To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
When you need to carry tall or bulky cargo, the TonnoSport makes it simple. The soft roll-up design lets you open the bed completely without taking anything off. Just roll the vinyl top toward the cab and secure it with the built-in strap and buckle. When you’re done hauling, unroll it back into place and the cover seals tight again. It sits only 1/2" above the bed, keeping a low, clean look while giving you full use of your truck bed.
Covers that loosen or flap in the wind can wear out fast. The TonnoSport uses EZ Dial tension controls that let you fine-tune the fit by turning a simple dial—no tools needed. You can keep the vinyl pulled tight across the sturdy aluminum bows so it stays smooth through heat, cold, and rain. The Velcro fastening system along the sides holds firm when closed yet rolls back easily when you need access.
Nobody wants to spend hours installing a cover. With this setup, you clamp the aircraft-grade aluminum rails right onto your bed rails using six Tight Bite clamps. The clamp teeth grab into the rail ridges for a steady hold without drilling. Once the rails are on, the cover slides and latches into place. The result is a secure, rustproof fit that’s ready to use in minutes.
Keeping your gear safe is as simple as closing the cover and locking the tailgate. The trigger latch automatically catches when you unroll the TonnoSport, while side slide locks give extra protection when you need it. With the tailgate locked, everything underneath stays secure and out of sight. You can still open and close the tailgate normally, so convenience and peace of mind go hand in hand.
Built for everyday use, the TonnoSport combines a UV-resistant vinyl grain top with rustproof aluminum rails and bows. The material holds its shape and color over time, even under sun or rain. Its aerodynamic design can reduce wind drag, helping with gas mileage while keeping the truck bed neat and protected. This practical mix of strength and simplicity makes it an easy cover to live with year-round.
| Access TonnoSport | Other Access Covers |
|---|---|
| Straight, unpainted aluminum rails and support bows | Contoured, black powder coated aluminum rails |
| A single nylon securing strap | 2 Nylon securing straps |
| EZ Dial barrel-style tension adjustment | XT Dial easy-grip tension controls |
| Weather seal that runs along the truck bed sides | Full-length weather seal that runs along truck bed sides and continues along the cab side of the box |
| 2-Year limited warranty | 3- or 5-Year limited warranty |
| Affordable, entry-level alternative | Feature-rich covers with prices to match |
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. It's Evangeline here at etrailer. Today, we're gonna be taking a look at the Access Tonnosport Soft Roll-up Tonneau Cover. This is an entry level tonneau cover from Access, and we're gonna take a look at the different specs, different measurements, different features, right here at etrailer. So, if you wanna protect your truck bed from the elements, let's say you have a lot of snow, you have rain, you have sun beating down, and you don't wanna mess up your bed liner, that's what a tonneau cover like this is for. It's also if you wanna protect the cargo underneath from those elements as well.
This is gonna be the entry level cover, though. So, if you want the more premium features, definitely check out the other videos of tonneau covers we have here etrailer for some of those more premium items. Access has a bunch of cool ones, but this definitely does check off most of the boxes you might be looking for. So hopefully this video will help you out with figuring is this gonna be the right cover for you, your truck, and your adventures. So even though it's the economy option, it's still a really good looking cover.
We have this installed on our Ram 3500, but this fits a bunch of other trucks as well. Definitely use our fit guide here at etrailer, so you can get the right fit for you and your truck. This is gonna be a low profile tonneau cover that's relatively easy to use. Check out my install on this Ram 3500, if you're curious about that process. So, a soft roll-up tonneau cover means you can roll the tonneau cover up and keep it rolled up, that way you can access your truck bed whenever you want.
So let's do that, and take a closer look at the different features. So this has a seam on the side, and notice how it is aligned and flush with our truck bed. Now, this is only on the sides of our truck bed. If you want the more premium Access covers, that seam goes all the way up, even towards the cab. This one has support beams made of aluminum.
Great, because it's lightweight, easy to maneuver. Also, this prevents people from pealing this up and accessing your truck bed from the side. Now, this is unpainted. I think it's perfectly fine, since it is made of aluminum, but some prefer the black finish that you can find on the beams of the other Access covers. The vinyl cover here feels very strong, feels durable. It is water resistant. Now this doesn't have any drain holes, things like that. So, you're gonna have to hope that if you have the tension tight enough, then it will just run off towards the sides. So, the differences between a soft tonneau cover and a hard tonneau cover, is that this can be punctured with enough force. So if you want to prevent theft in that area, that's when you start looking at the hard tonneau covers. Now, the perks of a soft tonneau cover, is its very lightweight, it's easy to install, and it doesn't take up much space. So, we saw earlier how it did not cover our rear window of our Ram 3500. A larger, or a hard tonneau cover sometimes either has a canister that goes underneath, or folds up to cover that window. So different pros, different cons. This does not include a locking mechanism. Once your tonneau cover is secured, you can then only access it by lowering your tailgate. So your truck itself is the lock for your tonneau cover. This is so lightweight, that even I can install it all by myself. It can get a little tricky on your longer beds, just because you have to have clamps just to hold it up in place, as you use the clamps included with the kit to tighten everything down. So, if those larger, hard tonneau covers, those canister tonneau covers, seem kind of daunting, because they require lifting and the weight or help of other people to lift the weight, this does not require any of that. It's super easy to do. So, my personal thoughts about the Tonnosport tonneau cover, is that if you're looking to enter into the world of tonneau covers, and you don't really wanna spend too much, 'cause you're not sure what type of cover you want, this is a great way to start. It checks off most of the boxes. It covers your truck bed. We have a nice seal on the edge. It doesn't interfere with your tailgate. Doesn't take up room behind your window. Things like that. Hopefully this video helped you out with the different pros, the different cons. I personally think that if you have a larger bed, definitely find something that's a little easier to use, 'cause it does take some time to unroll and roll this back up. For your trucks with shorter beds and smaller beds, your compact trucks, this might be a great option for you, for a quick and easy tonneau cover to throw up on there whenever you need it. And that was a look here at our Access Tonnosport Soft Roll-up Tonneau Cover, here at etrailer. My name is Evangeline and I hope you enjoyed the journey..
