Easy place to shop. Fast delivery and great products. Very happy with my purchase.
Ed
Boynton Beach, FL
Rampage Grille Guards for quick, clean installs
Upgrade the front end with Rampage grille guards that help protect while keeping installation simple. They mount to existing bumper bolts with no additional hardware, and factory fog lights can move to the guard's mounting positions. Tow hooks can stay in place, and you may just swap them side to side to fit.
Yes, tow hooks can be used with a Rampage grille guard. You may need to remove them during install and then reinstall them with the guard. If there's interference, swap the hooks from one side to the other to get them to fit. Check that the guard and hooks share the same bumper mounting points.
No additional hardware is needed. Remove the Torx bolts on the front bumper assembly, position the guard over the holes, and reinstall the Torx bolts. It's fine to mount metal on top of the metal bumper. Verify you can remove and reuse your Torx bolts.
You may need to relocate the lights. The guard can mount where factory foglights sit, and there are mounting positions on the guard to remount the foglights. Unplug carefully and make sure the wiring has enough slack before moving the lights.
Installation is straightforward. It uses the existing Torx bolts on the front bumper assembly for a simple bolt-on setup. Be ready to relocate fog or driving lights if they share those mounting holes. Test-fit to check tow hook clearance and whether a side-to-side swap is needed.
Filters