lbs
  • Square Axle - 2 Inch
  • CE Smith

CE Smith Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - Galvanized

Our Price: $18.42
In Stock
7-3/4" Long curved equalizer connects double-eye springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Galvanized, so it's perfect for your boat trailer!
  • Trailer Suspension Parts
  • Standard Equalizer
  • Car Hauler
  • Camper
  • Snowmobile Trailer
  • Boat Trailer
  • Utility Trailer
  • Double Eye Springs
  • 7-3/4 Inch Long
  • Triple Axle
  • Tandem Axle
  • CE Smith

CE Smith Frame Straps - 3-1/2" Hole to Hole Length - Galvanized Steel - Qty 1

Our Price: $2.31
In Stock
Your trailer's been through it all: salt spray, washboard roads, shifting hardware. These frame straps step in as quiet fixers, backing your U-bolts and keeping your setup steady from driveway to dock and every stop in between.
  • Boat Trailer Parts
  • Frame Straps
  • 1 Inch Wide
  • 5 Inch Long
  • CE Smith

Front Hanger for 1-7/8" Wide Slipper Springs - 2-3/8" Tall - 9/16" Bolt Hole

Retail: $4.36
Our Price: $4.00
In Stock
Keep your trailer steady on the road. This front hanger attaches to your trailer's frame and holds a 1-3/8" wide slipper spring in place, so your suspension can absorb bumps and keep your cargo riding smooth.
  • Trailer Suspension Parts
  • Hangers
  • Camper
  • Snowmobile Trailer
  • Boat Trailer
  • Car Hauler
  • Utility Trailer
  • Slipper Springs - 1-3/4 Inch
  • 2-3/8 Inch Tall
  • CE Smith

CE Smith 12" Long Keel Roller - Polyurethane - Fits 5/8" Shaft

Retail: $72.79
Our Price: $55.65
Give your boat a smooth, steady slide on and off your trailer. This 12" polyurethane keel roller cushions and guides your hull, fits a 5/8" shaft, and helps prevent scuffs and scrapes at the ramp.
  • Boat Trailer Parts
  • Rollers
  • Keel Roller
  • 12 Inch Long
  • Fits 5/8 Inch Shaft
  • CE Smith

CE Smith Single Axle Trailer Fender - 9" Wide x 28" Long x 11" Tall - Qty 1

Our Price: $45.32
In Stock
Tired of mud and rocks splattering your gear or hitting the car behind you? This single-axle fender keeps the mess off your trailer and cargo and gives your trailer a nice finished look.
  • Trailer Fenders
  • No Step
  • 14 Inch Wheels
  • 9 Inch Wide
  • 28 Inch Long
  • Steel
  • For Single-Axle Trailers
  • Gray
  • CE Smith

Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - 14" to 15" Wheels - Qty 2

Our Price: $403.59
In Stock
Give your trailer a classic look and reliable protection. This rounded teardrop fender shields both tires on one side, keeping rocks, water, and road grime away from your cargo.
  • Trailer Fenders
  • No Step
  • 15 Inch Wheels
  • 14 Inch Wheels
  • 9 Inch Wide
  • 72 Inch Long
  • Steel
  • For Tandem-Axle Trailers
  • Gray
  • CE Smith

Single Axle Trailer Fender - Diamond Plate Aluminum - 8" Wheels - Qty 1

Our Price: $21.43
In Stock
Give your trailer a rugged, no-nonsense upgrade. This diamond tread aluminum fender keeps rocks and road spray in check, looks sharp at the ramp or job site, and won't rust - so you can focus on the haul, not repairs.
  • Trailer Fenders
  • No Step
  • 8 Inch Wheels
  • 10 Inch Wide
  • 22 Inch Long
  • Aluminum
  • For Single-Axle Trailers
  • Diamond Plate
  • CE Smith

CE Smith Trailer Tongue Step Pad - Galvanized Steel - for 2x3" or 3x3" Trailer Frame

Our Price: $93.91
When you need to climb onto your trailer to load gear, strap down cargo, or check a connection, this galvanized steel step pad has a grippy surface to give you solid, steady footing.
  • Trailer Steps
  • Step Pad
  • 24 Inch Wide
  • 9 Inch Deep
  • Steel
  • CE Smith

CE Smith Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - Galvanized

Retail: $21.50
Our Price: $18.68
In Stock
6" Long triangular equalizer connects double-eye springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Designed primarily for RVs and mobile homes.
  • Trailer Suspension Parts
  • Standard Equalizer
  • Boat Trailer
  • Camper
  • Snowmobile Trailer
  • Car Hauler
  • Utility Trailer
  • Double Eye Springs
  • 6 Inch Long
  • Tandem Axle
  • Triple Axle
  • CE Smith

Spring Seat for Typical 3,500-lb Round Trailer Axles - Weld-On - Plain Steel

Our Price: $7.83
In Stock
If you're updating your trailer or swapping out old parts, this plain steel spring seat makes repairs or upgrades easy on a wide range of trailer setups. It welds to a 2-3/8" round axle and fits 1-3/4" or 2" springs.
  • Trailer Suspension Parts
  • Spring Seats
  • Camper
  • Car Hauler
  • Utility Trailer
  • 3500 lbs
  • Round Axle - 2-3/8 Inch
  • CE Smith

