New Arrivals

Retractable tonneau for your vehicle has aluminum slats and a vinyl top layer that combine the strength and security of a hard cover and seamless look of a soft cover. It locks at any point along the rails, and it retracts easily with a handle.

• Tonneau Cover
• Retractable - Manual
• Not Rack Compatible
• Opens at Tailgate
• Built-In Lock
• Aluminum and Vinyl
• Matte
• Pace Edwards

Remote-controlled, retractable tonneau cover opens and closes in under 30 seconds. Cover locks at any point along rails, and it fits over most fifth-wheel hitches. Powder coated aluminum panels with silicon hinges provide superior water resistance.

• Tonneau Cover
• Retractable - Powered
• Not Rack Compatible
• Opens at Tailgate
• Built-In Lock
• Aluminum
• Vinyl Grain
• Pace Edwards

Retractable tonneau cover with T-slot rails lets you add a light-duty ladder rack or roof rack to your vehicle. Aluminum and vinyl construction has strength of a hard cover and seamless look of a soft cover. Enhanced cargo protection keeps bed dry.

• Tonneau Cover
• Retractable - Manual
• Rack Compatible
• Opens at Tailgate
• Built-In Lock
• Aluminum and Vinyl
• Matte
• Pace Edwards

Remote-controlled, retractable tonneau cover opens and closes in under 30 seconds. Cover locks at any point along rails, and it fits over most fifth-wheel hitches. Powder coated aluminum panels with silicon hinges provide superior water resistance.

• Tonneau Cover
• Retractable - Powered
• Not Rack Compatible
• Opens at Tailgate
• Built-In Lock
• Aluminum
• Matte
• Pace Edwards

Retractable tonneau for your vehicle has aluminum slats and a vinyl top layer that combine the strength and security of a hard cover and seamless look of a soft cover. It locks at any point along the rails, and it retracts easily with a handle.

• Tonneau Cover
• Retractable - Manual
• Not Rack Compatible
• Opens at Tailgate
• Built-In Lock
• Aluminum and Vinyl
• Matte
• Pace Edwards

You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can completely remove it just as quickly for full bed access. Aluminum and vinyl deck has strength of a hard cover and seamless look of a soft cover.

• Tonneau Cover
• Retractable - Manual
• Not Rack Compatible
• Opens at Tailgate
• Tailgate Lock
• Aluminum and Vinyl
• Vinyl Grain
• Pace Edwards

Retractable hard tonneau cover protects your cargo and truck bed. Heavy-duty aluminum panels and silicone hinges help seal bed. Cover locks at 12" increments along the rails, and retracts easily with a quick-release handle.

• Tonneau Cover
• Retractable - Manual
• Rack Compatible
• Opens at Tailgate
• Built-In Lock
• Aluminum
• Vinyl Grain
• Pace Edwards

You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can remove it just as quickly for full bed access. Heavy-gauge aluminum panels with silicone hinges help protect your cargo from the elements.

• Tonneau Cover
• Retractable - Manual
• Not Rack Compatible
• Opens at Tailgate
• Tailgate Lock
• Aluminum
• Vinyl Grain
• Pace Edwards

Retractable tonneau cover with T-slot rails lets you add a light-duty ladder rack or roof rack to your vehicle. Heavy-duty aluminum panels and silicon hinges help seal the bed. Multiple weather seals and drain tubes offer enhanced cargo protection.

• Tonneau Cover
• Retractable - Manual
• Rack Compatible
• Opens at Tailgate
• Built-In Lock
• Aluminum
• Matte
• Pace Edwards

This strap hinge is made to support your large and heavy trailer door, storage compartment, window, gate, and more. It's made of a polished stainless steel, so it looks good as well as being rust-resistant.

• Trailer Door Hinges
• Trailer Door Parts
• Strap Hinge
• Non-Removable Pin
• Greaseable Pin
• Stainless Steel
• 4-3/4 Inch Long
• 2-1/8 Inch Wide
• Bolt-On - Pre-Drilled Holes
• Marlboro

This bullet hinge is perfect for metal gates and doors, welding on easily and able to support heavy loads. It's made of stainless steel to resist corrosion, and the bushing keeps the hinge working smoothly.

• Trailer Door Parts
• Trailer Door Hinges
• Barrel Hinge
• Greaseable Pin
• Removable Pin
• Stainless Steel
• 2-3/8 Inch Long
• Weld-On
• Marlboro

This butt hinge is made for your trailer door, storage compartment, window, gate, the lid on your tool box, and more. With a non-removable pin, the hinge is solid and secure.

• RV Door Parts
• Trailer Door Hinges
• RV Cabinet and Drawer Hardware
• Trailer Door Parts
• Butt Hinge
• Non-Removable Pin
• Steel
• 4 Inch Long
• 4 Inch Wide
• Weld-On
• Bolt-On - No Pre-Drilled Holes
• Marlboro

This strap hinge is made to support your large and heavy trailer door, storage compartment, window, gate, and more. It's made of a polished stainless steel, so it looks good as well as being rust-resistant. Installs on left side of door.

