Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When roads glaze over with ice or frost, these V-bar chains dig in hard. Each link has welded V-shaped studs that act like small cleats, cutting through slick surfaces to give you superior traction where smooth links would slide. The ladder pattern helps you start and stop confidently on steep or frozen grades so you stay in control in the worst winter conditions.
Heavy snow can bog down even capable rigs, but the twist-link cross chains on this setup keep you moving. The 0.312" (8 mm) thick low-carbon steel links grab hold in deep powder and packed snow, clearing a path as the tires rotate. The open ladder layout sheds snow while maintaining constant contact with the surface for steady forward motion.
Getting chains tight while kneeling in the snow can be rough, but the built-in cams make it easier. Once the chains are wrapped around your dual tires, use the included wrench to twist each cam until the links pull snug. That cam-assisted design means fewer readjustments and a solid fit before you get rolling. For extra hold, you can add optional rubber or chain adjusters.
Winter driving eats through weak metal fast, which is why these chains are built from tough low-carbon steel. The material resists bending and breaking under torque and weight, so you can count on them through repeated snow seasons. Each set includes two dual-tire chains—one for the driver’s side and one for the passenger’s side—and a reusable canvas storage bag to keep them ready for the next storm.
For those long winter drives through deep snow zones, these chains are rated for up to 30 mph and fit 20" to 22-1/2" tires. That range gives you strong traction support for demanding winter routes without compromising performance or safety.
These chains fit the following tire sizes:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Adam: Hi everyone. Adam, etrailer.com. Today, we're going to be taking a look at the Titan chain, snow tyre chains. So this does have a V bar style link, which is going to be the more aggressive style of your snow tyre chains. This is going to wear down a little bit more than some of your square shaped links, but it is going to give you superior traction to all of those. It may be a little rougher ride, but this is definitely going to get you out of those snowy or icy situations.
So this is going to be a ladder-pattern style tyre chain. Also, it is going to be made of a low carbon steel construction. It's going to last a decently long time and resist against rust and corrosion. Whenever you have these on, it's probably going to be soft on the roads. So having a nice, solid metal is definitely going to help it wear away.So, these do come in a pack of two, which have a decently sturdy canvas bag.
So for your all wheel drive and four wheel drive applications, you can just grab two sets on etrailer.com and it's going to be the same exact installation process on all four of your tyres. So the first thing we're going to want to do is lay out our chains and make sure there's no kinks in our links. Also, something to note, we want to make sure that the V-Bar is going to be facing out away from our tyre, and the open end here is going to be facing out as well. Once all that's done, we can try to grab the middle of our chains and drape them over our tyre.We'll make sure we get it nice and even. So now that we're back here, we're going to take our spare links here and our hook.
We're going to find a chain. I want to do the second closest, and then we're going to go around front and complete the connection. So around front, we're going to take our metal portion here, put it through a link and bend it over like so, it connects it to our spare link here. Now we can take our cam tensioner tool, put it into place and rotate this around to get that desired tightness.We don't have to do all of them, but I am going to do two here. We do have about four on this kit.
That should be pretty tight. So these cams did do a pretty good job at getting these chains nice and tight. And I only use two of them. There's two more that I could tighten down if we needed to get a little bit tighter, but if you want that added security and comfort, you can go on etrailer.com and purchase some of these rubber tensioners. And all you really need to do is just have the hooks facing out away from your tyres and then go on a diamond or star-pattern just across from each other to get them installed. That's something that you would like to have with your tyre chains. They don't come with them, but, we do sell them here at etrailer.com. Well, everyone, thanks for tuning in and taking a look at Titan chain, snow tyre chains..
Ratings & Reviews
Charlie
1/26/2019
Ive put over 50 miles on mine. I will buy another set when these wear out. I use mine when I plow.
Ayad N.
1/29/2019
Great Product! easy to put on and take off. Video of install is exactly as it went.
Thomas F.
9/17/2017
Have not needed them, but good insurance.
Gwendolyn Y.
10/28/2024
Hey Shloimo. These tire chains fit 225/70-17.5, 225/70-19.5, or 8x19.5. Are one of these your tire size? If not, let me know and I can find some that will work better for you.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Charlie
1/26/2019
These vbar chains are awesome. I dont need 4X4 most of the time.