2019 Ford F-150 Brake Controller

Features:

Wireless brake controller mounts on your trailer to keep your cab clutter-free. Keep towing simple and convenient with a handheld, Bluetooth remote control. Nothing installs in your vehicle, so you can tow with any truck that has a 7-way.

Installation Notes:

You need item ETBC7L ($94.83) to install your controller.

Features:

Wireless brake controller mounts on your trailer to keep your cab clutter-free. Keep towing simple and convenient with a handheld, Bluetooth remote control. Nothing installs in your vehicle, so you can tow with any truck that has a 7-way.

Installation Notes:

Features:

The Tekonsha P3 is a brake controller beloved for its reliability and useability. You're able to save your settings and multiple profiles. It's easy to install, and with the custom harness, it's plug-and-play.

Installation Notes:

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # 118283 is still recommended.

Features:

The Tekonsha P3 is a brake controller beloved for its reliability and useability. You're able to save your settings and multiple profiles. It's easy to install, and with the custom harness, it's plug-and-play.

Installation Notes:

Tech Tip:

Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.

Features:

This unique brake controller mounts on your trailer instead of in the cab so you can tow your trailer using any truck. You'll control your settings from the handy key fob remote.

Installation Notes:

You need item ETBC7L ($94.83) to install your controller.

Features:

This unique brake controller mounts on your trailer instead of in the cab so you can tow your trailer using any truck. You'll control your settings from the handy key fob remote.

Installation Notes:

Features:

The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.

Installation Notes:

Tech Tip:

Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.

Features:

The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.

Installation Notes:

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # 118283 is still recommended.

Features:

This proportional brake controller has simple controls and a digital display for diagnostic information. Includes 3 boost levels, a slide-bar manual override, built-in battery protection, automatic leveling, and continuous diagnostics.

Installation Notes:

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # 118283 is still recommended.

Features:

This proportional brake controller has simple controls and a digital display for diagnostic information. Includes 3 boost levels, a slide-bar manual override, built-in battery protection, automatic leveling, and continuous diagnostics.

Installation Notes:

Tech Tip:

Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.

Features:

The Tekonsha P2 is a classic brake controller you know you can rely on. It's easy to install, and with the custom harness, it's plug-and-play.

Installation Notes:

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # 118283 is still recommended.

Features:

The Tekonsha P2 is a classic brake controller you know you can rely on. It's easy to install, and with the custom harness, it's plug-and-play.

Installation Notes:

Tech Tip:

Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.

Features:

This time-delayed brake controller is designed to mount at any angle, even upside down. The controls are all up front for easy access, including a slide-bar manual override and a thumbwheel for braking output. LED indicator shows your braking status.

Installation Notes:

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # 118283 is still recommended.

Features:

This time-delayed brake controller is designed to mount at any angle, even upside down. The controls are all up front for easy access, including a slide-bar manual override and a thumbwheel for braking output. LED indicator shows your braking status.

Installation Notes:

Tech Tip:

Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.

Features:

This proportional brake controller is designed to keep towing simple. Includes an LED braking indicator, a slide-bar manual override, and a knob to adjust braking power. Mounts easily within a 90-degree vertical range.

Installation Notes:

Tech Tip:

Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.

Features:

This proportional brake controller is designed to keep towing simple. Includes an LED braking indicator, a slide-bar manual override, and a knob to adjust braking power. Mounts easily within a 90-degree vertical range.

Installation Notes:

Some models do have the brake (blue) and hot lead (orange or red) wires already ran from under the hood to the end of the driver's side frame rail. However, these wires are hard to access and additional wire will still be needed. Part # 118283 is still recommended.