New Parts Accessories Product Arrivals

This SAE to alligator clamps cable connects your 12V battery to your SAE power cable. Works with any 12V accessory that has a SAE connector on its power cord.

• Accessories and Parts
• Tire Inflator
• Adapters
• Clamps
• Air Lift

This electric heat strip works with your R32 compatible AC unit (sold separately) to remove the chill from your RV or camper on cold or frosty mornings. Power cord and mounting hardware are included for easy, plug-and-play installation.

• Accessories and Parts
• RV Air Conditioners
• Heat Strip
• Advent Air

Coming soon - available February 2025. You'll need this air distribution box if you're upgrading your RV's AC to a 2025 ductless system with the new R32 refrigerant. The new ACs will not work with any systems from 2024 and earlier.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Advent Air

You'll need this air distribution box if you're upgrading your RV's AC to a 2025 ducted or ductless system with the new R32 refrigerant. New ACs will not work with any systems from 2024 or earlier.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Advent Air

Replaces the dust caps for your Blue Ox locks. Includes 5 dust caps.

• Accessories and Parts
• Trailer Hitch Lock
• Lock Cover
• Blue Ox

Shank measures 9" long. 9 Bolt holes let you adjust the height of your Blue Ox SwayPro weight distribution system. Fits 3" receivers.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1900 lbs TW
• Fits 3 Inch Hitch
• Blue Ox

Replacement head assembly works with Blue Ox standard SwayPro weight distribution systems. Includes replacement hardware.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Blue Ox

Replacement head assembly works with Blue Ox standard TrackPro weight distribution systems. Includes replacement hardware.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Blue Ox

Replace the brake claw on your Blue Ox Patriot supplemental braking system (BRK2022).

• Accessories and Parts
• Flat Tow Brake System
• Pedal Clamp
• Claws
• Blue Ox

When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Vehicle Suspension
• Air Bag Compressor Kit
• Valves
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from a single 8-switch panel. Control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.

• Accessories and Parts
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Vehicle Suspension
• Valves
• Air Chuck
• Bulldog Winch

Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.

• Accessories and Parts
• Electric Winch
• Wiring
• Extension
• Plugs
• Bulldog Winch

You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.

• Accessories and Parts
• Vehicle Suspension
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Air Compressor Parts
• Hoses
• Bulldog Winch

Repairs the latching mechanism in your BedSlide truck bed slide. Works with all BedSlides made between 2010 and 2013. Kit includes 2 lock pins, 2 springs, 2 hairpin clips, and instructions.

• Accessories and Parts
• Truck Bed Slide
• Latches
• BedSlide

Shank measures 12" long from center of hitch pin hole to the center of the adjustment holes. 7 Bolt holes let you adjust the height of your Blue Ox TrackPro weight distribution system. Fits 2" receivers.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1400 lbs TW
• Fits 2 Inch Hitch
• Blue Ox

Shank measures 9" long from center of hitch pin hole to the center of the adjustment holes. 9 Bolt holes let you adjust the height of your Blue Ox TrackPro weight distribution system. Fits 3" receivers.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1900 lbs TW
• Fits 3 Inch Hitch
• Blue Ox

Attach these keepers to the S-hooks on your 7,500 lb safety cables to help keep them connected to their mounting points. Textured tips let you easily push the keepers into position. Durable polypropylene won't fade or corrode.

• Accessories and Parts
• Trailer Safety Chains
• Safety Cables
• Tow Bar
• Safety Cable Parts
• Safety Chain Parts
• Keepers
• Blue Ox

You lost your rear factory camera when you removed the tailgate, but you don't have to give up safety. This camera mounts on your license plate and plugs into your truck's harness to bring that view back to your screen when you back up.

• Accessories and Parts
• Backup Camera
• Camera
• Wiring
• Tailgate Handle Camera
• Wiring Harness
• Brandmotion

Replaces the spacer bracket for installing diverter control handles on your B&B RV Nautilus P3 or P4 panel. Spans the distance from the valve to the back of the panel for added support and smooth operation.

• Accessories and Parts
• Smart RV
• Handles
• B and B Molders

Replaces the monitor for your Brandmotion Wireless HD Oberservation System.

• Accessories and Parts
• Backup Camera
• Monitors
• Dash Monitor
• Brandmotion