Expert Answers about Cruiser RV
- What is Overall Width of CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks # CE48870
- The overall width of the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks # CE48870 is 54 inches and that's measured from the outsides of the tires. Since the bunks are adjustable in width and angle it will still work great with your Newport Vessels 11.9 Baja.
view full answer... - Similar Trailer License Plate Light to LP81BBP
- We have lights like the part # LPL21CB, or the # M296XC, # LPL81C1B as well as others at the attached link on this page.
view full answer... - Trailer Coupler Solution for 4 inch Wide Trailer Tongue
- I have a solution for you that would work, but we don't have a traditional-style coupler that will fit over your 4 inch trailer tongue. The straight tongue trailer couplers we offer fit up to 3 inch trailer tongues.
You could use an adjustable channel coupler that will weld to the front of your trailer tongue. For a coupler that fits a 2 inch hitch ball, a great option is the Pro Series Adjustable Channel Coupler with Low Latch # PSA200S0303. This coupler offers an 8,000 pound weight capacity....
view full answer... - Replacement RV Radio or Parts for Single-DIN installation
- Unfortunately individual parts are not avaiable for your Furrion RV Radio. If you need to replace your current radio a single DIN fit would be the Drive # 324-000148 2-zone radio the plays from radio stations, CDs, DVDs, and AUX devices connected via Bluetooth, Aux cord, and USB. The Drive app lets you change radio controls from your smart phone.
view full answer... - Thule Force XT Cargo Box Fit on 53 Inch Thule WingBars With Yakima HighSpeed & WheelHouse Bike Rack
- For the 53 inch Thule WingBars # TH711420, in order to be able to open the Force XT cargo box when it is on the roof of your Audi A7 with the Yakima HighSpeed Roof Bike Rack # Y02115 and Yakima WheelHouse Bike Wheel Carrier # Y02108, you will need the narrower Thule Force XT Sport Rooftop Cargo Box # TH6356B.
The reason for that is when taking into account the combined widths of both racks and the Thule Force XT L as well as that there needs to be some space between the racks and cargo...
view full answer... - Replacement Roof Vent Cover
- We offer two replacement covers for the Ventline AS-13-M-V101. We have a white cover # BV0554-01 and a smoked color # BV0554-03.
view full answer... - Recommended Base Plate Kit For 2018 Jeep Wrangler JK Freedom Edition
- As long as your 2018 Jeep Wrangler Oscar Mike Edition (Freedom Edition) does not have the American Expedition vehicles bumper the available base plates are the Roadmaster Direct Connect # 1444-3, Roadmaster Crossbar Style # 1444-1, and the Demco Tabless # DM34FR.
If your Jeep JK does have the American Expedition vehicles bumper you will need to go with the # DM34FR.
My recommendation is to go ahead and go with the Demco # DM34FR as it will work with either bumper option, and will allow...
view full answer... - Parts Needed To Add 7-way Connector And Trailer Brake Controller To 2021 Toyota Sienna
- I would be happy to recommend everything you will need to add a 7-way connector and trailer brake controller to your new 2021 Toyota Sienna.
First you will need to have a 4-way connector installed of which I recommend the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236.
With a 4-way connector installed there are two different 7-way connector options.
The first is the # ETBC7 with a traditional trailer brake controller like the Tekonsha Prodigy P3 # 90195.
The...
view full answer... - Determining Correct Torflex Lift Kit For 2002 Coachmen Catalina 24 5th Wheel Trailer
- Since the GVWR of your 2002 Coachman Catalina 24 5th wheel is 11500lbs your trailer have the # 11 Torflex 4100-6000lb axles or # 12 5000-7200lb axles so I recommend double checking the information on your axle tag to confirm the model number of your axles.
If you have the # 11 axles you will need the Torflex Lift Kit - Tandem Axle - 2-7/8" Lift # K71-724-02, and if you have the # 12 axles you will need the # K71-725-02 instead as long as your axles do not have the 3" high lift brackets...
view full answer... - Can I use the Bulldog Gooseneck Coupler without using the Side Holes?
- Yes, you can use the Bulldoge Gooseneck Coupler, # BD0287610300, with just the set screws on your trailer. The pre-cut holes on this coupler are specifically for Bulldog's outer tube assembly, # BD0233100300, that can be welded to your trailer in place of your existing tube, but it is not a requirement to use the inner tube with your existing setup. Bulldog created this feature for an added safety benefit.
