bing tracking image
  1. Roof Rack
  2. Rhino Rack
  3. Crossbar Rack
  4. Aero Bars
  5. Overhang
  6. 50 Inch Bar
Rhino-Rack Sportz Roof Rack for Fixed Mounting Points - Aluminum - Black - Qty 2
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Rhino Rack

Rhino-Rack Sportz Roof Rack for Fixed Mounting Points - Aluminum - Black - Qty 2

Part Number: RR34FR55GR
In Stock
$849.95
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Videos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
This aerodynamic roof rack gives you the freedom to haul gear and cargo on your vehicle. Full-length aluminum crossbars offer plenty of space for channel mount and clamp-on accessories. Installs to fixed mounting points on your vehicle's roof. Great Prices for the best roof rack from Rhino Rack. Rhino-Rack Sportz Roof Rack for Fixed Mounting Points - Aluminum - Black - Qty 2 part number RR34FR55GR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Q & A (0)
  • Videos (1)
  • Photos

Rhino Rack Roof Rack - RR34FR55GR

  • Crossbar Rack
  • Aero Bars
  • Overhang
  • 50 Inch Bar
  • 2 Bars
  • Black
  • Rhino Rack

This aerodynamic roof rack gives you the freedom to haul gear and cargo on your vehicle. Full-length aluminum crossbars offer plenty of space for channel mount and clamp-on accessories. Installs to fixed mounting points on your vehicle's roof.


Features:

  • Complete roof rack system includes 2 Sportz crossbars, 6 RX legs, and a custom fit kit
  • Aero-style crossbars pair with accessories that mount in the top channels or clamp around the bars
    • Compatible with most bike, watersport, snow, and cargo carriers
    • Works with Rhino Rack accessories that use Zwifloc fastening system
  • Rubberized dual strips help reduce drag and wind noise
    • Guides airflow over the bars to minimize wind noise while driving
  • Lockable cover plates on legs secure rack to your vehicle
  • Custom installation to the fixed mounting points on your vehicle's roof


Specs:

  • Crossbar length: 50"
  • Weight capacity: 165 lbs
    • Always observe your vehicle's maximum roof load capacity
  • Color: black
  • Construction: aluminum
  • 5-Year warranty


SZ126B-U Rhino-Rack Sportz Aero Crossbars - Aluminum - Black - 50" Long - Qty 2

RX300H-2 Rhino Rack RX300 Fixed Mount High Leg Set for Roof Racks - Qty 2

RX300H-4 Rhino Rack RX300 Fixed Mount High Leg Set for Roof Racks - Qty 4

RCP03-BK Custom RCP Fit Kit for Rhino Rack RCH, RCL, RVH, and RVL Series Roof Rack Legs - Fixed Mounting Points





Video of Rhino-Rack Sportz Roof Rack for Fixed Mounting Points - Aluminum - Black - Qty 2
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Rhino-Rack Vortex Roof Rack Spec Review

Today we're going to take a look at the custom RSP Fit Kit for the Six Rhino-Rack RC and RV Series Roof Rack Legs with Fixed Mounting Points. Now this is a custom fit part, it is designed to fit the Toyota Land Cruiser Prado and the Lexus GX vehicles. And to check the years that this will fit, as I would recommend for you to go our website, use our fit guide, put in your year and model vehicle, and it'll show you if this will work for your application. Now this custom fit kit allows you to mount six Rhino-Rack RC or RV Series Legs on your vehicle with fixed mounting points. The legs we do sell separately on our website.Basically, the threaded studs will screw into the fixed mounting points. And they provide attachment points for the legs.

These legs will slide onto those studs and secure with the hex bolts. These molded pads are designed to fit the contours of your roof and it protects your roof from any scratches and abrasions. These inserts right here, they're precision molded inserts and they'll cover the bases when the legs are removed from your vehicle. Specs again, this application is for Rhino-Rack RCH, RCL, RVH, and RVL roof rack legs. Comes with everything shown here on the table.

Quantity of the six pads right here, the six inserts that go inside of them, all your mounting hardware, and a nice set of detailed instructions on how to install them. But that should do it for the review on the custom RCP Fit Kit for Six Rhino-Rack RC and RV Series Roof Rack Legs with the Fixed Mounting Points.

Ratings & Reviews

4.6

330 reviews
5 Stars
(258)
4 Stars
(41)
3 Stars
(12)
2 Stars
(9)
1 Star
(10)
Review Sort Icon
by:
2007 Lexus GX 470
by:
2010 Ford Van
Nice strong crossbar. Does not make any noise in the wind on my camper shell. using it for surfboards and kayak's etc. Very versatile and strong.
Kate F. profile picture
Etrailer Expert

Kate F.