• Trailer Door Hinges
• Trailer Door Parts
• Strap Hinge
• Non-Removable Pin
• Greaseable Pin
• Stainless Steel
• 4-3/4 Inch Long
• 2-1/8 Inch Wide
• Bolt-On - Pre-Drilled Holes
• Marlboro

This butt hinge is made for your trailer door, storage compartment, window, gate, the lid on your tool box, and more. With a non-removable pin, the hinge is solid and secure.

• Trailer Door Parts
• RV Cabinet and Drawer Hardware
• RV Door Parts
• Trailer Door Hinges
• Butt Hinge
• Non-Removable Pin
• Steel
• 3 Inch Long
• 3 Inch Wide
• Bolt-On - No Pre-Drilled Holes
• Weld-On
• Marlboro

This bullet hinge is perfect for metal gates and doors, welding on easily and able to support heavy loads. It's made of stainless steel to resist corrosion, and the bushing keeps the hinge working smoothly.

• Trailer Door Hinges
• Trailer Door Parts
• Barrel Hinge
• Removable Pin
• Greaseable Pin
• Stainless Steel
• 3-7/8 Inch Long
• Weld-On
• Marlboro

Replaces the lid assembly for your MaxxFan Plus roof vent on your RV.

• RV Vents and Fans
• Replacement Lid
• Roof Vent
• White
• MAXXAIR

This butt hinge is made for your trailer door, storage compartment, window, gate, the lid on your tool box, and more. With a non-removable pin, the hinge is solid and secure. Made of rustproof aluminum.

• Trailer Door Parts
• RV Cabinet and Drawer Hardware
• Trailer Door Hinges
• RV Door Parts
• Butt Hinge
• Non-Removable Pin
• Aluminum
• 3 Inch Long
• 2 Inch Wide
• Weld-On
• Bolt-On - No Pre-Drilled Holes
• Marlboro

This bullet hinge is perfect for metal gates and doors, welding on easily and able to support heavy loads. It's made of stainless steel to resist corrosion, and the bushing keeps the hinge working smoothly.

• Trailer Door Hinges
• Trailer Door Parts
• Barrel Hinge
• Removable Pin
• Greaseable Pin
• Stainless Steel
• 2-3/4 Inch Long
• Weld-On
• Marlboro

This butt hinge is made for your trailer door, storage compartment, window, gate, the lid on your tool box, and more. The pin is removable, so you can take apart the hinge without having to uninstall it completely.

• Trailer Door Parts
• Trailer Door Hinges
• RV Cabinet and Drawer Hardware
• RV Door Parts
• Butt Hinge
• Removable Pin
• Steel
• 3 Inch Long
• 3 Inch Wide
• Bolt-On - No Pre-Drilled Holes
• Weld-On
• Marlboro

This strap hinge is made to support your large and heavy trailer door, storage compartment, window, gate, and more. It's made of a polished stainless steel, so it looks good as well as being rust-resistant. Installs on the right side of door.

• Trailer Door Hinges
• Trailer Door Parts
• Strap Hinge
• Greaseable Pin
• Non-Removable Pin
• Stainless Steel
• 4-3/4 Inch Long
• 2-1/8 Inch Wide
• Bolt-On - Pre-Drilled Holes
• Marlboro

You paddle in the morning and ride in the afternoon. With room for two boats and two bikes, this off-road trailer is built for big weekends, long road trips, and adventurers who never pick just one path.

• Trailers
• Sports Trailer
• J-Style
• 20 Feet Long
• 800 lbs
• Spare Tire Included
• Galvanized Steel
• Malone

You've got 6 bikes, a full crew, and one goal: ride more, wrangle less. This trailer makes group rides easy by letting you load e-bikes low, lock in every frame, and get to the trail without shuffling vehicles or removing wheels.

• Trailers
• Sports Trailer
• Crossbar-Style
• 800 lbs
• Galvanized Steel
• Malone

Wrestling a fishing kayak into a truck bed? Skip the struggle. This full kit gives you support from tailgate to cab. Roll it in, cradle it right, and secure it like a pro. Built for long boats, short beds, or anyone tired of J-style rack shenanigans.

• Watersport Carriers
• Ladder Racks
• Kayak
• Roof Mount Carrier
• Saddle-Style
• Fixed
• Ladder Rack
• Track Mount
• No Load Assist
• Malone

You've scraped your roof one too many times. With this submersible lowbed trailer, you just back up, load at waist height, and launch without breaking your back or your gear.

• Trailers
• Kayak Trailer
• Bunk Boards
• 2 Kayaks
• 20 Feet Long
• 800 lbs
• Spare Tire Included
• 78 Inch Crossbar
• 1-Tier
• Malone