bing tracking image

Agri-Cover SnowSport HD Utility Snowplow for 2" Hitches - 84" Wide Blade
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Part Numbers: SS48GV,31084

Retail:$2,083.95
Our Price: $1,989.45
You Save: $94.50
Snow Plow
This item qualifies for Free Shipping

In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me



Agri-Cover SnowSport HD Utility Snowplow for 2" Hitches - 84" Wide Blade
part number: SS48GV

84 x 18 Heavy-duty plow with thick rubber cutting edge self-adjusts up and down to smoothly clear a path over concrete, gravel, and grass. Side scoops catch more snow with each push. Aluminum blade can be manually angled to either side.

Features:

  • Heavy-duty, user-friendly plow allows for quick and easy snowplowing with no controls or hydraulics
  • Adjustable, 3-position blade allows you to manually change plowing angles
    • Blade can be positioned straight ahead, to the right or to the left
  • Side scoops keep snow from spilling out, increasing capacity
  • Self-adjusting plow frame allows up and down movement over rough terrain
    • Safe for use on grass, concrete, gravel, brick and other uneven surfaces
  • Practical design does not block headlights in either plow or transport position
  • Effortless installation on the front or back of your vehicle
    • Designed for use on 2" front or rear trailer hitches (sold separately)
  • Durable construction
    • Rust-resistant aluminum blade
    • Long-lasting, heavy-duty rubber cutting edge
  • Complete kit includes plow blade with blade markers, 3-position shank assembly, push frame, and hardware
  • Made in the USA


Specs:

  • Application: SUVs, trucks and minivans with a 2" front- or rear-mount hitch receiver
    • Must have 8" to 14" clearance under the receiver
  • Overall blade dimensions: 96" wide x 18" tall x 3" thick
  • Rubber cutting edge dimensions: 6" tall x 1" thick
  • Blade weight: approximately 129 lbs
  • Plow mounting frame: 31" wide
  • Warranty:
    • 1-Year for plow parts
    • 3-Year for rubber cutting edge


Snowplow Installation

Push Frame

Installation is quick and simple - just slide included shank assembly into your 2" receiver and secure with pin.





Snap Pins

Then lift the blade, one end at a time, onto the frame's holders and fasten with snap pins.





Plow blade showing 3-point directions

The SnowSport HD blade is mounted on an angled, 3-position shank assembly, allowing you to plow to the left, to the right or straight ahead.



How to Plow

Plow

To plow, lower the blade and begin driving; no wiring or hydraulics are needed. The unique push frame on the shank assembly allows the blade to move along the grade of the terrain for easier, more efficient plowing. The heavy-duty rubber cutting edge is effective yet turf friendly, collecting snow and squeegeeing slush without digging into the ground.


Reverse

When you reverse direction, the blade lies back, skimming over the surface of the ground so that you can easily take another pass.


Backing Up

Once you're finished plowing, just lift the blade and refasten into the travel position. The blade is secure enough to travel at highway speeds, and the low-profile design keeps it from blocking your vehicle's headlights. Removal for storage is quick and easy. The plow can be used on the rear of your vehicle, making it a cinch to back out of your snow-packed driveway.



80660 Agri-Cover SnowSport HD Snowplow for 2" Hitches - 84" Wide Blade

California residents: click here



Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31084

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

Features:

  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over steel resists corrosion
  • Sturdy, square-tube design
  • Assembled in USA


Specs:

  • Line pull: 9,000 lbs
  • Vertical load: 350 lbs
  • Gross trailer weight: 3,500 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



31084 Curt Front-Mount Trailer Hitch Receiver



Video of Agri-Cover SnowSport HD Utility Snowplow for 2" Hitches - 84" Wide Blade

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Agri-Cover SnowSport HD Utility Snowplow Manufacturer Demo

(upbeat rock music) (upbeat rock music continues) Narrator This video is to be used in conjunction with your owner's manual to help you with the assembly and mounting of your new SnowSport HD Plow. You will need a receiver plow mount hitch installed on your vehicle before starting the plow assembly. Follow the written instructions for the mount kit for your particular model of truck. Next, you will want to gather the tools shown on the list: torque wrench, impact or ratchet with 9/16-inch and 3/4-inch socket, drill with 3/16-inch and 5/16-inch drill bits, number 3 Philips driver bit, 3/4-inch box wrench, 5/16-inch open end wrench, 3/16-inch Allen wrench, bubble level, and protective eyewear. Make sure your vehicle is parked on a level grade and you're ready to get started. Step 1.

