Part Numbers: 16516,C16418-204
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Sturdy, secure fifth-wheel trailer hitch has a dual-pivot head with Permalube bushings and a slide-bar jaw for a smooth ride. Non-binding slider ensures proper clearance during slow turns. Rails and universal installation kit sold separately.
Features:
Specs:
With a dual-pivoting head that offers 10 degrees of lateral movement, the E16 fifth-wheel hitch makes hookup a snap, even on unlevel ground. Once the king pin slides into the hitch, the auto-locking, slide-bar jaw secures it in place. A unique feature of the E16 is the rear steel tension bar within the jaw that activates upon hookup to clamp down on the king pin, providing a tighter grip that maximizes security and minimizes rattle.
Specially designed for trucks with 6' to 8' beds, this non-binding slider helps to eliminate clearance problems during slow-speed turns. When you are towing a fifth-wheel trailer, your hitch must be situated on the cab side of your truck's rear axle. However, at slow speeds you can use a roller to slide the fifth-wheel hitch (and the trailer) toward your truck's tailgate and past the rear axle, creating enough space between the cab of your truck and the trailer to permit less-restricted turning.
Install your fifth wheel trailer hitch in half the time with this custom bracket kit. Requires less drilling than universal kits and provides a custom fit for your vehicle. Includes everything you need for installation.
Features:
Average Customer Rating: 4.6 out of 5 stars (641 Customer Reviews)
Sturdy, secure fifth-wheel trailer hitch has a dual-pivot head with Permalube bushings and a slide-bar jaw for a smooth ride. Non-binding slider ensures proper clearance during slow turns. Rails and universal installation kit sold separately. Install your fifth wheel trailer hitch in half the time with this custom bracket kit. Requires less drilling than universal kits and provides a custom fit for your vehicle. Includes everything you need for installation.Nice well made with thick material. Time would tell how sturdy it is. Easy to install, clear instructions with everything you need for it. (Nuts and bolts).
This is my second mounting kit that I get for my trucks.
High quality, heavy duty system. Bolted right in and instructions were easy to follow. I feel good about pulling our camper with this set up. Only issue was shipping, the box was damaged and was missing the pins that were ordered. But customer service quickly got thing fixed and resent.
Etrailer sent me a one year follow-up email. Since purchasing this I've used it to tow our 11k lb camper about 5k miles. The hitch and slider have worked exactly as they should and I have no complaints.
Well, I haven't towed with it yet but we'll see how that goes.
I purchased this hitch because I needed to drop the height as much as 6 inches.
My previous hitch was dropped to the lowest setting and still 17 inches high!
This E16 goes down to 14 inches...
Assembly was straight forward and all pieces were present ( even 4 big washers which were not illustrated anywhere in the instructions as to where they went)
The hitch seems well built but the welder needs to be more thorough in cleaning his Slag (got my finger good when I picked up the top plate)
Stickers were falling off everywhere (my heat gun fixed those)
But a couple notable design flaws...
The top cradle for the 5th wheel plate is a triangular shaped arch and the top plate has an axle which is perfectly round. So when the 5th wheel assembly is down in the cradle, there are only two little points of contact instead of the cradle fitting uniformly around the axle rods...we'll see what kind of wear this causes.
Next, the green ring on the indicator rod looked like a 3 year old toddler wiped lipstick on it. (Green paint is supposed to be in the little groove cut in the rod but instead, is smeared all over the end of the rod)
Lastly...
The side plates have a two rows of holes for height adjustment...I have installed the bolts to position the overall height at the lowest possible setting. However, there are two more holes in the tie plate but the casting prevents the sideplates from dropping down even lower. Definitely confused as to what the extra holes are for and disappointed that I can't drop this even lower...
Definitely seems heavy duty, but again, I haven't towed yet, so hopefully the play in the base rails doesn't translate into obnoxious clanking and rattling....
If so, I will definitely be doing another review
I have a year of use into this hitch. It rolls surprisingly easy. The hitch is able to be taken apart into two main pieces.
This thing is HEAVY. Even in two parts it's stupid heavy. I don't expect anything less but man, if you are buying a sliding hitch, you better NEED it(shortbox truck).
Successfully installed this hitch even in a RAM Box. I did remove 2" from the handles so I have the proper clearance for the RAM box. That shortened length hasn't changed my ability to unlock the hitch for either function even being 5'-8". I do think this installation method with U-bolts that go around the frame is easier than the 1/2 ton version I installed which pulled knurled bolts through the factory frame holes to hold the support brackets.
