Product Specs:
RV and Camper Hitch
Frame Mount Hitch
18 - 51 Inch Wide Frame
Bolt-On
Weld-On
2 Inch Hitch
500 lbs TW
5000 lbs GTW
CURT
Adjustable trailer receiver hitch designed for use on RVs can be bolted to the vehicle frame or welded on for a no-drill application. Powder coated steel is sturdy and corrosion resistant.
Video of Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide
Average Customer Rating: 4.4 out of 5 stars (34 Customer Reviews)
Adjustable trailer receiver hitch designed for use on RVs can be bolted to the vehicle frame or welded on for a no-drill application. Powder coated steel is sturdy and corrosion resistant.Bought a new Jeep Wrangler 2-door that I wanted to tow cross country. The existing hitch on my Gulfstream BT Cruiser was only rated at 3500 lbs. and I wanted to upgrade that to 5000 lbs. which was allowable after checking all the weight measurements. Found this adjustable hitch on etrailer.com and thought it would work for me. I mounted the brackets and cross bar temporarily to center the receiver and then mark where I needed to drill into the cross bar. Removed the bar and drilled using a step drill bit and finally the regular drill bit. Mounted everything up loosely, then tightened moderately to make sure everything fit right. Then loosened each bolt, applied red loctite, and torqued to spec. Towed the Wrangler over 4500 this past fall and the hitch worked perfectly. Can't be happier.
I called etrailer to get dimensions on a different hitch I was thinking of ordering. Carrie asked a few questions about my vehicle, which is a 2020 model golf cart that is so new, they haven’t made an own hitch for it yet. She then guided me to this adjustable Curt hitch. I am very grateful for her help. The hitch fits well.
The email I got said that this product was delivered however I have not received it. Half the order ... a cargo carrier ... was delivered and was in my driveway when I got home from work. The trailer hitch was not there. I checked my mailbox in hopes that the hitch was at the Post Office waiting to be picked up but there was no notice. At this point I am hoping that the delivery driver for some reason overlooked the hitch but I have to admit I am a little on edge over this. While it was a good price on the product it still was not cheap and I have paid for something that I have not received.
It didn’t fit on our 2021 Winnebago 2306bhs. The tail end of the trailer has too many rivers to find a spot to drill and attach this.
Very sturdy (and heavy !). Use it for 2 e-bikes for thousands of miles with no issue. Once properly set up, Keeps the bikes separated with no banging on each other.
Well made, however would like to see a single through-bolt to secure the cross piece. Vehicle with low ground clearance presents difficuties when required to fish bolts through frame (4 of them). Shipping notification is state of the art.
Very sturdy build. Easy installation. My only complaint is with the shipping. Etrailer chose to just drop a 50+lb item in a large cardboard box and send it. Thankfully the parts were shrink-wrapped to the hitch and nothing was lost.
Great product and solid connection to the front of the Discovery 2. Some out of the box thinking to install but most was cutting to fit. All mount points original in frame and slide mounts on hitch were great. Used upside down on mounts and then hung between frame rails.
Thanks for the fast delivery you guys are the best
Product is very well built and looks nice. You may not want pictures of it, as I am installing it on the front of my pick-up to carry a bike rack. The hitches made for the truck put the hitch right in the middle of the license plate--this one will ride very nicely below the air dam below the bumper.
Didn't fit on the back of our RV haven't used it looks nice
Well made very strong package grade box wasn't torn awesome appreciate the fast delivery I got a 2 days quicker than I thought and I appreciate it every bit got it assembled today waiting for the rain to stop trying to get it on Monday thanks again
Amazing. Had the hitch welded to my fifth wheel to carry our bicycles. Works perfectly
The product is perfect! It didn’t do well in shipping. The box was all torn up and two feet of the bar was sticking out. It wasn’t bent and nothing was missing. That speaks to the strength of the product. Poor shipping is the only reason I gave it a 4. The product itself is definitely a 5.
Installed this hitch on a bus conversion. Installation went well with few modifications.
Although its still sitting on the shop floor it looks great and is heavy duty !! and i am very impressed with shipping came 4 days earlier then expected, that is why its still on the shop floor waiting to be installed I pre scheduled it at the time i expected it. at the welding shop . I called them they could not get it in earlier ( I guess they are not etrailer )
Hitch was perfect and installed easily. The powder coating and hardware were high quality.
This hitch is good, and was an adjustable,but too much work for my 2020 transit motor home
Perfect fit and fast delivery
Excellent quality, The price was right. Received the product quickly.
