Most Popular Toy Hauler Door for 2001 GMC Sierra

Easy install, appears to be good quality.

The screen was very easy to install, although it is easier with two people due to the size. Excellent quality. I added velcro straps to the top for added ease in securing the rolled screen for loading and unloading when the entrance needs to be fully open. The screen fit perfectly in our opening, but the adjustment panels are super easy to use.

It leaves about an 1 1/2” gap at the bottom of the screen because the retractor needs to move that much to lock into place. It come with no mounting screws, and the instructions are somewhat vague. Also be aware that if you’re tailgate latch mechanism has an inside plate that pulls against the inside door frame the screen side channels will need to be moved a little over 1/4” back to allow clearance. I barely had enough room between the happyjac bed/couch lift framework and the doorframe for the latch pivot plate

Installation instructions are vague, had to Google for better directions. Still had to adjust instructions to fit it in. This screen wall does not reach all the way to the floor in our Toy Hauler, leaves a 1 1/2" gap at the floor.

It leaves about an 1 1/2” gap at the bottom of the screen because the retractor needs to move that much to lock into place. It come with no mounting screws, and the instructions are somewhat vague. Also be aware that if you’re tailgate latch mechanism has an inside plate that pulls against the inside door frame the screen side channels will need to be moved a little over 1/4” back to allow clearance. I barely had enough room between the happyjac bed/couch lift framework and the doorframe for the latch pivot plate

This is a classic example of a product designed manufactured and marketed by people that don’t use it themselves. The screen blows out of the track with slightest cross breeze or any other breeze. I threw your tracks away as they are useless. The only place these tracks would work is indoors at the RV Expo. The tracks I designed hold the screen in place. Now that I spent time rebuilding it it’s quite nice. Thank you for asking.

It leaves about an 1 1/2” gap at the bottom of the screen because the retractor needs to move that much to lock into place. It come with no mounting screws, and the instructions are somewhat vague. Also be aware that if you’re tailgate latch mechanism has an inside plate that pulls against the inside door frame the screen side channels will need to be moved a little over 1/4” back to allow clearance. I barely had enough room between the happyjac bed/couch lift framework and the doorframe for the latch pivot plate

This is a classic example of a product designed manufactured and marketed by people that don’t use it themselves. The screen blows out of the track with slightest cross breeze or any other breeze. I threw your tracks away as they are useless. The only place these tracks would work is indoors at the RV Expo. The tracks I designed hold the screen in place. Now that I spent time rebuilding it it’s quite nice. Thank you for asking.

This is a classic example of a product designed manufactured and marketed by people that don’t use it themselves. The screen blows out of the track with slightest cross breeze or any other breeze. I threw your tracks away as they are useless. The only place these tracks would work is indoors at the RV Expo. The tracks I designed hold the screen in place. Now that I spent time rebuilding it it’s quite nice. Thank you for asking.

Installation was straight forward. However big however, the screen stops about an inch above the floor. I measured the rails out perfect and the screen header is touching my roof. Another problem is the screen is kind of loose i can live with that but the stopping above the floor with a big gap sucks.

I think we will LOVE our new screen, it is installed but we just haven't used the camper yet since installing it. Easy to install! Cant wait to sit in the back of the toy hauler and let the breeze blow in and the bugs stay out!