To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Getting to your gear doesn’t have to be a two-handed job. The PowertraxPRO MX opens and closes with the touch of a button on the included wireless key fob. The sealed ball-bearing rollers glide the 1" thick aluminum slats smoothly along the rails without needing lubrication, and the electromagnetic brake lets you stop and lock the cover at any point. Whether you’re loading supplies or keeping long items secure, the powered retraction gives you quick, controlled access to your bed in seconds.


When the cover is closed and the tailgate locked, your gear is protected behind 1" thick aluminum panels that resist impact and tampering. There are no hinges or joints to pry up, and the matte black finish is tough enough to handle years of weather and heavy use. The cover supports up to 500 lbs of evenly distributed weight and holds strong under snow or debris. It’s designed to keep your cargo safe from both theft and the elements.



Rain, snow, and dust stay out thanks to the full perimeter sealing system. Automotive-grade weather stripping along the bulkhead and foam seals on the side rails keep moisture from creeping in, while the overlapping tailgate edge blocks runoff and debris. Water that collects around the canister drains out through two built-in tubes, helping keep the cover and bed dry after storms or washes.


The canister at the front of the bed stores the cover neatly when retracted without taking up much room. Its angled bottom design leaves extra space underneath for smaller gear, and the spiral track system keeps the slats from rubbing against each other to prevent wear. When closed, the cover sits just 1" above the bed rails for a streamlined, flush appearance that looks factory-fit.




A bright LED light on the canister makes it easy to find tools or bags at night. Controlled by the same key fob, it turns on when you need it and automatically shuts off after 3–5 minutes so it won’t drain your battery. It’s a small detail that makes a big difference when you’re working late or setting up camp after dark.



Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's up everybody. It's AJ with etrailer.com. Today, we'll be checking out the PowerMax Pro hard tonneau cover. It's gonna be powered by your vehicle. So you can see, I just have this remote, open it all away or close it wherever I need it to be. You can even stop along the way, wherever you need it to be.
It's a really nice hard tonneau cover that you don't have to worry about pulling a strap to either open it it or close it. It's all automated. Let's check it out. It's a hard tonneau cover that's a black mat aluminum. So it's nice and sturdy.
You don't have to worry about it getting weighed down. If you want to set something up there, it's got a weight capacity of 500 pounds. This is going to be an inch up off the rails here. So it is pretty low design. It's pretty low profile.
I like it compare it to other tonneau covers 'cause you have other options like the soft tonneau cover which has the bars that go, there's about usually three of them in the vent. And then if you want to go set something up there that wasn't supported, it would sink down into that soft cover, not to mention rain or snow that collects there. And over time that's gonna bend that down and you're gonna have leaking issues. Another thing with tri-fold design, is another option you can have, and those are great. But as you pull them up, only in those three positions, kinda is problematic to where, you never know what you're gonna carry down there or how much of the cover you went out.
So if you want to stop it like there, you can't do that. Maybe you have an extended load in there and you want to stick out the end, you couldn't do that with a tri-fold. You have to do a very specific spot. So this one's nice because it stops wherever you need it to and you don't lose any back window access. With the tri-fold, sometimes you gonna fold those up against the back window, but then that blocks that whole window. The only thing I would say is difficult with this one is that it's got that canister on the inside. So it does take up a little bit of your vent space but there is space underneath, the slide in cargo, for that storage. The remote you're gonna use is got three buttons. It's pretty easy. The O is for open. So that means it's gonna retract your tonneau cover into the canister and then close is gonna bring it back and close up your vent. And there is one more button on there and I'll show you in just a second. This one is gonna be the light, and it's built in so you can see underneath by the canister. Turns on that light, which would be great for if you're loading up at the end of the day, at the job site, it's starting to get dark, you need to see where you're throwing stuff. Or in the morning when it's still not completely bright yet and you just need to find something that's up there, you don't have to climb up there with a flashlight and try and find it. You got two drainage tubes on the bottom of the canister, which is nice 'cause that was one of the things I was concerned about. If you have this automatic tonneau cover, you wanna keep it nice. So what happens if it rains on there, you get snow on there and you go to retract it and it brings that into the canister, what's gonna happen Well, it's got those tubes built in. So when it does melt or the water does get in there, it's gonna go right outside the truck. Now with it being a power tonneau cover, that means it's gonna have a little bit more of an in-depth install. It means you're gonna have to tap in the wiring on your vehicle. There's a step by step instructions, they help you do that. It's not that bigger deal. Now make sure you use the fit guide to get the right tonneau cover for you too, because there's a lot of differences with installing this. For instance, on this one, it actually has a mount for the truck that it's gonna use to mount it on top there. Your truck might not have that track so you might install it a little bit differently, but all the instructions are there. So just make sure you use that fit guide to get the right one for the right truck. Looking inside the truck, it's got a ball bearing grease. So they stay in that truck and allows that cover to slide very evenly. So you don't have to worry about getting bombed up or anything. When it comes up out of that canister, it's always gonna stay on that truck. And since they're grease, it's always gonna move smooth. If you look at the existing truck in there you can see the tie down points. Now the clamps do go into that truck, so you can't slide anything in from the end once the cover is installed. However, you can still move these back and forth if they're in the middle. You see like these are right here, you can still use these tie down points to move in between these clamps. So it doesn't rule them unnecessary. Overall, I like the tonneau cover. It's nice that it's automated. You definitely don't have to reach in there and grab a strap to pull it all the way out or fight it on the way back. Sometimes those covers that slide, that are manual, get stuck and it's kind of an issue to walk all the way back there or all the way back here. Even the tri-fold ones sometime have clamps, that you're gonna have to hit here to pull it out. And you're still doing that on your own. It's nice that you can just use this remote, get it to retract or put it away super easily. And then when you shut your tailgate, now, everything is sealed up inside, your tools and everything are protected and nobody can mess it when you're not around. I think that does it. Thanks for hanging out. I hope that helped..
Ratings & Reviews

Gary
9/9/2025
Still working great

Todd
9/2/2024
Leaks, slow opening and closing.Would not purchase again
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Kate F.
11/19/2025
I see that you sent pictures to Cody about this issue and it is being resolved. If you need anything from my end Michael, just say the word =)