Michael H.
10/29/2018
No problems at all. Built for the long haul.
I love it the only thing is it took 4 hours to install because I had to make adjustments well worth it excellent quality price was right will do business again with you agsin
Good quality product but had to make modifications to make it fit my Cardinal Estate's wide frame. Don't recommend doing that unless you're a good welder
Hitch has worked really good. Did a trip to Moab UT. No problems. Very happy with purchase
Was able to modify this hitch to fit my needs and its working very well.
Customers compare C13702 to these similar products
VS
Product Specs:
RV and Camper Hitch
Bumper Mount Hitch
4 x 4 Inch Bumper
4-1/2 x 4-1/2 Inch Bumper
4-1/4 x 4-1/4 Inch Bumper
Bolt-On
2 Inch Hitch
200 lbs TW
Swagman
Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.
Video of RV Bumper 2" Trailer Hitch Receiver - Clamp-On
Average Customer Rating: 4.8 out of 5 stars (122 Customer Reviews)
Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.Hold up well after 160 miles camping trip. Mounted at 4” rear bumper of my camping trailer to accomodate 2 bike rack. I only carry 1 bike for the trip. Solid and well secured using provision screw that you need to tightened once bike rack is mounted to avoid movement when driving.
Very happy with the item. Well-made, and fits my RV bumper.
Very pleased with this product it's robust and solid, the bolts and lock nuts are high quality. Ordering and shipping were easy and fast. The part fit perfectly I used some gasket material to protect the bumper, would have liked to have the torque specs on the nuts. I use a Thule bicycle rack and this hitch allows me to bring along the bikes on my 5th wheel.
Great vendor, great product.
We have 6 trailers at our home; 2 boat, 1 tandem utility, 3 single axle utility that need to be moved around frequently for space reasons.
Airports need to "push back" planes from their gates for which the "tugs" have hitches on their front bumpers. That arrangement allows greater steering control than if their hitches were mounted on the rear of the "tugs". So, I've mounted this wonderful hitch to the front bumper of my '86 Isuzu Trooper II 4-wheel drive which I use to position my trailers. Of course it's NOT safe for highway travel, but as a positioning aid, it is superb. Also; etrailer communications and speed of delivery cannot be improved. Don't change anything, etrailer.
I'm using this to mount a pretty large and heavy 4-bike rack to the rear bumper of my camper. This thing is stout. It has nylock nuts so I don't have to worry about the nuts backing off. Also has a threaded bolt hold in the side w/ bolt so that you can snug up whatever you put in the receiver (bike rack, etc.) to keep it from swaying. I really like that feature.
Kevin
6/18/2021
The receiver itself is great. I still have it on my camper. My campers bumper on the other hand was not up to the task of stress that a fully loaded 4-bike rack put on it. The bumper could probably handle 1 or 2 bikes just fine but the rack I have puts too large of a moment on the thin wall square tube bumper.
Opened the box and was immediately impressed by the construction quality of this bike rack receiver. Easily installed on the bumper of our trailer and again, I was very impressed with the sturdy bolts, back plate and receiver. Too bad Swagman doesn't make one of these for my inferior spare tire holder.
Michael J.
4/23/2015
This is a great product, period! Perfect match for my 4 trailer bumper and my bike rack. But more importantly is the quality service I receive from etrailer. They are a great source for everything you could possibly need for your trailer or RV. Ive ordered several items from them and the quality is always 5 Star! Cannot say enough good things about their customer service. They are 5 Star from top to bottom. They set the standard for customer service and products.
Luck was on your side for a nice piece of furniture for my trailer. The package arrived ok but when I went to open it -- I had no trouble. The shipping expert had forgotten to tape the box on the lid!!! Thankfully because the connector was tightly packed, it did not fall our and break someones foot or get lost and thrown in the trash.
John
6/11/2021
Like it is supppose to!
The RV Bumper Hitch Receiver is of great quality and is easily installed. I used it to mount to my trailer steel bumper so I can carry my bikes which mount on a receiver type rack.
John M.
8/16/2016
All three of these products have held up well and performed well. Thanks.
Swagman hitch fits securely on our 4” trailer bumper. Our standard bike rack works fine on the hitch. I have had several campers ask me where I got the bumper hitch and have recommended etrailer for their solid customer service
The Swagman RV Bumper 2" Trailer Hitch receiver is a very solid hitch receiver especially for the Swagman Dispatch 2 Bike Platform Rack - 2". Along with the threaded pin from the bike rack and the set bolt on this receiver there is no play or movement in the receiver tube. My bumper is 4" square and will require spacers on the back side to fully secure, minor issue.