CE Smith Keel Roller - Self Centering - Polyurethane - 12" Wide - 5/8" Shaft

Our Price: $58.73
In Stock
When you're easing your boat back onto the trailer after a long day, this keel roller makes it simple. Grooves help center your boat, while the tough polyurethane cushions the hull and keeps your boat scratch-free trip after trip.
  • Boat Trailer Parts
  • Rollers
  • Keel Roller
  • 2-13/16 Inch Diameter
  • 11-3/8 Inch Long
  • Fits 5/8 Inch Shaft
  • CE Smith

CE Smith Roller Shaft for Boat Trailers - Zinc-Plated Steel - 11" x 5/8" - Qty 1

Our Price: $9.77
In Stock
You were ready to launch, but the roller locked up. This shaft steps in when rust, bends, or wear bring things to a stop. It restores the spin, the glide, and the confidence to get back on the water like nothing ever went wrong.
  • Boat Trailer Parts
  • Rollers
  • Roller Shafts
  • 5/8 Inch Diameter
  • 11 Inch Long
  • CE Smith

CE Smith Tapered Spindle Axle - Weld On - 1-3/8" to 1-1/16"

Our Price: $31.04
In Stock
Replacement CE Smith spindle welds onto your trailer axle.
  • Trailer Spindles
  • Standard Spindle
  • 1-3/8 Inch Diameter
  • CE Smith

Dexter Disc Brake Kit - 10" Zinc Rotor - 5 on 4-1/2 - 3.5K Ranger - Fits 1-3/8" Spindle

Our Price: $302.91
Replace worn DB-35 brakes with this complete Dexter disc brake kit for 3.5K axles. Includes 10" zinc rotors, bearings, seals, grease caps, and hardware for 1-3/8" straight spindles typically found on Ranger boats.
  • Trailer Brakes
  • Disc Brakes
  • Marine Grade
  • 5 on 4-1/2 Inch
  • Rotor
  • 3500 lbs Axle
  • 15 Inch Wheel
  • 14-1/2 Inch Wheel
  • 14 Inch Wheel
  • 13 Inch Wheel
  • Dexter

Dexter Bearing Kit for 7.2K - 8K Axles - Inner and Outer Bearings 02475/25580

Our Price: $91.68
In Stock
  • Trailer Bearings Races Seals Caps
  • Bearings
  • Standard Bearings
  • Bearing Kits
  • 2.25 Inch I.D.
  • Bearing 02675 and 25580
  • Race 25520 and 02420
  • 8000 lbs Axle
  • 7200 lbs Axle
  • Dexter

Dexter Grease Cap with 2.72" OD - Fits 12" x 2" 8-Bolt Hubs - Zinc-Plated - Qty 2

Our Price: $17.91
In Stock
Protect your trailers wheel bearings with these 2.72" OD grease caps. Zinc-plated steel resists corrosion, and the drive-in design installs easily. Designed for 12" x 2" Dexter 8-bolt hubs. Includes 2 caps.
  • Trailer Bearings Races Seals Caps
  • Caps
  • Standard Grease Cap
  • 2.72 Inch O.D.
  • 6000 lbs Axle
  • 5200 lbs Axle
  • 7000 lbs Axle
  • Dexter

Dexter Dual Hydraulic Jack System w/ Double Acting Pump - 12,000 lbs

Our Price: $2,446.28
In Stock
Smooth and powerful hydraulic jack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.
  • Trailer Jack
  • 5th Wheel Trailer
  • Gooseneck Trailer
  • Dump Trailer
  • Enclosed Trailer
  • Side-Mount Jacks
  • 10001 lbs or More
  • Hydraulic Jack
  • Weld-On
  • With Rectangle Foot
  • Dexter

Dexter U-Bolt Plate for 2-3/8" Round Axle - 2" Wide Springs - 9/16" Bolts

Our Price: $21.74
Replacement U-Bolt plate helps to secure one end of your 2-3/8" diameter trailer axle to a 2" wide leaf spring. Designed for use with 3,500-lb, heavy-duty Dexter axles. 3/16" Thick steel plate ensures strength.
  • Trailer Suspension Parts
  • U-Bolt Plates
  • Snowmobile Trailer
  • Boat Trailer
  • 3500 lbs
  • Round Axle - 2-3/8 Inch
  • Dexter

Trailer Hub and Drum Assembly for Dexter ABS Tow Assist - 7K Axle - 8 on 6-1/2 - Oil Bath - Qty 1

Our Price: $478.91
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.
  • Trailer Hubs and Drums
  • Hub with Drum
  • ABS
  • Oil Bath
  • 25580 / 14125A
  • Standard Grade
  • For 7000 lbs Axles
  • 8 on 6-1/2 Inch
  • 16 Inch Wheel
  • 17 Inch Wheel
  • 16-1/2 Inch Wheel
  • 17-1/2 Inch Wheel
  • Dexter