Set up a welcoming glow with Thule RV exterior lights. Match your awning channel with 8mm or 12mm LED strip widths, or use a self-adhesive strip when no channel is present. Select options offer 12 volt power and trim points every 2", so you can dial in the length and keep light levels comfortable at your site.
Yes, certain Thule LED strips can be trimmed every 2". Some options are 20 foot long and can be cut down shorter as needed. Look for the cut marks on the strip and only cut at those points. Test the lights before final mounting.
Match the strip width to your awning channel. Thule LED strips come in 8mm and 12mm, with width being the only difference noted. Measure the channel opening before you buy. If the channel is tight, the 8mm option helps. If it's wider, the 12mm fills the track better.
Expect useful light without being overly bright at a campsite. Feedback notes enough light to see at a site without annoying others. If you prefer dimmer lighting, mount it further back from the edge or use a narrower strip to reduce glare.
Yes, use a Thule self-adhesive LED strip. It can be trimmed every 2" to fit the awning length and runs on 12 volt, so no inverter is needed. Clean the mounting surface and dry-fit to confirm placement before peeling the backing.
Filters