In fact, you wouldn't want to line up your set screws with the existing holes because...
view full answer... - Best Trailer Tire in Size ST205/75-14 Load Range D
- The best tire for the size ST205/75-14 in a Load Range D is the Kenda Karrier part # AM10235 which is a load range D, a speed rating of 81 mph, and a great 5-year warranty. You can get these without breaking the bank and our customers have rated them 5 out of 5 stars. I think they will be your best solution.
view full answer... - Does Pop and Lock Tailgate Lock PAL1300 Fit 2010 Chevy Silverado Short Bed
- Yes the Pop and Tailgate Lock part # PAL1300 does fit your 2010 Chevy Silverado Short Bed.
view full answer... - Can 7-Way Be Added to Freightliner Semi Truck
- We can help with a basic 7-way and wiring but we do not have anything that's going to actuate ABS brakes.
You can hardwire in a 7-Way, # HM47210 though. For this 7-Way the white wire is ground, yellow is left turn signal and brake lights, green is right turn signal and brake lights, brown is the tail light wire, red is auxiliary power, blue is output to electric brakes, and purple is reverse lights.
If the turn signals and brake lights are not combined on the same circuits then instead...
view full answer... - Replacement LP Gas Detector
- The Atwood 31013 is no longer made. The best choice for replacement is the RVCO # RS34FR which mounts flush against the wall, and the overall measurements are 4-1/4" square, and it sticks out 1/2" from the wall.
Works with 2-wire installations.
view full answer... - RV Fresh Water Tank Drain Valve Options
- While we do have drain valves for your RV's fresh water tank, you do need to have access to the tank in order to install them; unfortunately there isn't an option for a valve that can be installed without some type of access. If you can find a way to do so, there are two options, depending on your tank's outlet fittings:
- 3/8" or 1/2" Barb: Valterra Universal Barbed Drain Valve for RVs # A01-2025VP
- 3/8" and 1/2" MPT (threaded): Valterra Universal Threaded Drain Valve for RVs # A01-2026BKVP...
view full answer... - Torklift Replacement Steps for Grand Design Reflection 5th Wheel Including 303RLS
- The Torklift # TLA8003 (3 Steps) will fit for your trailer. These are intended for a mounting bracket measuring 27-1/2" and an entry height of 25-1/2" to 36". Alternatively, the Torklift # TLA8004 (4 Steps) is designed for an entry height of 32-1/2" to 44" and will extend out further.
If you have trouble on steps I would recommend the 4-step model, just know that they extend out further, otherwise the 3-step model is fine.
Also check out the Torklift # TLA7621 Hand rail. 4 steps is...
view full answer... - Recommended Trailer Hitch Receiver And Bike Rack For 2021 Mazda 3 Hatchback
- Your 2021 Mazda 3 hatchback can certainly have a hitch-mounted bike rack. For a trailer hitch receiver (if you do not have one) you will want to go with Curt 1-1/4" hitch receiver # C98BR. The tongue weight capacity for this receiver is 200lbs which you do not want to exceed. For this receiver you will be limited to a 2-bike carrier due to it being a Class 1 hitch.
In regard to the bike rack, I really like the Swagman Trailhead 2 Bike Rack # S63360. This will fit your Class 1 receiver...
view full answer... - Recommended Ladder Rack For 2016 Nissan Frontier Crew Cab With Utili-Track System
- I highly recommend looking into the Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility Tracks # Y01151-5868. This is an excellent ladder rack that is designed to install onto the factory utility track on your 2016 Nissan Frontier. It has an impressive weight capacity of 500lbs on-road and 300lbs off-road. The rack adjusts from 19" to 30" tall to clear any bed-mounted cargo. Built-in locks secure the system to your truck bed.
The top of the crossbars have built-in channels...
view full answer... - Do the Konig Standard Snow Tire Chains Come in Sets of 2 or 4
- Tire chains are typically solid in pairs, so you've got the required chains for an axle. The Konig Standard Snow Tire Chains - Diamond Pattern - D Link - XB16 - Size 245 Item # TH01571245 are sold in pairs, so if you wanted to have them for all 4 tires you'd need to order 2 sets of these. These are a great choice though because the diamond D-link pattern help provide much better traction than traditional ladder style chains.
I've linked a review video of these for you to check out as well.
view full answer... - Recommended Towing Mirrors for 2019 Ford Ranger
- I recommend using the K-Source Universal Dual Lens Towing Mirrors - Clip On - Pair # KS3990, which are a sturdy, clip-on mirror set that will help give you a better view of what's going on behind you while you're towing. These mirrors have ratcheting straps to help give you a more secure connection with the clips, so they're not going to vibrate as much as other universal mirrors might. There isn't a custom fit slip on set of mirrors available for the 2019 Ford Ranger currently, but these...
view full answer...
Go To Results