Assuming you are in that 9-10" range you can use the Draw-Tite Ball Mount # 80248. This has a 9-3/4" rise and a gross towing weight of 3,500 lbs which would be perfect for your trailer. You will also need # C40002 for a 1-7/8" ball or # 63845 for a 2" ball.
Just to be sure, I'm going to run through the process to measure for rise/drop. The first thing you need to measure is the hitch height. With the tow vehicle parked on level ground, measure from the ground to the top of your hitch... view full answer...
Hi Thomas,
The Roadmaster Tow Dolly # RM-2050-1 requires a 2" hitch ball. Your Thor Omni XG32 was likely built on a Ford F-550 chassis so you should be able to use the Curt Trailer Hitch Receiver # C15845, but would need to doublecheck that you have this chassis and confirm the model year, as well as needing to measure 6" down from the frame to see if the receiver tube is going to clear the rear fascia.
For the ball mount I recommend using a reducer # 325-GH-007 to get the opening size... view full answer...
Go To Results