New Boating Product Arrivals

When you're easing your boat back onto the trailer after a long day, this keel roller makes it simple. Grooves help center your boat, while the tough polyurethane cushions the hull and keeps your boat scratch-free trip after trip.

• Boat Trailer Parts
• Rollers
• Keel Roller
• 2-13/16 Inch Diameter
• 11-3/8 Inch Long
• Fits 5/8 Inch Shaft
• CE Smith

You were ready to launch, but the roller locked up. This shaft steps in when rust, bends, or wear bring things to a stop. It restores the spin, the glide, and the confidence to get back on the water like nothing ever went wrong.

• Boat Trailer Parts
• Rollers
• Roller Shafts
• 5/8 Inch Diameter
• 11 Inch Long
• CE Smith

Give your boat a smooth, steady slide on and off your trailer. This 18" polyurethane keel roller cushions and guides your hull, fits a 5/8" shaft, and helps prevent scuffs and scrapes at the ramp.

• Boat Trailer Parts
• Rollers
• Keel Roller
• 18 Inch Long
• Fits 5/8 Inch Shaft
• CE Smith

The launch was tricky, but getting back on the trailer is worse. The keel won't center and you're tired from a day on the water. This bracket fixes the angle, steadies the roller, and helps guide your boat home without the struggle.

• Boat Trailer Parts
• Rollers
• Roller Bracket
• CE Smith

Give your boat a gentle landing every time you load up. This 3" polyurethane bow roller cushions the front of your boat, absorbs bumps on the road, and helps keep your bow protected, trip after trip.

• Boat Trailer Parts
• Rollers
• Bow Roller
• 3 Inch Diameter
• 3 Inch Long
• Fits 1/2 Inch Shaft
• CE Smith

Create a sturdy tie-down spot wherever you need it on your boat trailer. This aluminum bracket bolts to your trailer's frame, wall, or floor so you can secure your coolers or gear to prevent shifting during travel.

• Boat Trailer Parts
• Tie-Down Anchors
• Tie-Down Anchor Brackets
• 3/8 Inch Tall
• 3 Inch Wide
• 5-1/4 Inch Long
• CE Smith

If you've ever winched a deep-hull boat onto your trailer and worried about scraping or shifting, this V-shaped keel roller is here to help. It cushions your hull, absorbs bumps, and keeps loading and unloading smooth.

• Boat Trailer Parts
• Rollers
• Keel Roller
• 5-1/4 Inch Diameter
• 6-1/2 Inch Long
• Fits 1/2 Inch Shaft
• CE Smith

Your trailer's been through it all: salt spray, washboard roads, shifting hardware. These frame straps step in as quiet fixers, backing your U-bolts and keeping your setup steady from driveway to dock and every stop in between.

• Boat Trailer Parts
• Frame Straps
• 1-1/4 Inch Wide
• 3-3/4 Inch Long
• CE Smith

Loading your fishing or jon boat at a busy ramp can be tricky, but this side guide roller helps every time. Mounted along your trailer, it gently centers your boat for smooth loading, so you can skip the struggle and get off the water faster.

• Boat Trailer Parts
• Rollers
• Side Guide Roller
• 2-1/2 Inch Diameter
• 12 Inch Long
• Fits 1/2 Inch Shaft
• CE Smith

Your trailer's been through it all: salt spray, washboard roads, shifting hardware. These frame straps step in as quiet fixers, backing your U-bolts and keeping your setup steady from driveway to dock and every stop in between.

• Boat Trailer Parts
• Frame Straps
• 1 Inch Wide
• 4 Inch Long
• CE Smith

Your trailer's been through it all: salt spray, washboard roads, shifting hardware. These frame straps step in as quiet fixers, backing your U-bolts and keeping your setup steady from driveway to dock and every stop in between.

• Boat Trailer Parts
• Frame Straps
• 1 Inch Wide
• 5 Inch Long
• CE Smith

Give your boat a smooth, steady slide on and off your trailer. This 12" polyurethane keel roller cushions and guides your hull, fits a 5/8" shaft, and helps prevent scuffs and scrapes at the ramp.

