# 1
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
Customer service, response, shipping and ease of doing business are all top of class. The product is solid but kudos to the eTrailer staff for helping me out with a quality issue with one of the shackle assemblies. eTrailer has earned all my future business. It's great piece of mind to know they stand behind the products they sell.
Nice kit, red looks cool. Seems a little better than the one on Amazon though it is also supposed to be Dexter. There are a number of decent install videos but none of them show how tricky this upgrade can be. More guidance on proper setup and dealing with stubborn bolts would be nice. For, example none of the videos actually show how tough it can be to seat the bolts completely, that takes some serious work with a small sledgehammer and deep socket Dexter as a company is a bit of a disappointment. There are two different actual Dexter locations in my town and neither carried this kit or spare parts for it. Thank you etrailer for carrying spare parts and being more knowledgeable than the actual OEM. I believe the spare bolt/nut I ended up needing was actually a Lippert part but worked just fine. All in all, very happy with upgrade and etrailer.
# 2
U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
I purchased this kit for the standard 5' x 8' 2,000 lb. trailer from Lowes. I did an axle flip and added larger tires. This is the perfect kit for this trailer. It went on easy, and the bolts were slightly longer. Also the bolts in this kit were fine thread instead of course thread. Overall an improvemet over the factory hardware and I had no issues. Shipped in a timely manner and packaged well. I highly recommend this kit if you plan on flipping the axle or need a replacement.
Moved my axle below the leaf springs, works a lot better for my needs now. Paul helped me put an order together, got it shipped that day and delivered two days later. Quality parts and outstanding customer service.
# 3
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
These did not fit my 3500 lb axle. It has been very difficult determining the correct size U-Bolts for my axle. It appears etrailer does not carry the size I need.
It is exactly as described. It seems solid. I also ordered the springs, and they appear to be solid as well. I look forward to continuing to do business with etrailer due to quality parts AND great customer service from the likes of Shawnee and the crew. Thank you!!!
# 4
Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
My 20 year old trailer (that I use for my Lawn Business ) needed new axles and while shopping for parts I found these Equalizers I was impressed with the price. I received them a few days which was great since I needed my trailer back on the road quick The new parts installed perfectly It was nice that all the hardware was included. The old parts where severely worn so now the trailer rides great and I have the comfort of mind that my complete axle assembly is brand new I strongly recommend this product
Nice job "e-Trailer"; received this "heavy" order very promptly; did not expect it so quickly in view of how other retailers/ manufacturers/ on-line businesses are behind in fulfilling orders. Packages (3) came all intact, well packed and product received in great condition. The order included: > 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles (2) > U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles - 8" Long U-Bolts (2) > Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 10-1/8" Long Equalizers (2) > Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 6K (2) > Mounting Bolts and Hardware for 12" Brake Assemblies (2) > Bearing Buddy Bearing Protectors - Model 2441SS - Stainless Steel (Pair) (2) > Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal (4) > Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side. These items are being utilized in the total suspension replacement of a 10,000 gvwr tandem axle trailer. Good sized job for a DIY'er. I expect that it will give my JD 2038 tractor a smooth and safe ride as it is towed/ hauled down the highway. Thank you. I would/will strongly recommend to a friend/relative or associate. ( I'd take a picture of the "project", but there is a vicious rain storm occurring outside; perhaps one or two pics to follow at a later time).
# 5
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
My 6' x 10' landscape trailer was a homemade by a prior owner. While it was mostly constructed very well, the spring hangers were not correct. The spacing for the springs was also wrong, and it had very little fender clearance. There was also evidence that the spring U-bolts had contacted the frame on occasion. (I do not carry loads anywhere near the 3500# axle rating.) I added an extra set of holes on the front hangers in case the ride height proved to be too much, but I like the way it sits with the stock holes. I don't think I'll be utilizing the extra holes. This kit was just the ticket to increase the suspension travel and fender clearance on my landscape trailer. Now it "sits right"!
I am sorry but I can not remember names but I talked with two very helpful ladies and could not have been happier with their assistance. Thanks again, the trailer build is going great.
# 6
Dexter Trailer Springs Over-Under Conversion Kit
Our trailer was so low...that it could not make it up a low curb and some driveways - especially when fully loaded. Went with the Dexter axle flip kit. The Dexter bracket and base plate pieces are worth the extra $20-$30 compared to other similar kits - they make fitment easier, eliminate any guesswork on placement, and decrease installation time because of it. Took 2-3 relaxed pace hours for us to do single axle install. Tools required were ratchet/wrench set (13/16 deep socket worked for us for most of the bolts), cheater bar (for working those rusty bolts off), drill, angle grinder (cutter disc for oem u-bolts and leaf spring bolts that are rusted or welded in place, stripper disc for cleaning area around new bracket for welding) welder, floor jack and jack stands. We had to remove the leaf springs, as the wheel mount brackets would not fit through the openings. Was hoping we wouldn’t have to, but it was pretty simple to do. We jacked the trailer up. Removed the wheels. Removed the axle. Cleaned the axle area where new brackets go. Set the height and placement of the new Dexter brackets. We left the OEM brackets on the axle and placed the Dexter ones in the exact same position 180 degrees on the other side. Welded them on. Reinstalled leaf springs. Reinstalled axle, reinstalled wheels. Then voila! We added 6 full inches of height. Super awesome.
One order gets you the kit for only one axle, and realized this after my order arrived for my project on a two axle trailer. Seems obvious now but that wasn’t labeled & pictures were deceiving as I saw two axle trailers advertised. Hardware all seems to be in good shape but packaging quality is poor. Before opening my package I could see into my box with loose hardware rolling around. Thankfully no nuts fell out during shipping. In the future please tape around all seams or place in more secure packaging.
# 7
Torflex Lift Kit - Tandem Axle - 3-1/8" Lift
Prior to installing this kit, I was unable to remove my tires without first deflating them. The same went for reinstallation. The kit works perfect and was easy to install. I'd recommend it for anyone needing to raise their trailer.
My 28’ car trailer was dragging every time I pulled into a parking lot or gas station. I ordered & installed the lift kit & haven’t drug since! It was easy to install (about 3 hours for both sides) with no drilling or fabricating. Removing the old, rusty nuts & bolts was the worst of it. The kit came complete with new hardware, so it went together easily. The instructions were thorough & complete. Great product!!!
# 8
Dexter Trailer Springs Over-Under Conversion Kit
The lift worked out perfectly,I had the place where I bought the trailer install them because I didn't have a welder to weld the saddle mounts to the axle and that's a must for a safe installation,also I had the place where I bought the trailer do it because they had the capability to align the axle perfect to the trailer after the installation. The lift added approximately 5 inches to the trailer hight so I could install the off road wheels and tires.The lift didn't affect the handling of the trailer at all.
Jaime at ETrailer was extremely helpful and got my order sent up ups ground since I was having issues using a P.O. Box. My parts arrived quickly and fit perfectly. I installed them last week and my trailer looks so much better and won’t be scraping on my driveway anymore!
What our customers are saying:
"Thanks for the quick shipment and super communication. Products exactly as described. A pleasure to do business with."