New Arrivals
Replacement Pin for Solera RV Awnings
In Stock
Replaces the 3/8" x 2-1/8" pin for your Lippert Solera RV awning. Dacromet finish provides corrosion resistance.
- Accessories and Parts
- RV Awnings
- Hardware
- Pins
- Lippert
Replacement Switch Bezel for Power Gear Leveling System - Black/Silver
Replace a cracked or faded switch bezel on your Power Gear leveling system with this black/silver trim piece. Snaps in easily for a quick cosmetic fix. Works on select Power Gear RV leveling system control panels.
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Controllers
- Control Panel
- Bezel
- Lippert
Replacement Roller and Fabric Kit for 8' Edge and 2000 Series RV Awnings - LED - Black Fade
Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Edge and 2000 series 8' power awnings with a built-in LED strip. Installs more easily than replacing just the fabric.
- Accessories and Parts
- RV Awnings
- Fabric
- 8 Feet Wide
- Extends 7 Feet
- Black Fade
- Lippert
Solera Regal Electric RV Awning Hardware Kit - 12 V - 69" Arms - Black
In Stock
Restore push-button power to your Solera awning with this replacement arm kit featuring matching 69 inch Regal arms, flat-back mounts, top-routed wiring, and a black 12-volt rocker switch - just swap the arms and keep your current fabric and roller.
- Accessories and Parts
- RV Awnings
- Arms
- 69 Inch Long
- Pitch Arms
- Flat Awnings
- Black
- Lippert
Replacement Auto Leveling Control Box for Lippert Power Gear Hydraulic RV Leveling System
Replaces the auto-leveling control box for your Lippert Power Gear hydraulic RV leveling system.
- Accessories and Parts
- Trailer Jack
- Control Panel
- Lippert
Replacement 3-Position Wiring Harness for Lippert Level-Up Hydraulic Leveling System - 25'
A damaged harness can make your RV's leveling system unreliable. This 25' replacement restores electrical connections, helping your jacks work smoothly. Designed for Lippert Level-Up systems, it's a simple fix to get you back to camping.
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Wiring Harness
- Lippert
Replacement Idler Side Hardware Kit for Solera Edge RV Slide-Out Awning - Black
Restore your Solera Edge slide-out awning with this full idler side replacement kit. Designed for all Solera Edge toppers, it includes black-finished hardware and wire support components for a secure, like-new installation.
- Accessories and Parts
- RV Awning
- Hardware
- Lippert
Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - 47 Series - 30" Wide
Replaces the electric steps, motor, and control unit for your Kwikee 47 Series RV step. Motor and control unit automatically extend and retract the steps when you open and close the door. Wiring pigtail hardwires to your RV's power.
- Accessories and Parts
- RV Steps
- Motors
- Control Module
- Steps
- Lippert
Solera 2000 Series and Edge RV Awning Hardware - Bottom Wire
This kit includes the hardware for your Solera 2000 Series or Edge awning. The needed awning roller tubes and fabrics are sold separately. The 58" long arms offer sliding adjustable pitch. The wire is located at the bottom.
- Accessories and Parts
- RV Awnings
- Arms
- Pitch Arms
- Lippert
Replacement Front Cover for Lippert Edge RV Awnings - Drive Head - White
Replaces the front cover of the drive head on your Lippert Edge RV awning.
- Accessories and Parts
- RV Awnings
- Head Parts
- Head Cover
- Drive Head
- White
- Lippert
Electric Trailer Brake Assembly for Lippert ABS Hubs - 10" - Right Hand - 3,500 lbs
In Stock
Passenger's-side electric trailer brake measures 10" x 2-1/4" and is made for Lippert ABS systems. Brake pads are made of friction material for improved braking and longevity. Fits 13" to 15" wheels.
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- 10 x 2-1/4 Inch Drum
- Lippert
Replacement Seals for LaSalle Bristol RV Waste Valve - 3" - Qty 2
In Stock
Replaces the rubber gaskets on your LaSalle Bristol black-water waste valve. Prevents sewer water from slowly leaking out of the valve. Includes two seals for both sides of the valve.
