When you're ready to refresh more than just one wall, this 400 sq. ft. peel-and-stick kit gives you the room to update larger sections of your RV at once. It covers worn finishes and lets you redo more of your space in a single roll.
Life on the road leaves its mark. This peel-and-stick vinyl smooths over cosmetic flaws, seams, and dated wall finishes, giving you a cleaner, more finished surface without tearing your rig apart for a full remodel. It's a practical way to update interior walls when paint isn't a good option or you want a more uniform finish.
This isn't standard home wallpaper. The vinyl construction and RV-grade adhesive are designed for interior RV use, where walls flex and conditions change. The adhesive holds through humidity, temperature swings, and storage, helping prevent sagging or edge lift on common RV wall surfaces. Once installed, it's designed to stay in place. The Crisp Linen finish adds visual depth without overpowering small spaces, making it a good fit for bedrooms, dinettes, and accent walls.
Each roll in this service kit covers 400 sq. ft. and measures 100' x 4'. Measure the height and width of each wall you plan to cover, then total the square footage to determine how many rolls you'll need. Because this larger roll covers more surface in a single run, it's a practical option when refreshing full walls or larger sections at once. If you're covering multiple walls, add the areas together and round up to allow for trimming and alignment.
Prep is straightforward. Trim away loose wallpaper, sand raised seams, and clean the surface so the adhesive can bond properly. This wallpaper works best on smooth, clean surfaces and is not recommended for heavily textured, greasy, or unprepped walls. Cut the vinyl to size, peel off the backing, and press it into place. A light mist of water gives you time to reposition panels before the adhesive sets. 
Once aligned, the included seam tape bridges panel gaps for a clean, uniform look. Minor bubbles or light creases can be smoothed out during installation, making this kit forgiving for DIY installs.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, Matt with etrailer. Today we're gonna be taking our first look at the Genesis Revive line of products. Now, they're gonna have a lot of different options. They're gonna be great for a lot of different people too. So if you're the person who's had your RV for years and you just want to update or refresh it so it looks a little bit nicer, you can do that. Or if you just got that new one and the vibes just don't meet your aesthetic, you can change it to meet those.
Now with that being said, there's gonna be a lot of different patterns and colors here on our website. So if you wanna take a closer look at 'em, come on by. Now we're gonna have some for your ceilings, so you can replace the whole ceiling or just sections. Some for your cabinets and your walls too. And speaking of which, one of our coworkers, she just used this to replace the walls of her slide out with this exact pattern we have.
It worked out great because she had some stains, some scratches, and it just made things look a little bit nicer. Now I will say that did take a little bit of time. Took her around six hours, and she did it by herself. So if you have a friend, it's gonna make that must faster. So that's something to definitely keep in mind when you are installing this.
Speaking of which, we'd love to see how you're using it or what you are using it in, and send us any before and after pictures just to show us what the difference is. But if you guys have any other questions, please let us know here at etrailer. And again, I'm Matt, and thanks for watching.
This stuff is awesome! I put this on a new wall with bare luan paneling. The product is very thick and super easy to lay on. Because of its weight I didn’t struggle at all with wrinkles, stretching, or bubbles. It completely conceals panel seems and staple holes with no prep. I didn’t use the seam tape because I was able to get such a tight seam that it looked cleaner without the tape. It’s adhesive lets you lift it off and wall and reposition it if needed within a few minutes of application. After letting it sit for a while when I tried to lift a test piece it peeled a layer of the luan plywood with it. I would call that good adhesion. It is easy to trim with a razor blade and cuts very cleanly. It seems very durable and able to be wiped with a wet cloth. I just got it in so time will tell how well it resists stains and how durable it is but I expect it will do well from what I can see so far.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.