New Arrivals

Keep your Old Man Emu leaf springs in top condition with this custom-fit shackle kit. Zerk fittings simplify lubrication, reducing wear and noise. Designed for CS055R leaf springs, the kit includes two complete shackles.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• Shackles
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit bushing kit. Includes 4 bushings and 2 sleeves made of durable polyurethane and rubber to reduce squeaks and last longer. Each spring requires one kit, so order accordingly.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Mount your powerful LED light bar to a round bull bar or rack using this clamp kit. The kit integrates to the AR40's housing and features a security nut system to protect your investment. Installation hardware and security tool included.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Mounting Hardware
• Brackets
• Black Steel
• ARB

Confidently install your Old Man Emu leaf springs with this custom-fit replacement center bolt and nut. Each leaf spring requires 1 center bolt and nut.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• Bolts
• Old Man Emu

Protect your investment and add options to your light bar with these clip-on polycarbonate covers. Used on Slimline bars with spot or flood lights, this clear cover has minimal effect on lighting, while limiting impact damage. Sold as a pair.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Light Covers
• 9 Inch Long
• Clear
• ARB

Replace the clip liners on your Old Man Emu leaf spring to reduce friction and noise. These liners are custom-fit for your specific OME leaf spring so you know they will work perfectly. Includes 4 clip liners per package.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• Liners
• Old Man Emu

A worn upper strut bushing can cause clunking, vibration, and poor handling. This direct-fit replacement combines polyurethane and rubber to restore quiet performance and smooth suspension response as part of your OME system.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Bushings
• Old Man Emu

Lifting your rig can throw your axle off-center, especially in the rear. This extension bracket helps correct panhard rod angles - restoring axle alignment and handling when fitting an OME rod on a right-hand drive vehicle.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Brackets
• Extension Bracket
• Old Man Emu

Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.

• Accessories and Parts
• Vehicle Suspension
• Control Arms
• Bushings
• Old Man Emu

Replaces the mounting bracket for your ARB AR40 light bar. Proprietary mount integrates with AR40 Light Bar for installation on a flat surface.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Mounting Hardware
• Brackets
• ARB

Confidently install your Old Man Emu leaf springs with this custom-fit replacement center bolt and nut. Each leaf spring requires 1 center bolt and nut.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• Bolts
• Old Man Emu

When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Vehicle Suspension
• Air Bag Compressor Kit
• Valves
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from a single 8-switch panel. Control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.

• Accessories and Parts
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Vehicle Suspension
• Valves
• Air Chuck
• Bulldog Winch

Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.

• Accessories and Parts
• Electric Winch
• Wiring
• Extension
• Plugs
• Bulldog Winch

You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.

• Accessories and Parts
• Vehicle Suspension
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Air Compressor Parts
• Hoses
• Bulldog Winch

Repairs the latching mechanism in your BedSlide truck bed slide. Works with all BedSlides made between 2010 and 2013. Kit includes 2 lock pins, 2 springs, 2 hairpin clips, and instructions.

• Accessories and Parts
• Truck Bed Slide
• Latches
• BedSlide

Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 3/8" chains. 7,000-lb Load limit.

• Accessories and Parts
• Trailer Safety Chains
• Safety Chain Parts
• Quick Links
• Brophy

This hitch head assembly gives you 4" of extended shank to give you extra clearance for your tailgate, spare tire, and trailer accessories for easier hookup. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

This replacement base fits your B&W Companion fifth-wheel trailer hitch. Adjustable arms have polyurethane bushings for hitch head (sold separately) to ride on, resulting in less rattle and noise.

• Accessories and Parts
• 5th Wheel Hitch
• Base
• B and W

This hitch head has a 4" extended drop to ensure a level, stable tow for your lifted truck or low-riding trailer. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W