Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
72" Long x 19-1/4" wide x 13-1/2" deep; 8.6 cubic feet; 2" height above bed rails; standard box with foam filled lid and paddle lift handles; low-profile top; aluminum construction
Features:
Specs:
You will enjoy how much the sleek look of UWS's Low Profile Series complements the latest designs of today's trucks. The toolbox sits just 2" above the truck bed rails instead of the standard 4," providing a better view out the back window for maneuvering or keeping an eye on your load. The insulated, beveled, single lid opens fully to 90 degrees with the help of two super-duty lift cylinders, which raise the lid and hold it open as you load and unload your gear. Smaller items and tools can be stored conveniently on the divided, sliding tray, ensuring they are readily available for use.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part number UWS00363. This is the UWS truck bed toolbox. It is a crossover style in the low profile series. This crossover, saddle style toolbox will hang from your truck bed rails behind the cab. It is a low profile design which makes it easy to see out the back window. It is aluminum construction.
It is made of a .063 aluminum tread plate. It has fully welded seams which are guaranteed not to rust. It does have the heavy duty paddle lifts, stainless steel latches on each side. It has a stainless steel lock, with two keys, on the drivers side. On the inside of this toolbox, one of the nice features, it has a connecting rod enclosure and what that does is there's a connecting rod that connects this handle to this handle so you can open the lid from either side.
This connecting rod doesn't get damaged from any of the content in your toolbox they put a nice aluminum enclosure around it to protect it from getting bent or jammed. The lid on this has a beveled lid. It has a patented, foam filled insulation which will give protection from the elements. It is also structural foam which will reinforce the shape and strength of the lid. The whole inside of the lid there is a dust barrier which will help protect the contents on the inside of the toolbox from the outside elements.
On each side is a heavy duty gas cylinders which will help lift the lid and hold it open a full 90 degrees. As you can see when I open it pretty much the gas cylinders will do all the lifting. It also has a piano hinge that runs the full length of the lid. It gives you a nice stability when opening and closing the lid. On the inside they do have a divided sliding tray for tools or any small items.
It also includes the J bolt mounting hardware. This toolbox is made in the USA. I do want to give you a few dimensions on it. The overall length on this one it'll be 72 inches long. The overall width is 19 1/4 inches wide and the overall height is 13 1/2 inches. Once you close this lid that will add one inch to those dimensions. The inside capacity is 8 cubic feet of usable space and again its a low profile series. That basically means it will sit two inches above your truck bed rails. The lock does include two keys. It does come with a one year warranty. That should do it for review on part number UWS00363.
Average Customer Rating: 4.8 out of 5 stars (28 Customer Reviews)
72" Long x 19-1/4" wide x 13-1/2" deep; 8.6 cubic feet; 2" height above bed rails; standard box with foam filled lid and paddle lift handles; low-profile top; aluminum construction
After 2 weeks I finally got my toolbox this is good for a 2001 Ford ranger stepside it doesn't say it would fit but I measured it before I bought it had one little ding in the corner but I touched it up with spray paint overall it's an excellent toolbox and it fit perfectly this is originally for a Chevy S10 but I measured it and it fits good I would recommend this to anyone who owns a Ford ranger stepside! Check out the pictures you can see how well it fits! It is hard to find a toolbox that fits a Ford ranger stepside I used to work in the Marine Corps parts department in the motor pool so I know how to measure parts at first they said this wouldn't fit my truck but I told them I measured it!
Love my toolbox!! I wouldn’t trade for anything. I was a little expensive but I needed it. Thanks a bunch
My UWS Crossover tool box fit great. Only minutes to install. Looks great and needed on my 05 Ford Ranger single cab.
great box much better than one from tractor supply and other places very solid construction you can feel the difference i like it
I've had bed box for almost a year now. So far so good. The finish looks as good as the day I installed the box, which by the way was a snap to install. I'm very happy with this product and glad I didn't go for one of the less expensive products like a few of my buddies did. Most of them have constant problems with their bed boxes. IE: hinges freezing up latch problems and most of all the finishes that aren't holding up.
The tool box works great. Works for what we needed and is low profile.
I've had this tool box for about a year. Its held up well without issue. This replaced a 9 year old tool box from Lowes that cracked at the bed support. So far so good on this one. The locking and opening mechanism works great and is covered so things dont bind it up. The only strange thing is that after a windy snow storm there was snow inside the tool box and I hadn't driven anywhere.
I was so happy to get this for my son. The only one i could find that would fit his ranger at the time. he uses it every day and it works great after one year. packaging , no scratches, and installed so easy that i went and bought me one. would recommend. sorry not much for technology or i would have added photos.
When I purchased the toolbox I forgot to mention that I have a bed liner in my vehicle. Therefore I had to put a 3/4 inch spacer on the top bed rails so the bottom of the toolbox would clear the bed liner over the wheel wells and fuel tank spout. Other then that I really have enjoyed the toolbox and have gotten many compliments as well.
Been happy with my purchase. I gave it 4/5 stars because it arrived with a dent on the lid that I was able to remove with a rubber mallet and a 2x4. The metal inside reflects poor workmanship. There are some sharp edges near the latch mechanism that I discovered firsthand after reaching in there. Aside from those issues it has functioned well and I find the dual lid release latches are convenient.
Fast and friendly service.
Awesome package, looks great, fits perfect. Delivery time excellent
The truck box is a good looking truck box but that’s about all the good I can say about it. The striker for the latch continuously came loose causing the lid not to latch completely and the top to come open going down the road. I fixed this by putting loctite on the nuts holding the striker in place. The gaskets along the lid have completely turned loose and are no longer there. The keys never worked from the first day. Overall not very satisfied with the quality of the box for the price.
Here is a picture of the tool box I ordered, installed on my truck.
I highly recommend etrailer for any trailer or truck parts. I have never worked with anyone that was as knowledgeable and helpful. The process was flawless. Further, after I made my order, they followed up and let me know several times how the order and shipment was progressing.
Toolbox came as advertised. Perfect fit in truck bed. Sturdy and well built. Easy to install. Exactly what I was expecting
Top of the line service and product. Very happy with entire transaction. One year later box still looks and performs like new. Thanks
Box fit great. Installed in minutes with no drilling holes in truck.The black finish matched truck perfectly.I like the lid that raises automatic but stops before hitting the cab of the truck.
nice box looks like in was made for the truck, only thing the tray sliding back and forth but a piece of tape fix that, also light enough to get in and out by myself
Good looking toolbox. Sturdy and good quality.
It was delivered just like you said it was on time, it was packaged very well and the product came in great condition perfect.
Use it daily, no problems at all.
Great service..quick delivery & exactly what I wanted for my new truck!
Everything fit as advertised . This is a good heavy duty well built product.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.