Most Popular 13 - 17 Inch Tall for 2004 Ford F-150

I purchased both the Curt A16 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs - C16120, and Reese Pull Pin Lock Plates for 5th Wheel Trailer Hitches - Qty 4 - RP58093 for my F350 SD 4X4 Crew Cab Long Bed. I'm pulling a 30' Retro 5th. Wheel and at times I pull my tandem axle UTV Trailer (Double Trailers) . I already had the rails installed in my truck, this fit right in and I used the new Pins and Lock Plates for securing to truck. I have pulled all over from South Dakota and the Northwest. The Hitch has performed Flawlessly. No bucking, nor clunking. Very quiet and smooth ride. I would recommend this set up to anyone for convenience of Hook up and Disconnect, Excellent towing, quiet, and the security of the lock pins. I use Disc locks to prevent access for bolt cutters.

Click to Enlarge

I was fully expecting a hitch in excess of 100 pounds to show up in a destroyed box. This did not. They had taken the Time and effort to cover the box with an additional layer of cardboard and it must have had a million staples in it. It was almost comical, you will need a crowbar or large screwdriver to get it open. However, when I did finally get the package open I found a perfectly un scratched hitch with no missing parts. I have not pulled with the hitch yet but , it does look like it is going to perform great. I'm using this in a 2006 ram 2500 4x4 short bed pulling a 2015 forest river Salem and it allows 91 degrees of turning due to the clipped corners on the front cap of the trailer. I will be curious to see how long the rubber isolators last before needing replaced and if they are readily available. Also the curt sticker on the hitch was peeling off when I took it out of the box, would be nice to get that replaced.

Click to Enlarge

Truly happy with this product and can't wait to go to work! etrailer sent me everything I requested and the installer had no problems. Everything was packed well in shipping with no problems.

Click to Enlarge

2005 Dodge Quad Cab Dully , Cedar Creek 36 ckts 16k very nice hitch , shipped relay fast 3 days to east coast, easy to install : had rails from old hitch, it did come a LITTLE scratched up from shipping . one thing i wish it had more height / it does sit lower than old hitch buy 1 inch. haven't tried pulling yet / will up date latter . hope it pulls as good as it looks. now no problem for bigger trailer, i hope! maybe a toy hauler?

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I bought a new trailer recently that weighs 16k and I just didn't feel secure using my Reese pro series 16k to Haul with. So I started looking at various hitches. I've had 3 other fifth wheel hitches in the past. All of them have been 15 and 16k models. What I never liked was the latching system. I've even had a trailer come out of the hitch due to a poor latching hook up. There wasn't an good way to lock the hitch. Some of it was my fault and some was a poor design. When I saw the Curt Q20 had a latch on the handle and also was color coded I was hooked. This hitch satisfied my want list. It arrived 4 days after I ordered it and like other comments I've read it was full of heavy duty staples. It was double packaged. There had to be over 50 staples. It was defiantly packaged securely. After dimantaling the packing I finally got to the hitch. There were a few scratches on the hitch from all the staples but a bit of black touch up paint took care of that. After all the hitch is going to be used and get scrached by me anyways. Four bolts and it was together. It fit perfictly it my existing rails. By the way it's heavier than my other hitches. I wound be apprehensive to pull my new trailer. If your looking for a great hitch at a great price you can't go wrong.

Click to Enlarge

Unlike other reviews...I will say that my packages all arrived in perfect condition. (Boxes were all intact). Assembling the Q20 is a breeze and by all appearances this hitch certainly seems to be more than adequate for my needs. I haven't had a chance to actually use it yet...but from what I can tell, I certainly don't expect any issues. I like the way the hitch latches and unlatches, and that you can add a lock to prevent someone from opening the jaws while you are parked somewhere. I think the only thing I'll add is a lock in place of one of the pins...just to make it difficult for someone to remove and steal the hitch.

Click to Enlarge

I would give this hitch 5 stars but it was damaged when I got it. The handle was apparently dented when it was shipped so I had the choice of either sending sending back a 125 pound hitch or banging out a dent in the handle and getting the damn thing installed.

Excellent on all levels. Fast shipping via right company.

Click to Enlarge

I have towed with the Curt A20 for a few thousand miles. I really like this hitch. The visual hooked versus unkooked indicator is awesome. It operates flawlessly. I do get some chucking over bridge expansion joints. However, it seems like most people have this problem. On normal roads it pulls great.

Click to Enlarge

Hitch slid into existing rails after a very minor adjustment. Took my son and I about 25 minutes to assemble, torgue bolts and adjust rails in the bed of my truck. we have used it twice already and camper did not bang and pop like it did on old worn out receiver. The ordering process was also very smooth. Kelsey took the time to explain the differences in the hitches before I made my decision! I Would recommend both etrailer and this hitch if you are looking to change out!

Click to Enlarge

Click to Enlarge

I have ran a cheap competitor hitch for several years. A manufacturing defect (welded pivot pin) caused the hitch to fail and resulted in 18000$ damage to my truck and trailer. I chose the Curt 25000# hitch after much research and found it to be very well made and clearly shows when it is properly coupled. It is quiet and operates with minimal klunking and chunking going down the road. Overall I am very pleased.

Click to Enlarge

Mounted this hitch on my flatbed 3500 Ram and the hitch works flawlessly. Pull 44' tri-axle weighing in at 23,000# with ease. Very easy to use and understand, very easy to maintain.

Click to Enlarge