No-Rattle Trailer Hitch Wedge for 1-1/4" and 2" Trailer Hitches by Boone Outdoor Hardware

No-Rattle Trailer Hitch Wedge for 1-1/4" and 2" Trailer Hitches by Boone Outdoor Hardware

Item # 93347

lowest price pledge

Retail:$8.95

Our Price: $6.89

You Save: 23%
Hitch Anti-Rattle

Orders above $50 qualify for Free Shipping

Shipping Weight: 0.22 lbs

Arrives before Christmas with Ground or Free Shipping.
Quantity: 
In Stock, Ships Today
Boon Outdoor Hardware No-Rattle Trailer Hitch Wedge for 1-1/4 Inch and 2 Inch Trailer Hitches
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos

Call 800-298-8924 to order Boone Outdoor hitch anti-rattle part number 93347 or order online at etrailer.com. Free expert support on all Boone Outdoor products. Guaranteed Lowest Price and Fastest Shipping for No-Rattle Trailer Hitch Wedge for 1-1/4" and 2" Trailer Hitches by Boone Outdoor Hardware. Hitch Anti-Rattle reviews from real customers.
  • All Info
  • Reviews (199)
  • Q & A (121)
  • Videos (2)
  • Photos
  • Why etrailer?

Boone Outdoor Hitch Anti-Rattle - 93347

  • Fits 1-1/4 Inch Hitch
  • Fits 2 Inch Hitch
  • Fits 1-1/4 and 2 Inch Hitch
  • Standard Anti-Rattle
  • Accessory Anti-Rattle
  • Towing Anti-Rattle
  • Boone Outdoor
  • Wedge Style
  • Universal


No-Rattle Trailer Hitch Wedge by Boone Outdoor Hardware

Don't be fooled by its size. This little wonder has a big job. The Hitch Wedge performs double duty by holding your hitch gear tightly and providing extra security for the hitch pin. Hitch racks will stand stone cold solid with the Hitch Wedge. Install it and forget about it.

  • Serves as hitch gear stabilizer
  • Wedges itself between the receiver and hitch gear to take up play and eliminate irritating rattle
  • Holds hitch pin tight
  • Is easier to use and less expensive than other stabilizers
  • Doubles as anti-theft device
  • Carbon steel construction
  • For 1-1/4" x 1-1/4" and 2" x 2" trailer hitches

Note: Will not work with trailer hitch locks that sit flush against the outside of the hitch receiver. Will not work on Ford Edge and 2011 GMC Terrain vehicles with a factory installed 1-1/4" trailer hitch.

93347 2" and 1-1/4" No-Rattle Hitch Wedge by Boone Outdoor Hardware





Video of No-Rattle Trailer Hitch Wedge for 1-1/4" and 2" Trailer Hitches by Boone Outdoor Hardware


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Boone No Rattle Trailer Hitch Wedge Review

Today we'll be taking a look at the Boone no-rattle trailer hitch wedge for an inch and a quarter and 2 inch hitches, part number 93347. Although, don't be fooled by its size. This little hitch wedge here, it pulls double duty by securing any hitch accessories as well as secure your hitch pin. For extra security, it runs through this heavy steel carbon construction wedge, goes over the hitch pin, and puts pressure when tightened. So it actually doubles as an anti-theft device, making it difficult to remove the pin. As you can see with the wedge installed and tightened, We have very minimal rattle within our ball mount. As you can see, it's shaking the vehicle.

Without the no-rattle wedge installed, we've got quite a bit of movement within our ball mount. Now that we've gone over some of the features, I'll go ahead and show you how to put it on. What you'll want to do is you'll make sure that your clip is off your pin. That way you can slide your loop in over the pin. We'll want to make sure that our wedge goes over between our receiver and our hitch accessory. Then we can go ahead and put our clip back in place to secure that.

Then we'll go ahead and hand tighten that nut down. I'm going to grab my half inch wrench and tighten that down until the rattle is relieved. There. And with that tightened, you can see that the rattle is gone. And that's going to complete our look at the Boone no-rattle trailer hitch wedge for an inch and a quarter and 2 inch hitches, part number 93347. .