10/8/2025

Nice set-up Stacey! So where are you mainly surfing or kayaking? I grew up in SoCal and have not been on a surfboard since I was 14, I wonder if it is like riding a bike?

Stacey profile picture

Stacey

10/9/2025

@KateF Hi Kate I added that picture and realized that was right before I installed the rack system. I was not able to remove the picture from the e-mail. I'll send updated pictures soon. I do a little bit of everything with the racks and as far as surfing it's never too late to get back in the water. There are people out here surfing into their 80's so jump back in. Surfs up!!!!
Kate F. profile picture
Etrailer Expert

Kate F.

10/16/2025

@Stacey I will definitely keep that in mind next time I am near an ocean Stacey! Surf up =)
by:
While the fit is excellent on these feet, and the finish seemed good to start, after 2 years they have corroded and bubbled underneath the black coating. For the price, I expect them to last without corroding/finish failing for longer than that.
by:
Working great to mount my crossbars and kayak rack.
by:
Could not be better! 100% perfect. Not only was it exactly as described, shipping and updates were fast and accurate. I'll be sure to use etrailer again!
by:
Really like the sleek look of these bars. Paired with the Rhino Quick Mount legs, they were a good solution for the Thule Tracker II rails installed on our truck cap.
by:
Installed on a 2025 Honda CRV with vortex aero bars that I used to have on another car. Feels solid enough to lift the car with. I love this rack.

Note that eTrailer (or Rhino Rack, not sure) recommends spacer blocks for the rear bar on CRVs, to lift it a little higher and make the rack more level front-to-back. Otherwise there's a bit of a slope to a canoe or kayak due to the slope of the roof profile. The Honda factory bars don't adjust for this and they carry my boat just fine (other than being kind of wimpy), so I don't think the spacers are needed for the Rhino Rack, either. Maybe just for aesthetics. I did not buy them.
by:
We had been shopping around for roof options for our new 2022 grand Cherokee, when we came across this. For us, the OEM mopar crossbars were ugly - extend about 6 inches from the roof. These are very low profile, and insanely sturdy. Additionally, installation is crazy simple.

The only recommendation we have that differs from the instructions - we used the rear set of mounting holes on the factory rails. Using the front set of holes as recommended by the instructions for cross bars meant that ski racks would be too close together, and the ski bindings would not fit. Other than that, very satisfied!
by:
2019 Jeep Grand Cherokee
Purchase for a 2019 Jeep Grand Cherokee, black rails. Perfect fit.
Jerry profile picture

Jerry

3/20/2026

After a year, still happy about this.

by:
These Rhino-Rack products are solid. Installation was quite simple. It took me no more than 2 hours from taking off the OEM rails to getting the crossbars to tighten down.

Keep in mind that these legs were designed for the Toyota Prado (it even says so on the installation guide). Once you remove the Lexus OEM rails, you will notice a groove, about 3/4" deep and 1-1/8" wide, alongside the roof. If your GX does not come with the OEM rails, the grooves might already be covered up by the factory drip trim pieces (Toyota PN 75557-60050, 75555-60030). This Rhino rack kit does not come with any hardware to cover up the grooves. I was told they would not cause any leaks because the mounting points are tightly sealed.

But if you have severe OCD like me, those grooves will be bothering you (even though you can't see them). Instead of paying over $xxx for the OEM trims pieces. Fill them up with some 3/4"wide 3/8 inch thick insulation tape, then tape a strip of 1" wide, 1/8" thick neoprene rubber strip on top. The end product looks just like OEM. I hope my simple idea will help other fellow OCD survivors.
by:
I searched a lot of websites before finding what I needed on etrailer.com for my 2012 Suzuki GV. I was looking for the proper mounts to install a Kayak rack system. Because my vehicle has a built in rail system it was very confusing what was needed. Thank you etrailer for hooking me up with the appropriate parts for the Rhino system, it worked great!
by:
Everything came promptly, no issues. Everything fit and the videos from eTrailer are a great help!
by:
Great item, pretty easy to install. I posted a longer review for the full setup on our 2019 Highlander with 2 biggish kayaks under reviews for the rack pillars, Item: RRRCL4. When fully tied down, we used hood loops front and rear for both boats.