Insert interceptor into receiver and secure with the hitch pin. The interceptor can be installed with the big leg turned either up or down as needed for proper push frame clearance, shown turned up in this video. Bolt the push frame to the proper hole pattern on the interceptor using 4 half-inch by four-inch bolts with flat washers and lock nuts. Leave bolts snug tight for now. Step 2.

With the bolts snug tight, level the push frame horizontally, then check push frame for vertical plum. If plum, tighten all four bolts and proceed. If not plum, refer to the shimming procedure in step number 2 of your owner's manual. Step 3. Align the end of the rubber edge with the matching channel of the bottom section of the aluminum blade.

Slide the rubber edge into the channel until it's centered on the aluminum blade. Take the top half of the blade and connect the tongue-n-groove joint with the bottom half. Slide the top section until it's centered on the bottom section. Step 4. At each end of the blade, insert two square nuts into each channel, flat side facing out.

These nuts will be aligned with the holes at the top and bottom of the slide hinges. Place each slide hinge on the blade and align the edge of the hinge with a factory mark on the blade. When both hinges are properly aligned, they should measure 22 1/2 inches apart. Turn the 3/8-inch by 3/4-inch hex bolts with flat washers into the nuts that we're previously slid into the channels on both the top section of the blade and the bottom section of the blade. Double check to make sure each slide hinge is lined up with the factory mark. Then, tighten the hex bolts on the top section first, then tighten the hex bolts on the bottom section. Using a 5/16-inch bit, drill a hole through the blade in each factory punched hole on the slide hinge. Turn a 3/8-inch by 1-inch self-threading bolt into each drilled down hole and tighten. Step 5. At the tongue-n-groove joint, drill a 5/16-inch pilot hole at the factory mark in the v-groove at each end of the blade. For a 96-inch wide blade, there will be an extra hole drilled, and bolt installed per side. See step number 6 in your owner's manual. Turn a 3/8-inch by 1-inch self-threading bolt into each pilot hole and tighten. Using a torque wrench, tighten all six bolts in each slide hinge to 31 foot pounds. Step 6. At the bottom of the blade, double check that the rubber edge is centered. Then using a 3/16-inch bit, drill a pilot hole at each of the four factory marks in the v-groove. Be sure to only drill through the first layer of aluminum and into the rubber. Using a number 3 Philips bit, run a self-drilling screw into each of the four pilot holes. This prevents the rubber-cutting edge from moving. Step 7. Now, hang the blade on the push frame in the transport position and insert the keyhole pins. Insert two square nuts into the top channel. With a hex nut turned onto the stud of the blade marker, align the blade marker with the hole on the lift handle and bolt the marker and handle to the blade using one of the square nuts in the channel. Turn a 3/8-inch by 3/4-inch bolt into the other hole on the handle and thread it into the second nut that was slid into the channel. With the handle flushed with the blade edge, tighten both bolts connecting the lift handle to the blade. Repeat at the other end. Step 8. Attach the rubber box end to the blade using the metal cap plate and four 3/8-inch by 2 1/2-inch self-threading bolts. Tighten these bolts until the rubber end begins to compress to the blade. Insert a fifth bolt to tighten the bottom of the rubber end to the bottom of the metal cap plate. Secure this bolt with a flat washer and lock nut, tighten all bolts equally, and repeat at the other end. The installation of the plow is now complete, and your plow is ready for the winter season. (upbeat rock music).