• Boat Trailer Parts
• Rollers
• Keel Roller
• 12 Inch Long
• Fits 5/8 Inch Shaft
• CE Smith

Working on multiple trailers? This wrap cuts drag at the ramp so your boats glide on and off with less effort. And with 250' to work with, you'll have plenty of wrap for large-scale projects or for stocking your boat supply store.

• Boat Trailer Parts
• Bunks
• Trailer Bunk Carpet
• 6 Inch Wide
• 3000 Inch Long
• Caliber

Keep your boat looking sharp and loading smooth with this PVC bow roller. It installs fast, holds up well, and keeps your boat centered. And because it's non-marking, you'll spend less time scrubbing your hull and more time on the water.

• Boat Trailer Parts
• Rollers
• Spool Roller
• 2-3/4 Inch Diameter
• 3 Inch Long
• Fits 1/2 Inch Shaft
• Caliber

Tired of fighting with sticky bunks? Skip the carpet replacement with these marine slides from Caliber. They just screw over your carpet to help your boat glide off and onto the trailer with less strain, but let you keep the traditional look.

• Boat Trailer Parts
• Bunks
• Slides
• 1-1/2 Inch Wide
• 15 Inch Long
• Caliber

Give your trailer bunks a clean, finished look with this 4-pack of endcaps. Perfect for single-trailer installs or replacements. Designed for 2x6 boards and pairs with Caliber bunk wrap. Hardware not included.

• Boat Trailer Parts
• Bunks
• End Cap
• 2 Inch Tall
• 6 Inch Wide
• Caliber

Keep your boat looking sharp and loading smooth with this PVC bow roller. It installs fast, holds up well, and keeps your boat centered. And because it's non-marking, you'll spend less time scrubbing your hull and more time on the water.

• Boat Trailer Parts
• Rollers
• Bow Roller
• 4-1/2 Inch Diameter
• 4-1/2 Inch Long
• Fits 1/2 Inch Shaft
• Caliber

A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.

• Boat Trailer Parts
• Bunks
• Trailer Bunk Carpet
• 4 Inch Wide
• 288 Inch Long
• Caliber

Buying wrap by the roll? These 2x4 endcaps finish off your bunks with a clean look. Includes 24 black caps - great for trailer pros and marine shops handling multiple projects. Hardware not included.

• Boat Trailer Parts
• Bunks
• End Cap
• 2 Inch Tall
• 4 Inch Wide
• Caliber

A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.

• Boat Trailer Parts
• Bunks
• Trailer Bunk Carpet
• 4 Inch Wide
• 192 Inch Long
• Caliber

Keep your boat looking sharp and loading smooth with this PVC bow roller. It installs fast, holds up well, and keeps your boat centered. And because it's non-marking, you'll spend less time scrubbing your hull and more time on the water.

• Boat Trailer Parts
• Rollers
• Bow Roller
• 4-1/2 Inch Diameter
• 5-7/8 Inch Long
• Fits 1/2 Inch Shaft
• Caliber

A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.

• Boat Trailer Parts
• Bunks
• Trailer Bunk Carpet
• 6 Inch Wide
• 288 Inch Long
• Caliber

Buying wrap by the roll? These 2x6 endcaps finish off your bunks with a clean look. Includes 24 black caps - great for trailer pros and marine shops handling multiple projects. Hardware not included.

• Boat Trailer Parts
• Bunks
• End Cap
• 2 Inch Tall
• 6 Inch Wide
• Caliber

Tired of fighting with sticky bunks? Skip the carpet replacement with these marine slides from Caliber. They just screw over your carpet to help your boat glide off and onto the trailer with less strain, but let you keep the traditional look.

• Boat Trailer Parts
• Bunks
• Slides
• 3 Inch Wide
• 15 Inch Long
• Caliber