ARB Vehicle Suspension
- ARB88SW
- Lift Kit
- Off-Road/Performance
- ARB
- Front Axle Suspension Enhancement
- Rear Axle Suspension Enhancement
- Light Duty
- Suspension Only
Want better ride quality and a more confident stance? This MT64 kit gives your Tacoma 2" of front lift and upgraded struts and shocks for smoother handling and improved control—no cutting, no guesswork.
Highlights
- Front Lift Without Extra Weight: Raises the front 2" for better stance and clearance on stock-weight builds.
- Matched to Your Build: Springs, struts, and shocks are selected for your Tacoma's factory load.
- Keeps Rear Height Stock: No lift out back—perfect if you don't carry gear or run rear upgrades.
- MT64 Struts and Shocks: Built to stay firm under load and smooth over rough terrain.
- Direct Fit, Factory Mounts: Installs without cutting or weldingeverything bolts up clean.
- Tested Where It Matters: Proven in Australia on trucks that carry gear and go the distance.
Features to Know About
Want Lift Without the Load?
This kit is built for Tacomas that haven't added a bumper or winch but still want more clearance and better ride quality. With 2" of front lift and no rear change, it keeps the stance practical and the setup simple.
Built for Hard Miles
MT64 struts and shocks are made for trucks that don't get babied. The oversized 64mm bore holds more oil to stay cool on long trips, and the aluminum body sheds heat fast. You get solid control through rough terrain without getting bounced around on pavement. They feel firm when you need it, smooth when you don't.
Install It and Drive
This system bolts into factory mounts and is matched to your truck's stock weight and geometry. No cutting, no guesswork—just a clean, well-balanced suspension upgrade that improves ride and handling right away.
Drives Better, Without Overbuilding
You'll feel the difference right away. The ride is smoother on pavement, the truck feels more composed on uneven ground, and the stance looks better without throwing off the balance. It's the suspension upgrade your Tacoma should've had from the factory.
Restores Suspension Geometry
The upper control arms keep your suspension angles where they should be after a lift, improving steering response and protecting other suspension parts from excess wear.
Durable, Low-Maintenance Design
Forged arms with grease-free bushings and high-strength ball joints provide long-lasting performance, better handling, and more even tire wear on and off the road.
Specs:
Ride Height & Load:
- Front Suspension:
- Lift: 2"
- Load Rating: stock build
- Rear Suspension:
- Lift: 0"
- Load Rating: stock build
Shock & Spring Details:
- Design: Monotube
- Shock Type: MT64
- Strut Type: MT64
- Coil Spring Rate: 588 lbf/in
Included Components:
- 4007 Front coil spring set (1 pair)
- MT64901007 Front struts MT64 (2)
- MT64601013R MT64 Shock Absorber Rear Right (1)
- MT64601013L MT64 Shock Absorber Rear Left (1)
- UCA0005 Upper Control Arms (1 pair)
1106K Old Man Emu MT64 Suspension Lift Kit for Tacomas - 2" Lift - 0 lb Load - Off-Road
UCA0005 ARB Old Man Emu Front Upper Control Arms - UCA - Lifted Suspension - Off-Road- 50 mm
Installation Details 
This Product Fits The Following Vehicles
WARNING: This product contains chemicals known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.