Customer Reviews

Agri-Cover SnowSport HD Utility Snowplow for 2" Hitches - 84" Wide Blade - SS48GV

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31084

Average Customer Rating:  4.5 out of 5 stars   (49 Customer Reviews)

84 x 18 Heavy-duty plow with thick rubber cutting edge self-adjusts up and down to smoothly clear a path over concrete, gravel, and grass. Side scoops catch more snow with each push. Aluminum blade can be manually angled to either side. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

by: Richard 01/09/2024
1995 JeepCherokee

Just what I was looking for. Thank you.



by: Robin G.11/18/2014
2011 Honda Ridgeline

We installed this on our 2011 Honda Ridgeline and a week later it snowed... And snowed.... And snowed.. 5 feet in 24 hours ( we live on the lake near Buffalo) and it's still snowing... This wasn't good, it was AWESOME! It was an easy install and assembly and worked absolutely perfect! We have a tough driveway and this kept it clear with no issues, no problems and we used it all day and night! When you spend that much on something you've never even seen before you can have reservations... It's worth every penny. It's solid ( more than we thought it would be) and does the job with ease. No .. It's good, but...... It's exactly as advertised and etrailer not only had the best price, the communication with my order was exceptional. Now... If only the town could send a plow down my street.....



by: Rory12/14/2010
2015 Chevrolet Blazer

Snowsport PlowEtrailer.com does it right from start to finish. On top of having a great web site, the staff are the best.
Keeping in mind, I ordered this in December, about 5 days before our first big snow, here in Ohio. Within an hour of ordering my SnowSport HD plow, I was upgraded to special priority shipping, that was a nice surprise! The plow arrived in about two days, in three boxes, as I ordered the front hitch at the same time. I feel bad for my UPS carrier, these boxes were not for the faint of heart. The assembly went smoothly, the manufacturer uses high end parts and everything is well marked and the instructions are easy to follow. I estimate it took me two hours to get everything put together, with a coffee break in between. I am impressed with the construction, wow. Heavy duty is right!
We had four inches of snow yesterday. I opened the garage door and went to work, two pushes to clear the parking spots, and one easy push down the two hundred foot gravel driveway. Like butter.
I was done. It took less then 15 minutes. I put this blade on my 2003 rear wheel drive, not 4x4, Chevy Blazer. I backed into the garage and it looked like I had just put the blade on, this blade could last a long time. I love it. I cant wait until we get a foot or more of snow, my wife wants to plow next time. Plus I have cable chains comming from Etrailer, they should be here any day. Just in case my two wheel drive has tracktion problems in the deeper snow. Thanks a bunch, Etrailer!



by: Delmar09/05/2022
1990 Geo Tracker

I ordered these two, front and rear for a 1990 GEO Tracker 4 wheel drive that I am rebuilding. I believed they would fit, I finally got around to mounting them and they don't fit, to large. I think I have had them to long to return them.

Mike L.

9/8/2022

The hitch in question is a fit for a late 90s Jeep, its not a fit for a GEO Tracker



by: Kory 09/30/2023
1999 JeepCherokee

Exactly what I ordered. Ordered Tuesday shipped Wednesday received it Friday. Can't beat the tracking service they have it was very clear and accurate. Thank you for the great service



by: Excellent10/15/2017
2011 Nissan Xterra

I had a few hiccups while assembling (over tightening things early, I think) but once I got it together it’s been awesome. Clears easily and efficiently. Have used to clear as much as 14” of snow (that required pushing off to the side more often) but once you get used to the technique this thing is a lifesaver. I can clear a 300’ long driveway in 15 minutes or so for an average 4-5” snowfall.