Great service from Carol C.
by:
2022 Subaru Forester
It is crazy that larger bars like the 59" won't fit my car. When buying racks, the issue has always been that you can't go too small. But these have a 36" long metal obstruction in the bottom T bracket and so it limits how much the towers can come together. Get Malone, they are less expensive, have broader fit range, can handle longer bars and have an integrate lock.
by:
I AM SO PLEASED W/MY PURCHASE AND THANKS TO ETRAILER THE WHOLE PROCESS OF SELECTING WAS MADE EFFORTLESS W/THE STAFF ONLINE AS WELL AS VIA PHONE.
THE VIDEOS ARE INCREDIBLY USEFUL AND SO PRECISE AS TO INSTALLATION AND IN HELPING TO CHOOSE THE CORRECT ITEM FOR THE PARTICULAR AUTO DRIVEN. THE REPRESENTIVE, NICOLE WAS VERY KNOWLEDGEABLE AND SO CONCERNED TO GIVE YOU THE BEST SERVICE POSSIBLE. ETRAILER...PROFESSIONAL....TOP VALUE....A PLEASURE TO DO BUSINESS WITH.
by:
Love etrailer. They always have anything and everything you need and always at a great price. Also great videos and tutorials to help with your DIY install! Salvaged my old Rhino Aerobars with a new Rhino roof kit from etrailer for my Bolt.
by:
Well made parts, shipped quickly. I was able to install the rack with no problems by following the instructions. Good choice if you want a quality roof rack for $xxx less than a comparable Thule or Yakima.
by:
Price, Quality, communication, Shipping Speed. Everything about this is excellent!
by:
2015 Ford F-150
Fast shipping and exactly what I needed. Spent a lot of time figuring out what I needed for our truck's tonneau cover wrt rack systems and this looks perfect!
by:
2023 Buick Enclave
Fitment is good, did not come with security capscrews even it included a security wrench. The rack can be removed with allen wrench.
When rack is in place, I cannot use the sunroof on 2023 Buick Enclave.
Otherwise, it works fine!
by:
Item arrived on time.
by:
Perfect fit. Mounted easily to aftermarket roof rails.
by:
Terrible hardware. Screws broke inside fixed mounts twice rendering while system completely useless
by:
Looks amazing, and was super easy to install.
2021 Jeep Grand Cherokee L 4x4 Limited
by:
Wuick order delivety and GOOD follow up !
25
330
true
Show More Reviews

See what our Experts say about this Rhino Rack Roof Rack

  • Can Rhino Rack Sportz Crossbars Be Cut Down If They Are Too Long?
    Hi Roger! I see you placed an order for the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars # Y02-480B already, but I still wanted to get you an answer to your question. While some crossbars can be cut down to size, the ones included with the # Y02-480B cannot. The bottom of the bars have a short track in them for the towers to mount in, but they do not go all the way across the bar (see included image). Cutting the bar down can and will shorten that space...
    view full answer...
  • Can I use my Roof Racks bars from my 2022 Jeep Grand Cherokee on my 2018 Lexus GX460?
    Thanks for reaching out Oliver, You can definitely reuse your existing Rhino-Rack Vortex Aero crossbars # RVA126B-2 from your 2022 Grand Cherokee on your 2018 Lexus GX 460. However, the current RCL4 legs and RCP64-BK fit kit are not compatible with the GX 460. For the Lexus, you’ll need the Rhino-Rack # RR99AG legs along with the # RRRCP23-BK custom fit kit, they're designed specifically for the GX 460’s fixed mounting point rails. Your two existing crossbars will work fine for most...
    view full answer...
  • Rhino-Rack Pioneer Platform Rack for a 2009 Lexus GX 470
    The 60" x 49" Rhino-Rack Pioneer Platform Rack # RR35TB requires specific fit kits and is only compatible with certain vehicles. We do have a Pioneer platform rack that will fit the factory crossbars on your 2009 Lexus GX 470 but unfortunately this is not the correct part number. Instead you need to use the 58" x 47" Rhino-Rack Pioneer Platform Rack # RR42115BF which is a universal fit that is compatible with round, square, elliptical, and most factory crossbars. This rack features mounting...
    view full answer...
  • How Do I Carry Bikes, Kayaks and a Generator When Towing a Travel Trailer?
    For carrying the Kayak I recommend installing roof rails on your 2007 Lexus GX 470. With the rails you will be able to mount the Malone DownLoader Kayak Carrier # MPG114MD to the rails and will be able to carry 2 kayaks on your roof. If your Lexus already has the factory side rails that run front to back, the Inno Aero Crossbars # INXB130-2 and Inno Through Feet for Aero Crossbars # INXS150 will be what you need for the kayak carrier. With no factory rails you will need the Rhino-Rack...
    view full answer...

Do you have a question about this Roof Rack?


Info for this part was:

Employee Wilson B
Updated by:
Wilson B
Employee Daron K
Edited by:
Daron K
Employee Alex H
Written by:
Alex H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924