See what our Experts say about this Stallion ATV Ramps

• Which Aluminum Loading Ramps for Loading Harley Davidson TriGlide onto Trailer
  For getting your trike up onto a trailer, using the # 288-07452-2 along with the # 288-07452 ramps as you've proposed would be the best bet, and would be what I'd recommend. The combined capacity of the ramps would handle the weight of your TriGlide perfectly, as long as you can devise some way to tie the ramps together so they stay properly spaced.
  view full answer...
• Looking for Ramps for Rafting Trailer to Help Load
  Hey Bill, so for a ramp set that is priced great that is aluminum so it could be tossed around a bit easier we have the Erickson set part # EM85WV which will give you a set of two ramps that are 72 inches long and 9 inches wide. These don't fold so they would take up a bit more space. Instead for a folding set we have the part # 288-07452-2 which are similar in dimension but are also arched which help with the transition from the ramp the trailer as well. Would either of these work for you?
  view full answer...
• Ramps for Loading Golf Cart Into Tall Bed of Ram 2500 4x4
  The Stallion Arched Loading Ramp Set - Center Fold - Aluminum - 88-9/16" Long x 13" Wide - 1.5K # 288-07452-2 will work well to get your golf cart into the bed of your Ram 2500 4x4. The maximum loading height for these ramps is 35 inches. The overall dimensions are 88-9/16" long x 13" wide with an inside ramp width of 11 inches. These ramps are lightweight, adjustable spaced for 4 wheeled equipment like a golf cart, ATV, or UTV. The rubber-tipped ends help stabilize the ramps for added...
  view full answer...
  
• Transporting Motorcycle and Camper with Short Bed Truck
  As both a camping and motorcycle enthusiast, I understand. I have a short bed F150 and 18' camper, non toy hauler. If loading your motorcycle in the back of truck is an option for you, I suggest the arched style loading ramps. This style is my personal preference, we have the arched loading ramp # 288-07452 and the set in Item # 288-07452-2. These are center fold design aluminum ramps 90" Long x 18" Wide. Since you do not have a long bed truck perhaps this would work with leaving...
  view full answer...
• Recommended Loading Ramp for Snow Blower with Tracks
  To load your Honda HSS 1332 ATD snowblower with tracks, I recommend the Arched Loading Ramp Set - Center Fold - Aluminum - 90" Long x 13" Wide - 1,500 lbs # 288-07452-2. This will give you slip-resistant rubber-tipped ends to stabilize each ramp and safety straps to prevent movement when loading and unloading. The Tru-grip rungs will give your tracks the traction they need and the ramps can be spaced apart as needed for proper width.
  view full answer...
• Rung Spacing and Sharpness of 88-9/16 Inch Long Arched Loading Ramp Set
  Great questions! The spacing between the rungs on the Arched Loading Ramp Set # 288-07452-2 is 3" as you can see in the attached photo. This shouldn't be an issue except for pretty small tires. You can check this spacing against your tires to make sure it isn't too much that your tires get stuck. When it comes to the holes on the rungs those are actually smoothed out compared to most other ramps. We actually have a review on the page where someone pointed out how nice it was that they...
  view full answer...
  
• Golf Cart Ramp Recommendation for Loading into Bed of Truck
  Best option we have for you would be the Arched Loading Ramp Set part # 288-07452-2. These ramps are arched which will help prevent the golf cart from bottoming out and are also 88-9/16 inches long. They also are our best priced option as well.
  view full answer...
• Carrying A Golf Cart In A 2018 Nissan Titan XD Diesel And Towing A 2020 Forest River Grey Wolf 29TE
  Per the Nissan Titan brochure for 2018, the Nissan Titan XD Diesel 4x4 crew cab has a 2,080lb maximum payload. Golf carts are about 1,000lbs usually and are typically right at 8 feet in length. If your truck bed is 8 feet you will have most likely right at 30 percent of the golf cart's weight as 300lbs of additional tongue weight. To determine if your golf cart is pushing you over the limits use the GCWR of your Titan (can be found on the sticker on your driver's side door jamb), subtract...
  view full answer...
• Ramps to Load Golf Cart in Back of Truck
  To load your 1,000 lb golf cart in the back of your truck I recommend checking out the Arched Loading Ramp Set # 288-07452-2 which will work for you so long as the height from your tailgate to the ground is no more than 35". These ramps have a 750 lb capacity each for a total capacity of 1,500 lbs and you can position them to fit the width of your golf cart. I have added a photo a customer sent in showing how he used them on his truck.
  view full answer...
  
• Can the Arched Loading Ramp Set # 288-07452-2 Support a 1,450 Pound Mower?
  It won't be an issue. Since the combined weight of the # 288-07452-2 is 1500 pounds, the ramps are designed to withstand the 1,450 pounds of your mower. However, if you are worried about it, you can always go with the # 288-07474-2 which has a 1,600 pound maximum capacity to give you more wiggle room.
  view full answer...
• What is the Space Between the Steps on the Arched Loading Ramp Set Part # 288-07452-2
  I went out to our warehouse and measured the space between the steps on the Arched Loading Ramp Set part # 288-07452-2 for you and the distance between each of the steps is 3" from end to end. The steps are very lightweight weighing in at only 18 lbs each with a weight capacity up to 750 lbs per ramp. If these loading ramps will not work for your mower please let me know and I would be glad to offer a more viable solution for you.
  view full answer...
• Compatibility of the Mad-Ramps Pivoting Ramp System # MR54FR with 10 Ft. Wheelbase Golf Cart
  While we have a great ramp set you can use, the Mad-Ramps Pivoting Ramp System # MR54FR will not work with your 10' (120") wheelbase on your Advance EV golf cart. This is because the # MR54FR only accommodates wheelbases up to 88" measured from the center of the front axle to the center of the rear axle. As a great alternative, I recommend using a ramp set like the Arched Loading Ramp # 288-07452-2. This ramp set has a maximum weight capacity of 1,500 pounds and folds for easy storage....
  view full answer...
• Quad/ATV Ramp Recommendation for 150-Pound Youth Quad
  In order to make the loading easy and save your back, the best bet is to use a ramp. I recommend using the Arched Loading Ramp # 288-07452-2. This particular ramp comes with more than plenty of weight capacity for your 150-pound quad. Another great feature is that it folds at the center for easy storage. As far as the maximum load height of this ramp, it can accommodate heights up to 35" high.
  view full answer...

Do you have a question about this ATV Ramp?