by: Steven Vaal07/02/2016
1994 JeepCherokee

Hi George,
I received your email and
didn't realize it had been a year already. I'm afraid I don't have anything to say that you want to hear but I will tell you anyway. I spent about a week researching this hitch and read numerous reviews about it and how easy it is to install with installation times of 30 minutes to an hour, so finally I bought one. I read the instructions when I got it, looked simple enough. I've been building cars and motorcycles most of my life, a few hot rods and drag raced Harley's for 8 years, and I had to fabricate a lot of parts on the drag bike splus I've been a CNC Machinist for 30 years, and having just retired this project was on my list of things to do NOW! Well its been a year and the hitch is now sitting in the corner of my dining room. Either I have a Jeep Cherokee that is an odd ball or its just my crappy luck. In the directions it says to use the fishwire for putting in cm-sp1 and the bolt. I can supply pictures if you want but there is no access hole anywhere near big enough to get the sp1 spacer in the frame and the end of the frame isn't open either as the directions suggest. Apparently its either butcher the frame with a hole big enough to these spacers in, which I really don't want to do, or try to sell the hitch for whatever I can get and say the hell with it, except I really need that front hitch. I realize most people are very happy with your product, but I'm sorry to say I'm not at all. You asked!



by: Justin12/13/2018
Ford Edge

It does what it's supposed to do, puts the snow from my driveways into piles not on my driveways. Got it over some of the other variations because it doesn't have electronics or wiring to break when its -30.

-Cutting edge that came with mine has been decently strong for running on gravel driveways.
-Light enough I can mount/unmount whenever I need to.
-Doesn't tear up lawns, which is where I have to push most of the snow I move.

--Needs a through eyebolt for quick connect back dragging rather than the ratchet strap idea they sell.
--Side panels are the weak link of the system
they cut in hard and make the plow jumpy while turning
the nubs on the back are also not deep enough to allow the plow to free stand when storing
and as hard as they are they get jammed right up with any sort of twig/leaf debris you might be plowing up
---I'll be replacing these with some sort of steel or aluminum panel with a tubing edge once they start to fail.
-- The sliding parts aren't powder coated so they'll need to be repainted every year or two or its going to rust right out.

Overall though it does what I wanted it to do, and paid for itself by saving me a lot of hours not having to shovel or snowblow. And even if my vehicle were ever to go down I could toss it on the back of another vehicle to get the snow moved.



by: James J. 2014 Honda Pilot01/25/2018
2014 Honda Pilot

It arrived in about 3 days, in 3 packages. I researched online extensively before choosing the SnowSport HD. Price at etrailer was about 10% cheaper than other sites. I already had the front hitch on my 2014 Honda Pilot, so all I had to do was assemble the plow and go play.

I had watched multiple videos of using and assembling the product, before ordering. All the time shoveling my driveway with a shovel as I had to get in and out and keep the driveway, ice free for visitors.

Everything was in the boxes, not a single bolt or washer missing. Assembly was as simple as I expected. I completed assembly without assistance in about 90 minutes, at a normal pace. Neither my cordless (nor corded) drill would screw the 3/8 self tapping screws to connect the two blade pieces, but it was not difficult to do them with a ratchet.

I set the height correctly for the front hitch, and I have a 6 inch hitch drop/riser that that should give me good plowing with the back hitch (have not tested yet, but expect good results)

The design is very well thought out, it is a quality product that will probably last the rest of my life (home use). I recommend it to others, and I would buy it again.

I ordered the plow as we finished getting about 10 inches of snow over a couple of days. The temperature stayed below freezing and there was still about 6 inches of snow to play in, when I had the plow mounted. Based on some reviews I had concerns that it might not do well, pushing piles of snow, or the snow that had been sitting for days. I was pleasantly surprised to be pushing even snow the city snow plow had mounded in front of the neighbors driveway. I plowed the neighbors from the street and about 80 feet in, without difficulty, three passes in a couple minutes and the job was done.

I live in a 1950s ranch home, with a single car garage (in basement) near Pittsburgh PA, my Honda Pilot fits in the garage with just inches to spare going through the door. The 7 foot blade is just a little narrower than the side view mirrors. So I can drive in and out. I have the blade and mount in the garage, and they are light enough that I can mount the blade front or back while in the warm garage and drive out to plow snow. Pull back in the garage, remove the blade and drive into to town to go to the office for work.