Ratings & Reviews
Great cover and still looks and works like new a year later. Has handled long interstate drives without issue. I am happy that I was able to install this on my 2018 Tacoma and leave my rail accessories in tact, still giving me full access to the hooks in my rail when needed. It was also very easy to install by myself.
It wasn't hard to install. Directions could be better
The directions could be better but the product is awesome
Very well built just poor instructions on installation. Would buy again.
Hard to find size, so I appreciate finding it and it being advertised appropriately. Easy enough to install and looks good. If I could change something, the side rails are mounted inside bed, would be nice if they could go on top of the side wall to not take up that space
I like the cover. Instructions could be a bit clearer. Had to still look up a video for installation.
Love it - have had it for a year and its held up great. Compatible with bed rails.
For the price and install time, I really like the cover.
After installation the fit was great.
The only thing is it wasn't very clear how to install the cab weather strip but I got it.
Awesome cover, installed easily, looks great!
The install was easy,I installed it by myself. I have taken it through 15 car washes, it has been through 3 rain storms and has not let any water into the bed. If purchasing again I would get the same exact one as i love the extreme low profile.
I had an extang cover before and liked it better. They no longer make extang
The customer service at eTrailer is absolutely outstanding. They have a great process other companies should follow. I reviewed all the applicable tonneau covers and videos for my 09 Dodge 3500 4x4 LB many times before I chose the Access TonnoSport Soft, Roll-Up. It had to be compatible with complete access to a tool chest & 5th wheel. Once I received the item, the directions described the pieces in "Access's" technical terms. Some pics were dark contrasted, hard to figure out, drawings would have helped. I made slight adjustments according to the troubleshooting page. Overall, pleased with product & the outcome.
Looks fantastic on my 2016 Nissan Titan XD I love the low profile
Install was less than 15 mins following the included instructions.
Works well with the Utili-track installed in my bed.
Highly recommend.
Excellent product instructions could be little better but after some reasoning was able to figure it out.
Overall it has been a great product. I do wish that it wasn't so baggy. But, I understand that the material it is made from tends to do that depending on temperature.
It fits and looks great. Shipping was extremely fast!! I didn't give it a five star rating because the cover mounting instructions were very difficult to follow and not specific to my compact pickup truck.
Excellent cover I love it! Engineering figured out an excellent solution to a tough situation with the Santa Cruz’s truck body constraints and it works as good as it gets. No drilling! Only 4 stars because I did have to debur a number of aluminum extrusion parts. But don’t get me wrong, This cover is exactly what I needed. Good job to the engineers who designed it. Note: I used a set of thick washers (1/8”) to shim up the rails slightly higher than flush of the bed rails so the tail gate could close.
Good value. After one year in the hot Georgia sun, an especially cold winter, and lots of recent rain; the cover continues to hold up well and looks as good as the day I installed it. The installation was fairly easy, but the instructions could use improvement. However, with a little patience the result is nearly a custom fit. I have no negative comments regarding the quality and effectiveness of the product. Easy to use and keeps cargo dry even in the hardest of rainfall.
The Access TonnoSport Soft Roll-Up Tonneau Cover arrived in great shape. I had no trouble installing it on my Maverick. It looks great and works great. Very happy with my purchase.
While initially when I got this cover, I thought it was good quality. After using it for about 10 months, I see that is not true. The adhesive on the back of the Velcro that holds the cover down is not sticking anymore. So the cover is not staying closed. I called support about this and they did send me out new Velcro strips. While I started installing the new strips, I notice the cover maturely has been rubbing against the metal bars that gives the cover its tautness. So they will rub through the cover material probably right when the warranty expires. I really wish I got all my $ back and would buy a better quality cover.
These covers are the best. Getting this one for my 3rd new truck in 14 years. The last one is still in great shape and handled a 40" snow load in 2021. That cover was 5 years old at the time.
Product is great the directions not so great. After the bulkhead rail and side rails are put in tonneau cover should be rolled from the back to the front so you know exactly where everything's going.
The cover fits perfect on my 2024 Silverado. It was pretty easy to install with help from a installation video. I took my time and it took about an hour to install. I needed this type of cover so I could install my ladder racks.
Great cover for a fair price. Easy installation and a sleek, seamless look. This cover is far superior to the one this truck had for its first 25 years.
When installing the rails they would not sit square after tightening the clamps. The bed I have on my Santa Cruz has a plastic liner. Not sure if that was the problem. My son-in-law put two washers behind each clamp in order to square up the rail. That seemed to work. After the headache of trying to figure out how to correct the problem our solution worked. The cover itself looks great on the truck.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.