Hey Scott, for your 2014 Ram CV we actually have a complete 7-way kit that has a reverse light circuit as well as pre-wiring for trailer brakes that you'd need to wire a brake controller like the very popular # 90195 to with the part # 22121. Do you have a brake controller already or do you need one as well? view full answer...
Hey Greg,
Great choice with the controller, but there is not a plug-in on your 2015 Ram CV to use the Tekonsha Prodigy P3 Trailer Brake Controller # 90195.
This is a hardwired unit, and you'll need a working 7-way for that. I'm not sure if you have that on your CV, but if not, to get one you'd need to install a 4-way, part # 118534, and 7-way included in the Universal Installation Kit for Trailer Brake Controller # ETBC7. view full answer...
Most likely yes, you can use weight distribution on your 2015 Ram CV. However, you will need to check the owners manual of your vehicle to make sure your vehicle is rated for weight distribution. There also will be a sticker on your hitch that lists this info as well.
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of... view full answer...
The kit you'll need to install a brake controller in your 2015 Ram CV is the part # ETBC7 which ends up giving you both a 4-way and 7-way at the rear of your truck. So based on that you'd be good. You'd need to start with just a 4-way though which for that you'd want the part # 119250KIT.
From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached... view full answer...
Go To Results