Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2002 Lexus RX 300
We'll connect you with nearby partnered installers who know this exact setup.
Access Original Soft, Roll-Up Tonneau Cover
Part Number: A58VR
In Stock
$560.15
Retail:$659.00
You Save: $98.85
2002 Lexus RX 300
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (72)
- Q & A (0)
- Photos
Access Tonneau Cover - A58VR
Highlights
- Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
- Keeps Gear Dry: Element weather seal and vinyl flap block rain, snow, and dirt.
- Full Bed Access: Rolls up in seconds and straps securely behind the cab.
- Hard Cover Keeps Everything Out: Dual AutoLatch II locks secure cargo when tailgate is locked.
- Better Gas Mileage: Aerodynamic shape reduces drag by up to 10%.
- Built to Last: UV-resistant vinyl and rust-proof aluminum rails handle any weather.
Features to know about
Full Bed Access: Roll-Up Design
You don’t have to remove the cover when you need to haul big loads. The Access Original rolls up in seconds and secures neatly behind the cab with durable nylon straps and clips. Since it mounts inside the bed rails, you keep full use of your stake pockets and tie-downs for racks or anchors. The Slantback design finishes it off with a clean, streamlined look that stays 1-1/2" above the bed.
Year-Round Cargo Protection: Double-Coated, Reinforced Vinyl
Hot sun, heavy rain, or freezing temps—this cover handles them all. The UV-blocking vinyl keeps its shape and color, staying flexible down to -40°F without shrinking or cracking. An Element weather seal behind the cab and a reinforced vinyl flap at the tailgate help block out rain, snow, and dirt, so your gear stays clean and protected no matter the season.
Set It Tight: XT-Dial Tension Adjuster
Loose fabric can flap and wear out over time. The XT-Dial easy-grip adjuster lets you fine-tune the tension in seconds, no tools needed. Just turn the dial at the front of the bed to keep the cover pulled tight and smooth through heat or cold.
Secure and Simple: AutoLatch II Dual Locking System
Once it’s closed, the AutoLatch II automatically locks on both sides for solid security. Just pull the release cord for quick, one-hand operation when you’re ready to open it. Pair it with a locking tailgate for even more protection—no hassle, no extra steps.
Built to Last: Aluminum Rails and Tight Bite Clamps
The black powder-coated aluminum rails and bows resist rust and support the cover without adding bulk. Six aircraft-grade aluminum Tight Bite clamps grip the side rails with notched teeth for a firm hold, keeping everything in place. The setup leaves room for ladder racks or bed accessories, combining strength, function, and easy use in one durable design.
Specs
Specifications
- Sits above truck box: 1-1/2"
- Material: Double coated, reinforced UV-blocking vinyl
- Temperature flexibility: Down to -40°F
- Rail material: Black powder coated aluminum
- Clamp type: Tight Bite clamps (6 aircraft-grade aluminum clamps)
- Locking system: AutoLatch II dual locking system (2 locks)
- Tension adjuster: XT-Dial easy-grip tension adjuster
- Weather seal: Element weather seal behind cab
- Tailgate flap: Reinforced vinyl flap at tailgate
- Mounting style: Inside bed rails (standard profile)
- Rack compatibility: Rack compatible (leaves side rails free for stake pocket and bed rail accessories)
- Operation: Rolls up in seconds; one-hand release
- Origin: Made in the USA
- Warranty: 5-Year limited warranty
17029 Agri-Cover Inc. (ACI) Original Rollup Truck Bed Cover
This Product Fits The Following Vehicles
- 2020 - 2028 Jeep Gladiator with Trail Rail system
Ratings & Reviews
4.8
72 reviews
by:
Jennifer
10/26/2025
I’m very pleased with the cover. The clips used to attach the rails of the cover to the truck are frustrating. On my truck the rails on the cover need to be about an inch wider. It was difficult to keep the clips in place when tightening them down. You need two people: one to tighten them and one to hold them in place. Of course my truck is 23 years old so I wouldn’t expect a redesign, I just wanted to give an honest opinion. And it is watertight which I’m very happy about.
by:
Christopher
10/07/2026
Great fit, and good instructional video. I had some issues with not receiving the necessary hardware to install, however Alex T helped me resolve this issue. The cover looks great on my 94 C1500 extended cab stepside.
by:
Rick
12/05/2024
2019
GMC
Canyon
Fits great and looks great!!
Rick
12/6/2025
Great so very nice cover.
by:
Joel
05/09/2026
This is the second Access Original Soft Roll up tonneau cover I've owned and installed myself. Great quality and the installation on the new Rangers was straight forward.
by:
William
02/17/2025
2024
Ford
F-350 Super Duty
The product seems solid but it was damaged during shipping. Working it out with eteailer to see how smooth it's resolved. Will report back
Heather A.
2/19/2025
I can see you are in good hands. Let me know if you need my help at all with the resolution. I am here too.