I am so excited to have this plow that, it probably will not snow more then a trace for a couple of years... Fate denying me the opportunity to play with it for a long time.



by: Wobble08/22/2011

Great piece for the price. We removed the front spoiler first to make install easier. If you replace each of the rear sway bar bracket bolts with the new longer ones and thread them in 1/2" you can then remove the front ones and slide the hitch in under the sway bar mounts. This saves you from trying to hold up the hitch and sway bar all at the same time.
Mark for drilling then remove mount while you drill and fish in the front bolts and spacers.

Whole job was around 40 minutes,

Mark for drilling then remove mount while you drill and fish in the front bolts and spacers.

Whole job was around 40 minutes, " />


by: Tom12/08/2011
1993JeepCherokee

Fit on a 93 Cherokee Country model. Instructions were well written and accurate.



by: Greg Blanchfield10/09/2017

This is the second I have purchased for the front of my 1999 xj and now my 1990 xj . I drilled the hitch for my Curt tow bar and use grade 8 bolts and backing plates. The first one worked great,the second one the side mounting plates were jigged and welded at two different angles,which caused alignment problems. I was able to make it work but the factory should check their quality control!



by: Kacey11/02/2016
GMC Sierra 3500

Great plow, fit my pickup good, cut my plowing to a third of the time. My pickup is a 1 ton diesel 4+4 bolted it on and went to work!!



by: Gary Fickes08/25/2014
2010 Ford Escape

I had ordered a rear hitch receiver for my 2010 Ford Escape a few years back and was very pleased with the application and use I've gotten from it. This Curt front mount receiver was a breeze to install and I will be using it primarily for my snow plow on my '89 Jeep Cherokee, which matched up perfectly. Thanks for providing good products and service.



by: Vincent R.08/05/2013
1999 JeepCherokee

This hitch fits perfectly on my 99 xj. I was worried about frame damage because I was in an accident recently, but everything lined up perfectly. This could have really been installed in less than 15 minutes, but since I have a heavy duty aftermarket front bumper, it took an extra hour or so to trim the 1/4" thick steel bumper for the hitch to fit.



by: Michael. E02/19/2018
2011 Honda Ridgeline

The shipments arrived within days of ordering. The snow sport HD had easy to follow instructions . The plow was put together without any problems.
I had my local mechanic install the front receiver for me on my 2011 Ridgeline.
A day after everything was set to go, we got about six inches of wet snow.
I used the plow and I was very happy with it’s performance. I was able to clear my driveway and my neighbors in very little time. Overall I think it is a simple but effective plow for homeowners.
Mike E

.



by: Keith W05/22/2017
1999 JeepCherokee

Nothing Wrong with the Product it is the Installation Directions , I have a 1999 Jeep Cherokee it Fits as directed but i had to remove the front Bumper there were a slot on the frame to fit the CM-SPI through with not using the Fish wire did need to Drill a hole in the frame to get Carriage bolt to fit thru like it says .
The Directions covers lot years and Vehicles not very well i worked on many Vehicles in my life and equipment any one how has no real mechanical training or experience be very confusion by them .



by: Carl01/07/2018
2010 Jeep Grand Cherokee

This is the greatest invention I think that has came out in a long long time don't let How deep the snow gets worried you because this product will plow snow all day long with no problems I've plow through snow in my lawn that has been 3 foot deep measured with a solid yardstick no problem to push it and that's on a Jeep Grand Cherokee that's the nice thing about this plow when you go pushing snow the deeper it gets it just moves up and down and keeps pushing the snow in front of you just make sure you push the snow back far enough the first time as with any plow wherever you leave your pile and it freezes in you won't move it again super great product this is my second one my first one I bought 10 years ago and it worked for 10 years with no problems whatsoever finally sold the vehicle so I let the plow go with it big mistake but that's okay cuz I just bought a brand new one great product great design anybody thinks this product won't work in Canada Alaska Erie PA this plow will work wherever there is snow.



