Product Specs:
Accessories and Parts
Trailer Brakes
Disc Brakes
Electric Drum Brakes
Hydraulic Drum Brakes
2-3/8 Inch Diameter Axle
10 Inch
Brake Mounting Flange
Redline
Trailer Brake Mounting Flange - gets welded to the end of the axle beam to support the brake assembly.
Video of Brake Mounting Flange for 2-3/8" Round Axle
it works
I wanted to install brakes on my enclosed trailer, but the axle didn't have the flange to mount the backing plates. These flanges had the correct bolt pattern for the brake backing plates and the correct center hole to slide over the machined area on the 3500 lb axle, for an easy weld-on upgrade.
I got my trailer down now and need it badly tomorrow
Service was good and shipment was rite on time. One of the grease seals was bent in the shipment but I think it will work time will only tell. I was hoping that Dexter being made in America that they would use American made bearing also, they don't . The only other thing was I Thought I was getting bearing buddies but after looking back at the description I see that it wasn't , that is my mistake for not knowing better. I would have saved 18 dollars being I used my old grease caps instead. But over all I will use this company again great service. Keep up the great work.
Product arrived in excellent condition and clean. I was eligible for free shipping. Order was placed on sunday afternoon and received north of NY state on next friday. I would definitely consider buying from etrailer again.
Once I received this brake flange, it turn out great.
Remember to get the large opening for 3500# axles.
fits right on a heavy duty spindle ready to weld on for a brake flange. Good solid metal.
Good source for all trailer parts. Quick shipping.
The package arrived today, look great! (Brake flanges)
I ordered around 1:00 pm and received a email around 5:00 pm stating that they have shipped, could not believe this, but they are here.
Thanks for all the promptness!!
Merv L.
Perfect fit and easy install now I have brakes on my trailer!
Flange was a perfect fit, quality material, would buy again if needed.
product works great still in like new condition ! A++++++
Every part I've gotten from eTrailer.com has been with perfectly sound advice in choice and application. You are most certainly the best place to go for all of one's needs.
great products, project went well.
work very well for the job thanks
not sure decided not to use it
Worked Awesome!!!
Product Specs:
Accessories and Parts
Trailer Brakes
Disc Brakes
Electric Drum Brakes
Hydraulic Drum Brakes
1-3/4 Inch Diameter Axle
7 Inch
Brake Mounting Flange
Redline
Video of Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
I have a 2004 Honda trike that I built a pull behind trailor for! After pulling it loaded it was hard to stop safely! This brake assembly along with the Redarc brake controller done the JOB! now it stops safely
I had to replace the old hydraulic disc brakes on my Tryton 20' snowmobile trailer and need to add new mounting plates for the new electric drum brakes. These worked great. Cut the old mounts off the spindle and welded these on. A whole lot easier than making from scratch!!!
Dennis W.
9/16/2020
Works great
4-34 four bolt mounting plate is an excellent replacement for my 1997 Coleman Fleetwood Bayports popup campers that I am close to finishing a restoration process on. They fit perfectly! Very happy to purchase an excellent product from the fastest shipper I have ever come across. I am blown away by the professionalism with this company!
Thanks
I'm adding electric brakes to my boat trailer so I need flanges for mounting the back plates. Not yet installed but it looks like they're going to fit and work fine.
Electric Brake kit for trailer this time.
The parts are very acceptable and the service is supreme.
Couldn't get any better service anywhere. I've bought a lot of items from etrailer for a couple years now. I have had great experiences with each and every order.
Exactly what I needed to add electric brakes on my Tow Dolly.
Flanges are listed as 1.75 inches but measure 1.6 inches. A few minute with Dremel
fixed it.
Good fit no problem mounting to axle! Works very well!
Perfect fit for old trailer retro
I received my parts and are in great condition. Customer service and support were excellent.
The parts were as expected and were installed after some minor fit up
Very helpful and part fit great and order was shipped when said. Will order more parts from you again. Thank You
good quality. havenotusedthem
Works fine
works as it should
Look just like it is pictured
Was plesaed with the quality and price.
Had the part in stock, shipped and delivered quickly!
Keep up the good work
Excellent Product
Flange is well constructed.
Great product, incredible service!!
Good product
Chuck
3/10/2025
Never had another thought about these flanges, as the trailer brakes performed flawlessly!