William
2/19/2026
Works great. Update to original review...Customer service was great. They sent a new rail after reviewing the minor damages to the original shipment.
by:
Robert
11/09/2023
"I actually installed this cover on my 1992 Chevrolet Silverado step-side yesterday and it turned out great! I actually installed it without taking out the plastic bed liner. I'm really happy with the fit and look of this Access cover." and "As you can see in the photos, I did a slight mod to the bed liner where the rails bolt up in order to keep the protection of the bed liner and the tonneau cover fit snug as you can see."
by:
Adam
05/23/2025
I can't wait!
This was the old truck and setup... see attached.
This is after 5 years of regular abuse lol. Its a setup that turned a lot of heads in the field. And the new one will do the same.
Talk soon!
This was the old truck and setup... see attached.
This is after 5 years of regular abuse lol. Its a setup that turned a lot of heads in the field. And the new one will do the same.
Talk soon!
Brooke M.
5/27/2025
Looks awesome--definitely a head-turner! Did you kind of piece together the set up as went or was this the plan the whole time? It really looks like you got a spot for any and everything!
by:
Joe B.
06/12/2023
2003
Toyota
Tundra
Item #834532004676 fits my 2003 Toyota Tundra Stepside nicely. You do have to drill holes for the side rail screws, and the installation is moderately difficult due to the curvature of the sides of the bed. There are some rather rough relief slots cut into the rails to allow the extrusion to bend and match the contour of the sides. The instructions are a little sketchy on how to line up the screw holes so that you're hitting metal correctly under the bedrail caps, so I took my caps off and did my drilling, then put the caps back on.
by:
Mo
01/27/2021
2018
Ford
F-150
Excellent overall. The ordering was easy on line to navigate and pick the exact cover for my vehicle. The shipment was on time with easy access to monitor the status. And the installation was not a problem. Had a bit of trouble with the front end installation but got it figured out. I found UTube installation video much more useful than the hard copy instruction. The product fit just fine and looks great.
by:
Dexter
04/30/2024
Truck bed cover is great even after a year. No signs of fading or anything. Keeps it shape and works like it should. When I first got it I said to myself, hope it will last me at lease five years under our blazing sun here in Hawaii. And it seems it will. It also cleans up well, when I wash it's top, dirt wipes right off. The best part is, the cover makes my truck look great. Big Mahalo.
Dexter
5/6/2025
Yeah Hi Patrick, Yes, my cover is still in good working order. One of my strap buckle warped other then that, its done good.
by:
Robert
08/06/2026
2026
Ford
F-350 Super Duty
One of the screws needed to be tightened. The alcohol pad was dried up.
by:
David
04/08/2025
I love it! So easy to install and very tight.
Gwendolyn Y.
4/10/2025
Your truck looks great, David! Love that color :)
by:
Joseph
09/18/2025
I have had Access roll up covers on several of my trucks over the years and they hold up very well with proper care. My only criticism is that the directions are not written very well and lead to some confusion. Luckily for me, I installed a few of them in the past, but this could cause some frustration for someone installing one for the first time.
by:
Wayne
05/17/2026
Fits right! Just what I was looking for
by:
Chris
03/31/2026
Looks great 1 year later!
by:
Mark
09/20/2025
Product arrived early. Instructions were clear and the top was way to install. Looks great on my Honda Ridgeline
by:
David
04/08/2025
2008
honda
Ridgeline
The first access tonneau cover I purchased from eTrailer in 2008 and I installed it on my 2007 Ridgeline. The cover held up well and I just replaced it with the same model (cover) this year. It fits perfectly. Good and timely shipping from eTrailer.
by:
Calixto
01/29/2026
1997
Chevrolet
C/K Series Pickup
Was as the video said and looks okay tbh it better than other tho.
by:
Adam
08/29/2019
2012
Nissan
Titan
I've been very pleased with the Access Roll up tonneau. The most important feature for me, was that it sat between the rails. I have a Trac Rack mounted on the bed rails, and the Access cover sits perfectly between. The added height of the cover, sits level with the top of the Trac rails. I have a bedslide in the truck, and the extra 1.5" of height from the Access is crucial. My truck is a 2012 Nissan titan. My only complaint, is that the vinyl cover is susceptible to rub marks. I'm a carpenter, and often I place material on top of the cover (while I'm picking up a tool, or staging something...). The vinyl has a few rashes on it. It would also be nice if there were an extra support beam. I have a short bed variant, and there's only 3 supports. I think a 4th and 5th would help add a little tension to keep the cover from flapping at high speed. I had a factory trifold tonneau (solid surface) that was very nice. For the price, this Access is the best option. I've had $300 tonneau on older trucks, and they were OK. The extra $200 for this cover... I must say it's worth every cent. Locking mechanism is great. Hardware is excellent. This is probably the best product for the money. The next step up, is twice the price...
by:
Ralph
10/28/2026
Can’t put the cover on don’t have the hardware to do it!!!!
Mike L.