by: Scooter08/13/2009
Jeep

Mixed review.The cost was great, but installation was tough. The instructions called for 30 minute install- guess I went several hours over that. In all fairness, I also installed a new set of sway bar bushings while I was there and that added to the complexity. The meat of the problem is that the holes did not line up perfectly. I ended up gumming up two of the bolts but was able to salvage them with a small file. Had to run a tap back through the nutserts in the frame to clean them up as well. In the end, got one side finished, hooked up a come along to the tow hooks and pulled it perpendicular to the frame from another parked vehicle to "stretch" it place. No my Jeep does not have frame damage. The holes were just a little off. Could have used a file to open up the holes, but did not want to have to remove the whole assy again and refit. It does look nice and I have no doubt that it is solid. A request to Curt would be to include longer bolts. An extra 1/4 inch would have made the job a whole lot easier.



by: Richard11/27/2017
2011 Ford Ranger

Received and installed the plow today 11/27/17. The directions were perfect also the components fit great . I had ordered and installed a two inch front hitch on my 2011 Ford Ranger 4.0 liter V6 with no issues. Now just waiting for some snow to fall in upstate NY. Very quick ordering and delivery will recommend



by: Mike L12/28/2010
JeepCherokee

Curt front hitch for Jeep CherokeeAs usual, etrailer shipping always has what I order at my door within a couple days... gotta love that! This hitch was a snap to install, bolted right up with only 1 hole to drill per side. Hardest part was breaking loose the existing bolts on the frame, but after that, this was an easy install.



by: Ron C.06/14/2016
1999 JeepCherokee

No problems with the hitch. It was a little tough drilling through the hardened steel, but I was able to get it done. I used the hitch to pull my Jeep to the shop for a repair it needed. It worked great.



by: Jonathan02/23/2018

The snow plow is as expected, built solidly and easy to assemble. The plow itself comes in two pieces which was unexpected but seems sturdy when bolted together. It also skips across my snow/ice packed gravel driveway, but I expect it will work well moving fresh snow. For the money it is a great entry level plow.



by: Macon 11/05/2008

Simple efficient design.Had mine several years. A real simple to use/maintain plow.
Be sure to get a front-mounted receiver for your vehicle if you can - much easier to maneuver the plow with it in the front.
No hydraulics or electrical to install/maintain. Quickly clears the driveway. Hang it up out of the way in the Spring.



by: Thomas 10/14/2021

Great value and well built. Easy to install, and a great solution for a front recovery point.


25
49
Show More Reviews

Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?


  • Recommended Front Mounted Hitch for a 2016 Dodge Ram 1500 Rebel Edition
  • There is a front mount hitch to fit your 2016 Dodge Ram 1500 Rebel model but the Curt item # 31084 will not work. Instead you will want the Draw-Tite Front Mounted Hitch item # 65062. This is the only front mount hitch that is confirmed to fit the Rebel model Ram 1500s.
    view full answer...

  • Front Mount Hitch For A 2010 Chevrolet Suburban 2500
  • Though there is not a custom made front mount hitch for your 2010 Chevrolet Suburban we do have an option for you. The Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 can be welded onto the front of your 2010 Chevrolet Suburban and be used as a front mount hitch. It has a black powder coated finish that covers an e-coated base that offers superior rust protection. It has a tongue weight up to 1,600 pounds. You can also use The Draw-Tite Ultra Frame Service Body
    view full answer...

  • Trailer Hitch For A 1991 Toyota 4x4 Truck
  • We do have trailer hitches available for your 1991 Toyota Pickup but we do not have a front mount hitch available. The etrailer Trailer Hitch Receiver # e96KR has a bolt-on installation with no welding required. It has a matte black powder coat finish that is over a protective base coat that offers a superior rust resistance. The etrailer hitch has a maximum gross trailer weight up to 5,000 pounds and has a maximum tongue weight up to 500 pounds. I would recommend checking your vehicle's
    view full answer...

