Best Honda Element Bug Deflectors

The deflector itself is of good quality but the mounting hardware (plastic) sucks and caused me to engineer my own fasteners. I would NOT purchased from Weather Tech again and believe etrailer should stop selling their products… The provided (4) fasteners have what felt like plastic, very finely threaded, undersized screws. In order to install the fasteners you have to apply a significant amount of pressure to the screw head. Three of the four screws just slid into the fastener and did not enlarge the buried section of the fastener enough to secure the bug shield to the hood (to the point that the hood would not even latch because the bug shield was held on so loosely). I tried several other of my own fasteners with varied results. I finally found some screws that were about 2-3 times the diameter and had much more aggressive threads. I had to cut them down to size and file the ends smooth. When I applied pressure to these screws the fastener sunk to the correct depth and the screws were large enough to cause the buried portion to spread out and anchor the bug shield to the hood. Surprise! The hood now closed properly at this point and the shield felt like it was attached solidly. From start to finish I spent about two hours trying various fasteners. At one point I considered drilling new holes in the bug shield and using screws and washers to attach it, but I was so frustrated with the installation that I was strongly considering returning the product. I eventually put two and two together and figured out the issue was the provided incorrect size, plastic screws that weren't working. Once I replaced them with the thicker screw with larger threads it all came together.