10/28/2026
I'm sorry about that Ralph. We're currently working with ACI to get the missing hardware sent to you.
by:
Tom D
04/24/2021
2017
Honda
Ridgeline
After installation, the cover and its components appear to be a high quality product. It took me approximately 1 hour to install. The installation manual/process would benefit from having color pictures vice the black and white photos.
Tom D.
4/25/2022
My cover has held up and worked well over the last year. I apply 303 Protectant about once a quarter keeping the cover looking new. I would buy this cover again finding it well worth the price for the quality of the product. I do have two minor comments that would improve the cover. First, the pull string used to release the rear latches feels flimsy for the amount of pressure required to unlatch the rear locks. Second, when I transport a small load e.g. push lawn mower secured at the tail gate of the truck I wish there was away to roll up the cover and secure it about 13 of the way and secure it so it doesn’t unroll and flap while driving. These are minor work arounds that don’t take away from the product.
by:
Mike S.
02/01/2017
2011
Ford
F-150
Roll-up cover installed easily. After 1 year outdoor exposure it still provides good weather protection for the bed. The cover material is taut, does not flap and the hook and loop material seals the sides well.
by:
Todd
04/01/2025
2016
toyota
Tacoma
I bought an access cover for my tacoma back in 2009 and it has worked great for 16 years so when it was time to get a cover for my 2022 GMC Sierra 2500HD, I did not even look at other brands. This new Access cover was just as easy to install as I remember and it looks amazing.
by:
Adam
02/05/2020
Nissan
Titan
This is my second Access Original Tonneau.
That said...I like them! Here's why...
I have a bedslide in my truck with my toolboxes and trailer gear etc... The Access original sits 1.5" above the bed rails, and with the Bedside/Cargoglide the extra clearance is crucial, as all the slide out units eat up 2-4" of height inside the bed. The access cover lets you retain as much storage as possible. Other covers that sit flush, reduce usable cubic footage in your bed.
Here's what I would change:
While the vinyl cover is quite handsome, it marks up, (as all vinyl does). Something with a little more plastic like surface would be nice- snow would slide off easier, and when I place a piece of lumber on top, I don't have to worry about scratching the surface.
Speaking of weight on top, the Access has 3 support bars. I think having 5 would be perfect. They are easy enough to make and add.
Installation tip:
My current Nissan Titan (Gen 2) with the utilitrack system is a PERFECT match to the system. The access side rails sit right on top of the utilitracks, so they cant slide down.
My old Nissan Titan (gen 1) had standard bed rails, and relied on the clamps to hold the rails in place. Now, it's marketed as a no drill system- and as with all no-drill systems- you are at risk of having the clamps slip off. I've had 4 tonneaus from various manufactures, and this has been the case with all of them. I ended up drilling through, and using SS self tapping screws (4 on each side) to affix the rails to the truck. Super solid and easy, just make sure you drill high enough to capture the metal of the truck bed rail. But, if you have a little more patience than I do, the stock clamps will work fine, with some adjusting as you go.
That said...I like them! Here's why...
I have a bedslide in my truck with my toolboxes and trailer gear etc... The Access original sits 1.5" above the bed rails, and with the Bedside/Cargoglide the extra clearance is crucial, as all the slide out units eat up 2-4" of height inside the bed. The access cover lets you retain as much storage as possible. Other covers that sit flush, reduce usable cubic footage in your bed.
Here's what I would change:
While the vinyl cover is quite handsome, it marks up, (as all vinyl does). Something with a little more plastic like surface would be nice- snow would slide off easier, and when I place a piece of lumber on top, I don't have to worry about scratching the surface.
Speaking of weight on top, the Access has 3 support bars. I think having 5 would be perfect. They are easy enough to make and add.
Installation tip:
My current Nissan Titan (Gen 2) with the utilitrack system is a PERFECT match to the system. The access side rails sit right on top of the utilitracks, so they cant slide down.
My old Nissan Titan (gen 1) had standard bed rails, and relied on the clamps to hold the rails in place. Now, it's marketed as a no drill system- and as with all no-drill systems- you are at risk of having the clamps slip off. I've had 4 tonneaus from various manufactures, and this has been the case with all of them. I ended up drilling through, and using SS self tapping screws (4 on each side) to affix the rails to the truck. Super solid and easy, just make sure you drill high enough to capture the metal of the truck bed rail. But, if you have a little more patience than I do, the stock clamps will work fine, with some adjusting as you go.
by:
Christopher P
04/03/2019
The roll up top is great. The convenience it offers is just what I was looking for. The installation instructions were pretty good. I would have liked better weather stripping to seal the tailgate.
25
72
true
Show More Reviews
See what our Experts say about this Access Tonneau Cover
Info for this part was:
Edited by:
Lindsey S
Updated by:
Wilson B
Written by:
Mark S
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Nick S.
11/3/2025
I am glad you are liking the cover! Besides the hiccups installing (I have experienced this as well with my older ranger)but after that the fitment looks really nice on your truck!