Yes, the High Pointe Over the Range RV Microwave # HP74ZR has a two speed exhaust fan which will remove all smoke, steam, and odors out of the immediate cooking area, but it will not vent it outside. If you wanted to have the microwave be able to vent outside you'd need to fabricate an external duct and connect it to the microwave. view full answer...
When installing the LED Trailer Tail Light with License Plate Bracket part # 328-003-81LBM1 with a load resistor like the Putco LED Light Bulb Load-Resistor Kit part # DI34ZR, the load resistor will not get installed inside the actual light assembly. The load resistor just needs to be inline with the signal wire so a few inches behind the taillight will be just fine. Furthermore, the load resistors do get hot so they will need to be mounted in an area clear of any obstructions. view full answer...
Yes, there will be drilling into the frame with the included self tapping screws to install the JT's Strongarm kit part # LC191023 that you referenced. view full answer...
That is a good question and yes, even if your 2017 Keystone Avalanche is not pre-wired for a backup camera system, you can absolutely still install the Furrion backup camera:
- Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - 4.3" Screen # FOS43TASF
I have added a link below to the manual for the Vision S # FOS43TASF, and you would simply need to wire the camera to a 12 volt power source and then either the running lights to have an observation camera, or the reverse... view full answer...
Go To Results