Installed nice no instructions on the right rear front bolt on a 2017 3 quarter ton Ram pickup rear end mounted were they wanted you to put the bolt on the coil suspension Dodge
It went together easy. I installed it in my ram 1500 short bed 5.5 bed and it works good.
Upon delivery the box was a little banged up. Everything was inside was still in good condition. To my time with install to insure proper alignment, the only thing I can say negative about it is, you need 4 additional 3/4 inch washers for the frame bracket bolts that are not included, at least I did! On both sides. In the end it was a rather easy success.
Jacob
6/30/2022
There were no parts missing! Just 4 extra 34 inch washers were needed
My wife and I assembled this 5th wheel hitch in about 40 minutes. It’s very straightforward and could be done just by looking at the picture. Just 9 bolts and 6pins a little grease and you’re done. I used thread lock on the conical allen bolts all the other bolts used self locking nuts. We are in our 70’s so someone younger could probably do it faster.
Good solid hitch, a little lower in height than anticipated, but works fine.
2004 Chevy Silverado 2500HD, installed the Custom 5th Wheel Installation kit along with the Q16 Slider Hitch. Product arrived very quickly after ordering. It was shipped in 3 different boxes. One box was a little beat up during shipping, but all of the parts were there and undamaged. I watched the installation video once, then my brother-in-law and I tackled the job which took us about 2 hours. This was not difficult to install other than trying to get the 1/2" bolt through the hole on the driver side of the frame (the frame is boxed there). The included wire guide helped, but you still have to manipulate the bolt into the right position in a very tight spot. Everything turned out to be a perfect fit, no modifications needed. Also, I removed both rear wheels before starting which gave us plenty of working room. I have purchased from etrailer in the past and will continue to use them in the future.
Excellent product and fantastic customer service. The hitch was easier to install than expected with the prefabricated brackets and installation kit.
Installed on my 2005 Chevrolet 2500. Used install videos from your website and had no problems at all installing. Fast shipping also. Thank you for a great website!
This kit is perfect! Comes with everything you need with easy to install instructions. I’d recommend this and other etrailer products. They match all factory specs. Simple and easy
Keagan K.
11/8/2023
This system worked perfectly, and was very easy to install.
I have a short bed truck, and using the Curt 16516 system Curt E16 5th Wheel Trailer Hitch w/ R16 Roller, will give me the added clearance I will need for tight turns and maneuvering. Curt's instructions were fairly clear, and parts were well defined. These products are extremely well-made.
Once again, etrailer shipped quickly. Their communication and customer service are great. Thank you etrailer team. I am now ready to get my rig on the road.
Well built. Some bolts are a bugger to get tightened up but not bad. Didn't remove the heat shield.
While the jury is out on pulling with this 5th wheel hitch, etrailer did a really nice job promptly shipping my order. The unit is exactly what I expected and installed onto my base rails quite nicely. Thanks guys.
Hitch is well made and went together without a problem.
I like the slide mechanism, works smoothly.
I looked at other hitches and this one seems to have the best features for the price.
Shipping from etrailer was fast even with the holidays.
First of all Etrailer.com shipped the hitch the same day ordered and I recieved it the next day. Outstanding! The hitch installation went well however the directions could be better. Just installed and haven't towed yet. So far very pleased.
I ordered on a Monday and got the equipment on Wed. I started the installation Wed after noon. Finished Thur. about 11:00 am. I did all the work myself with a little help from my son on holding the U bolts. I am 75.5 years old and had no trouble with the instructions. Thanks. PS Added the Jeep picture for fun.
This is my first hitch. I decided to go this route after finding out the dealership wanted over 1500 to install rails hitch and plug.
Install was not too aweful bad I did the install in about 4 hours of everything. I took my time so nothing would be screwed up. The install videos where awesome and very discriptive.
Bought hitch last spring, put over 3000 miles on it, still works great. A big plus is that you can remove the top half separately. This makes it much easier to install the hitch with 1 person. It rattles a little bit but nothing major. The slide part work great.
Had an issue with my bank denying my order of two of the same items. Talked to Adam with customer service and he was fantastic. He got everything straightened out and received my order in less than two days
Great kit. Bolted together quickly! The boxes being heavy caused holes to be punched into the boxes. This caused a nut to go missing for the hitch release handle.
Ask the Experts about this Fifth Wheel Hitch
Do you have a question about this Fifth Wheel Hitch?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
6/30/2022
I emailed you a picture of the parts list, which items are you missing?