Etrailer service is always top notch with fast shipping. They are my go-to whenever I need parts or service items on my RV's trailers or truck.
About this hitch. Easy to install & does the job. Needed it to carry bikes on the back of our travel trailer. Due to ground clearance as you leave some gas stations, I would not mount it below the bumper you may drag the bikes on the ground. In fact they say not to bolt it underneath the bumper due to the limits of the bolt strength. So for what it is intended for, it's a great solution.
Works great on travel trailer tube bumper. As cheap to buy rather than making it
Purchased to fit on my RV bumper for bike rack/cargo carrier. Installation is as basic as you can get. I was surprised that the bolts were grade 8, but there were no washers. See no reason why it won't work very well.
I ordered the Swagman RV hitch s64025. Upon receiving the hitch early Wednesday afternoon, I opened the box and noticed that the bottom plate was missing. I immediately called etrailer and spoke with Crystal. She was sympathetic and totally understanding of my situation. She immediately placed an order for a replacement. I received the replacement hitch early Friday afternoon. I'm just waiting for instructions to return the old hitch. The original box may have been opened somewhere during shipment--I can't be sure. However, I would not hesitate ordering anything from etrailer. I ordered other items as well and they all arrived on-time and in good condition. A big Thank you Crystal, and I would be remiss if I didn't thank Reesa, and Tiffany for their help in placing other orders. This is what I call a Five-Star customer oriented company--nothing short of OUTSTANDING!!!
Had it for a year now it’s holding up perfectly, still looks like new. I use it for my bike rack and it works great.
I installed this item to mount the Prorack 2 bike rack on the bumper of our new trailer so that we could conveniently carry 2 lounge chairs. It was nicely fabricated and finished, and installed easily with the hardware included. I'd have given it an "excellent" rating, but I'm not sure that there won't be some future corrosion issues with the bolts provided due to the type of surface treatment. However - with this stated - I'd definitely consider purchasing this item again to meet a similar need in the future.
RV Bumper Hitch attachment: Works perfect! I use two, one on each end of the bumper to attach flag pole holders. Have already had comments about the product and the professionalism of the staff and the quick mailing was impressive!
Installation was simply bolting the product onto the bumper, how easy is that!!??
No more use of U-Bolts and or having to weld pipe onto the RV in order to flag my NASCAR flags at the track(s).
Do not be doubtful of this product!! Get yourself one or two!! Thanks etrailer!!
Good product, reasonable price, easy to find on etrailer. Just what was needed to add a bike rack on the rear bumper of our travel trailer. Just as advertised, works fine, seems strong enough - though time will tell. Arrived in good time, as predicted.
This clamp on hitch receiver arrived in only a couple of days although I live in Southern Ontario Canada. The finish and welding on this product are excellent. I will use it for attaching a bike rack to the rear bumper of our new travel trailer. I purchased the bike rack some months ago from etrailer. That was also very good customer service experience.
Just right to add a bike rack, not load rated to add a trailer.
Would prefer locking nuts, but easy to find at hardware store.
Perfect for my new RV. I like the all black finish, bolts included, that goes well with the black bumper. It will be used for a two bike carrier and looks to be rugged enough, I'm sure it is, and time will tell. I think it will be great.
This hitch was the perfect way to mount my bicycle rack to the rear of my trailer. We have used it several times in the last year with no problems. It was easy to install.
Received the product and installed it today - easy installation. I have another hitch receiver that I bought years ago, but it's at our home in Florida and we're currently in Ohio. This one is much better quality, but also cost over twice as much. While we won't be leaving to head home for a month, I foresee no issues with this receiver handling the bike rack and two bikes.
Bolt-on 2" receiver for bike rack on RV bumper. Wow! Excellent quality, super construction, welds & finish, easy install. AND fast delivery. Thank you etrailer!!
Been using this for a year on our camper bumper for bike rack. So far so good!
Customers compare S64025 to these similar products
Sierra K.
10/19/2021
With universal and adjustable RV hitch receivers, some modifying and tweaking may be needed. This item will only work on box frame or C-channel frame RVs. The main hitch body tube can be trimmed so the ends are flush with the frame brackets, but you will have to repaint the tube. Welding may be easier to get a more custom fit with this hitch receiver, but you will need to file away the powder coat to bare metal in order to get a good weld.