  • Installation Instructions for Curt Front Mount Trailer Hitch Receiver # 31084 on 1999 Jeep Cherokee
  • I have attached the installation instructions for the Curt Front Mount Trailer Hitch Receiver, # 31084, on a 1999 Jeep Cherokee. The link to the instructions is located on the right of this page.
    view full answer...

  • Front Mount Hitch For A 2022 Ford F-350 Super Duty
  • Though The Curt Front Mount Trailer Hitch Receiver # 31084 is not confirmed to fit your 2022 Ford F-350 Super Duty The Curt Front Mount Trailer Hitch Receiver # C31078 is confirmed to fit. The Curt Front Mount Hitch # C31078 has an easy, bolt-on installation with no welding required. It has a gloss black powder coat finish over the steel that helps resist corrosion. The hitch has a line pull up to 9,000 pounds and has a vertical load up to 500 pounds.
    view full answer...

  • What Size Holes Need to be Drilled to Install Curt Front Hitch # 31084 and Draw-Tite # 65009
  • For the Curt front mount trailer hitch, you will need to drill two 17/32 inch holes in the bottom of the frame rails. There should not be anything inside the frame rail so you should not worry about punching through with the drill. Take a look at the instructions link I have provided for you. The Draw-Tite hitch # 65009 requires a 1/2 inch hole. I have included a link to the instructions for it as well.
    view full answer...

  • Recommended Hitch For A 2021 Ford Transit 350 Cutaway Chasis
  • When it comes to your 2021 Ford Transit 350 Cutaway Chasiss we do not have any front mount hitches or custom trailer hitches for your Ford Transit. The Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2 inch Receiver - 60 inch Wide # 15903 is a universal weld on hitch. It has adjustable side brackets that slide along the hitch body to match exactly where you want to weld the hitch. The hitch has a black powder coat finish that resists rust and corrosion. I attached a review video
    view full answer...

  • Front Mounted Trailer Hitch Receiver Options For A 2003 Nissan Frontier
  • Hi Hank, It unfortunately looks like there aren't any custom-fit front mounted trailer hitch receivers for your 2003 Nissan Frontier so the next option would be an adjustable-fit weld on hitch. We offer a few different drops to help get the receiver tube under the fascia so you'll need to do some measuring from the frame to determine the drop needed. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop
    view full answer...

  • Front Hitch For A 2020 Chevy Express Van
  • I do have a potential option for you, but we do not offer a custom fit front hitch for your 2020 Chevy Express Van. Instead a weld-on universal hitch like # 41990-07 which offers a 7 inch drop could work for you. Since this is not custom fitted, you likely will need to make some modifications to the fascia and/or front bumper in order to install.
    view full answer...

  • Universal Front Mount Hitch For A 1999 Jeep Grand Cherokee Laredo
  • I may have an option for you but the Curt Front Mount Trailer Hitch Receiver # 31084 will not fit on your 1999 Jeep Grand Cherokee Laredo. It will not fit your 1999 Grand Cherokee due to the difference in the frame and the bumpers. With there being no custom fit front mount hitches for your Cherokee, the only option that we have is a universal hitch receiver like the Curt Class V Universal Weld on Receiver Hitch # 15902. You will have to fabricate this front mount hitch onto your Jeep.
    view full answer...

  • Can a Front Mount Trailer Hitch be Used to Flat Tow a 1991 Jeep Cherokee
  • A front mount trailer hitch like # 31084 can be used for a winch or for pushing around a trailer to get it in the right position but you can not use it to tow your 1991 Jeep Cherokee. You would not be able to turn properly with a single attachment point at the center of a 4 wheeled vehicle. To flat tow a vehicle you will need a special attachment called base plates, a tow bar, safety cables, lighting, and supplemental braking. Base plates and a front mount hitch cannot both be installed
    view full answer...

Info for these parts were:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Jeep Cherokee Accessories