You shouldn't have to climb into the cargo area just to pull a cooler from behind your bins. This slide-out tray brings cargo out of your rig so you can grab what you need. Bolts to factory mounting points with included hardware.
When your cargo area is loaded with a cooler, tool case, recovery gear, or a kitchen setup, reaching the items behind it can turn into climbing in or unloading half the back. This sliding tray pulls your stored gear out to the rear opening, giving you full slide-out access instead of forcing you to reach deep into the cargo space. Loading, grabbing, and packing back up take less effort because the gear comes out to where you're standing.
The tray gives your cargo setup a dedicated platform for planned loads like storage bins, coolers, tools, recovery gear, or camp kitchen items. Its 31-1/2" wide x 26-1/2" deep deck gives you a defined space to arrange the items you need to reach often, while the 250 lbs capacity provides plenty of support. Your gear stays within reach and the cargo area works better for packed trips where the same items get opened again and again.
A slide tray can become a problem if it blocks the storage spaces and tie-down points you still use. This tray is compatible with underfloor storage and factory tie-down points, so your cargo area keeps those practical features in play after the tray is mounted. You can organize gear on the platform while still working around the cargo features that help keep your setup useful.
Loaded gear feels very different from an empty tray, especially when you're pulling out dense tools, a packed cooler, or camp supplies. The heavy-duty slide mechanism is made for regular use, and the tray mounts securely to the cargo floor to support stable operation. The tray moves the weight out where you can handle it, making repeated access during trips feel more controlled and practical.
Installing a cargo tray is a lot easier to commit to when you don't have to drill into the cargo floor. The bolt-on kit uses existing mounting locations, giving your setup a secure mounting path without permanent modification. Once it's installed, the tray is fixed to the cargo floor for stable operation and your vehicle isn't locked into a one-way modification.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Steve here with etrailer. Let's take a look at the MORryde cargo area sliding tray for Jeep Wranglers. Folks, this is a custom fit application. It's gonna bolt right into existing mounting locations. That way you don't have to worry about drilling into your cargo area of those Jeep Wranglers. So again, folks, always double check the fit guide to be sure you're getting the right parts to fit your vehicle.
Now, what's neat about this product is it's gonna give you a full slide out whenever you use it, and that's gonna give you access to loaded coolers, tools, toolboxes, anything you can think of in the bed of that cargo area. And it's gonna be organized because now everything is gonna stay into the tray and you can easily get in and out if you need to. It can support 250 pounds. And again, like I said earlier, it mounts directly to the existing mount locations in the floor of that cargo area of that Jeep Wrangler. So you have hardware here included.
You have a bracket here in the back, and you have a side bracket over here, I'm gonna go ahead and come over here and show you that. Now, I just left these loosely on the table just so you can see 'em. One thing on the side, there's nuts and bolts here in the tray. When it comes that way, you'll just undo those and rebolt it back in place. Same thing with the back one.
You'll just put the hardware included and then obviously the ones that go into the foyer. So to open it, you got a blue latch here, one on the opposite side. You're gonna release both of those to give you that full extension I was talking about in the cargo area of the vehicle. Now when you go all the way out, it will lock out. I'm stopping it just before then, so I can still get it back here in the studio.
But really, really neat design. It's really, really smooth. MORryde's been around for ages and it locks back in when it's closed, as you can see. You've even got some holes here, if you need to put straps over stuff, you could do that as well. Now, inside measurement of just the cargo basket or cargo glide itself, I got 29 1/8 inches wide by 24 3/4 inches deep. Again, folks, this is the MORryde cargo area sliding tray for Jeep Wranglers. I'm Steven. Thanks for watching.
Ratings & Reviews
Fixs perfectly in the 4xE with SubWoofer. I made a custom 3/4" plywood automotive carpet panel to replace OEM panel, such that it lays flat. Our 43Qt Setpower cooler fits as shown or rotated 90 degrees ; however, the lid clears the metal shelf as shown. Great for camping , trails, or grocery trips.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.