- Accessories and Parts
- RV Waste Valves
- Waste Valve Parts
- Seals
- LaSalle Bristol
LaSalle Bristol Sink Drain Pipe for Dual Basin RV Sinks - 1-1/2"
In Stock
Pipe assembly connects both drains in your dual-basin sink to a single 1-1/2" pipe. Seals included. Made of ABS plastic. Measures 11" center to center.
- Accessories and Parts
- Rv Sinks
- Drain Connector
- LaSalle Bristol
Replacement LaSalle Bristol Motodrain Motor and Hardware - For 3" and 1-1/2" Valves
Repair the worn out motor and mounting brackets for your Motodrain waste valve.
- Accessories and Parts
- RV Waste Valves
- Motor
- LaSalle Bristol
1/2" Cone Washer for RV PEX Water Line Fittings
This 1/2" cone washer creates a watertight seal in your RV's PEX plumbing system. Seats snugly in faucet or toilet fittings to stop leaks and keep your fresh water lines drip-free.
- Accessories and Parts
- RV Faucets
- RV Fresh Water
- RV Toilets
- Hardware
- Washers
- LaSalle Bristol
Replacement stopper for LaSalle Bristol Pop Up Drain for RV Bathroom Sinks
In Stock
Replaces the stopper in a LaSalle Bristol drains for bathroom sinks. Includes ring seal so you can fill your sink with water without it slowly draining out.
- Accessories and Parts
- RV Sinks
- Sink Stopper
- White
- LaSalle Bristol
Electric Trailer Brake Assembly for Lippert ABS Hubs - 10" - Left Hand - 3,500 lbs
In Stock
Driver's-side electric trailer brake measures 10" x 2-1/4" and is made for Lippert ABS systems. Brake pads are made of friction material for improved braking and longevity. Fits 13" to 15" wheels.
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- 10 x 2-1/4 Inch Drum
- Lippert
Replacement Drive Side Hardware Kit for Solera Edge 58" RV Slide-Out Awning - Black
Refresh the drive side of your Solera Edge 58" long RV slide topper with this full hardware kit. Compatible with all Solera Edge models, it includes wire support, switch kit, and rivet in a sleek black finish for lasting performance.
- Accessories and Parts
- RV Awning
- Hardware
- Lippert
Replacement Hydraulic Pump for Lippert Leveling Systems - 1.2 Gal - 4 Bank - Pre-Wired
Repair your Lippert leveling system with this replacement hydraulic pump. The 1.2-gal reservoir keeps fluid flowing, while the 4-bank manifold distributes pressure. Pre-wired for easy installation, so you can get back to smooth, reliable leveling.
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Hydraulic Parts
- Pumps
- Lippert
Replacement 600 mm Prop Rod Assembly for Leer Tri-Fold Tonneau Covers
Replaces the prop rod assembly on your Leer tri-fold tonneau cover (631304, 631130, 631137, 631288 and 631336).
- Accessories and Parts
- Tonneau Cover
- Prop Rods
- Leer Tri-Fold
- Leer
Replacement Snap-On Ball Socket End for Leer Tonneau Covers
Replaces the snap-on ball socket end for your Leer tonneau cover's prop rod. Connects your prop rod to the ball stud on your tonneau cover.
- Accessories and Parts
- Tonneau Cover
- Prop Rods
- Leer Tri-Fold
- Leer Quad-Fold
- Leer
Replacement Quick Release End for Leer Tonneau Covers
In Stock
Replaces the quick release ball socket end for your Leer tonneau cover's prop rod. Connects your prop rod to the ball stud on your tonneau cover.
- Accessories and Parts
- Tonneau Cover
- Prop Rods
- Leer Quad-Fold
- Leer Tri-Fold
- Leer
Replacement Prop Rod for Leer Hard Quad-Fold Tonneau Covers - Qty 1
In Stock
Replaces a prop rod for your Leer hard quad-fold tonneau cover (650120 or 650300).
- Accessories and Parts
- Tonneau Cover
- Prop Rods
- Leer Quad-Fold
- Leer
Replacement 470 mm Prop Rod Assembly for Leer Tri-Fold Tonneau Covers
In Stock
Replaces the prop rod assembly on your Leer tri-fold tonneau cover (631303, 631105, 631286, and 631335) or quad-fold tonneau cover (650400, 650149, and 650320).
- Accessories and Parts
- Tonneau Cover
- Prop Rods
- Leer Tri-Fold
- Leer