Customer Reviews

No-Rattle Trailer Hitch Wedge for 1-1/4" and 2" Trailer Hitches by Boone Outdoor Hardware - 93347

Average Customer Rating:  3.6 out of 5 stars   (199 Customer Reviews)


- 93347
by:

Item did not work for me so I had to replace this item with another anti-rattle unit. 707571



- 93347
by:

Work very well for highway use I used these on an extension hitch of 41" for my Lance camper overhang. Used 1 on each receiver for lateral movement and chain turnbuckles for vertical movement. This combination along with a 1500 lb. trailer pulls great on the highway. I would not expect the same results if I tore off down a logging road like a bat out of hell. If used with fairly constant hitch weight on fairly even surface and one not two devices (not enough room) to press hitch against the opposite wall of receiver it will surely keep the tail from wagging the dog while going down the highway. 3254



- 93347
by:

Sorry I have ordered from etrailer before and always been very happy. I would say this product should be clearly labeled as a second choice and only to be used if you have a solid shank attachment. It did practically nothing for my application even modified wedge to fit in better but no help. I called and got the internal hitch with pin and it is infinitely better.I should have called first but the wedge was highly touted on the site and that is my only suggestion....possibly make it clear that the internal pin is so much more effective if you can use it as was explained when I called .. Thanks . the wedge was inexpensive so I did not pay to ship it back...have other great e trailer products! 186554



- 93347
by:

Works as expected good product would recommend to others. 628495



- 93347
by:

The quality of the device is excellent, however it does not work as fabricated with my 1-1/4" receiver hitch. The dimension from my pin centerline to the face of the receiver is too short, and I am unable to tighten the nut. Product description says that it works with MOST 1-1/4" hitches. It would be nice if the Website identified a minimum dimension that is required for it to work. I will attempt to modify the fabrication to make it function. 167330



- 93347
by:

The package comes saying that it will work with all 2" adapters and some 1-1/4" adapters. I have a 1-1/4" adapter and the product doesn't do a whole lot. Because the tolerance is so small on the smaller adapter the wedge really doesn't fit into the "crack" between the receiver and square post. I adapted it some by grinding the wedge to a finer point and it will at least point into the crack. It does stop some of the movement when tightened down but not a whole lot. The problem with the design is that the post sticks several inches into the receptacle and you are trying to stop movement way toward the front. It just creates a better pivot point where it lock against the post but it will still move back and forth from the "play" 2 or 3 inches inside. I tried to tighten it down more to make it stop but it just started bending the clamp at a certain point. I would say this will work for you well only if you have a 3/16" inch gap between your post and our receptacle. ...but again...maybe it is just because I have a smaller hitch. It was worth the gamble because there are not a lot of options for the smaller hitches. I will use it to stop some of the play unless I can find a better solution. Good luck. 119650



- 93347
by:

etrailer is really great to buy from. unfortunately the anti-rattle device only woeked half way. it silenced the rattle( rattle is a mild description of the noise ) in the lateral side-ways movement but not the up an down motion. I've never noticed hitch rattle before with pick up trucks. the Honda Accord has a sonic reverberator right over the hitch assembly. it' called the trunk. i'm screwed. 130989


Comments

the anti rattle can,t stop vertical move which causes rattle. if utility trailer is loaded the the weight prevents rattle. my 9ft. pontoon boat weighs only 75 lbs.not enough to stifle rattle if a solution is available i,d like to know

ed s - 05/16/2015

11751

Thanks for the feedback. If you have 2 inch hitch you might consider checking out the # BX88224 Hitch Receiver Immobilizer. This should help with both the vertical and horizontal movement of your drawbar.

-- Rachael H - 5/19/2015


- 93347
by:

This product is as described, and works just fine. 132428


Comments

The product has held up well.

Bernie B - 05/27/2015

12066

- 93347
by:

I recived this product unknowingly from my brother in law. Knowing that I did not order I proceeded the process of sending it back although I thought it was something I could use. Then I found out it was a gift and I was very glad because it solved a annoying problem with my tow hitch. Now no more rattling or move ment of the hitch in the reciver. Great product, 5 stars 457205



- 93347
by:

Inexpensive fix for a common problem. 729243



- 93347
by:

put them on my cooler rack hitch.waiting to make the trip 717999



- 93347
by:

Not enough gap between hitch and receiver for device to wedge into. Never used it. 695294



- 93347
by:

I used this product to help with a a hitch adapter that would go from 2" to 1 1/4." I could not get it to stop the play in the hitch adapter unfortunately. I don't know whether it was me or the part, but I had to send it back. 673694



- 93347
by:

This lock definitely quiets down any hitch noise. Easy to install. 649621



- 93347
by:

Product has worked great for me. I have used it on multiple vehicles. 641206



- 93347
by:

U-bolts two sizes ordered. non-standard sizing available through etrailer and they were heavy duty. Fenders were heavy Duty. Good design and quality. The receiver hitch jam to reduce rattle of the hitch did not work. Too thick. All in all, etrailer is a great place to shop. lots of fun projects 640438



- 93347
by:

It did not work as described because it's thickness made it impossible to wedge it in. More importantly, when we called customer service we were chastised for not talking directly to them before purchasing online...um...then why have online purchasing if the customer must call first? Lastly, it would have cost us more to return it than to just throw it out. 628161



- 93347
by:

Product works great and at a affordable price. 609314



- 93347
by:

Works well stops utility trailer hitch rattle when i use it which is not often. 605664



- 93347
by:

Product was as advertised and works wel l. 605577



- 93347
by:

I use the anti-rattle device and it works just what it claims to do. 598771



- 93347
by:

This may work for some 2" applications but it does not fit with any of the 1-1/4" applications I tried. The "wedge" does not actually wedge itself into the hitch like it is supposed to so it does absolutely nothing. 594967



- 93347
by:

Great product, delivered on time, no pr oblems 592574



- 93347
by:

Took rattle and play out 592417



- 93347
by:

Unfortunately for me the product does not work for me. It doesn't matter how much it is tightened it doesn't secure the hitch from rattling. 591585



- 93347
by:

It works. 589596



- 93347
by:

Seems to work OK 583915



- 93347
by:

Stoped the bike rack from wobbling !! 582160



- 93347
by:

It did not work for me. It only stopped the rattle left to right, not up and down. A waste of money for me. 579729



- 93347
by:

I am sorry to say that it didn't work on my hitch not because of your product because i was just to tight around the stinger for the wedge to go in. 579627



- 93347
by:

Easy install on hitch pin and no more banging around of drop hitch in receiver tube. 579570



- 93347
by:

I have used representives help both times I ordered. Unfortunately, the first time around representative put together a package for me with incompatible parts. So I had to go through hassle of replacement, they offered rma label and shipped me a new order with correct part. All in all is good. 568941



- 93347
by:

-The adapter fits between my bike rack and receiver perfectly. Allows rack to be tightened in place with no wobbling or rattles-as advertised! 553061



- 93347
by:

Good quality product. 550212



- 93347
by:

Simply made and simple to use. Serves it's function as advertised. The eye-bolt doesn't seem to be hardened in any way and a ham-fisted wrench jockey could possible over-tighten it. 526714



- 93347
by:

did not work with my two hitch mounts. 522167



- 93347
by:

The product does not fit into the hitch at all. It is completely useless. It does not secure the hitch, reduce rattle or insert itself at all into the gap between the hitch and the attachment im attempting to stabilize. When you attempt to tighten it the entire unit pops off the hitch. Very very poor qualoty on this product. Does not at all do as advertised. 521221



- 93347
by:

Works good!! 517808



- 93347
by:

Does not fit easily between the shaft and the frame. Still raddles vertically. 510076



- 93347
by:

This is a good unit for light duty towing, or taking the slack out of a bike rack or something small. When I used it to remove the slack on my BlueOx tow bar, it broke while towing my Mini Cooper. Lasted about 6 or 7 months. 503001


Comments

An anti-rattle device like the Roadmaster Quiet Hitch # RM-061
Roadmaster Quiet Hitch for 2" Trailer Hitches
$28.51
would be much better suited for flat towing that what you previously used.

-- Mike L - 05/01/2018

37981

- 93347
by:

Great product and excellent service! 497844


Comments

Thanks for the follow up, and everything is working just fine. I did change out the bolts to stainless though due to rust. No big deal.

Jon - 04/18/2019

53103

- 93347
by:

Arrived on time and works as expected!!! 475709



- 93347
by:

I had a problem with a hitch rattle that drove me crazy until i found this item . I works great . 472738



- 93347
by:

The anti rattle device makes my Hollywood HR1400, even more secure works great. Rebecca made sure it was sent out very same day and followed up with tracking information. Thanks 470872



- 93347
by:

Broke first time I used it. 470804



- 93347
by:

I have not had a chance to try this product yet, but it looks like it will do the trick when I start trailering my boat later this year. It seems to be rugged. I definitely recommend it if you are tired of the draw bar rattling... 464534



- 93347
by:

This product does not work very well on a 1.25" hitch. Seems better suited for a 2" hitch, but that's a guess. The beveled edge of the wedge that should fill the gap is too "fat" and won't insert properly. Because of that, the whole thing does not tighten properly. It starts to pull to one side. I am trying to rig a fix, but as of now, very disappointed. 459719



- 93347
by:

It is just what i needed. I searched on line for something to stop the rattle and the price was perfect. Got it it just a few days. 454011



- 93347
by:

I tried this on a 1-1/4 hitch and it would not fit on the hitch at all. Next, I put it on a 2-inch hitch and it worked partly. It was OK for a ball hitch but failed when put on with a handicap scooter lift. It got mangled and it was impossible to straighten it out on an anvil, After heating it up and straightening it out again, I heated it to red and then oil hardened it. It worked partly for trailers, but is not adequate for hitch attachments that have a lot of twisting load. I ended up getting shims and using them. 453337



- 93347
by:

Simple design......and it works !! 452457


50
199
Show More Reviews

Ask the Experts about this Boone Outdoor Hitch Anti-Rattle

Do you have a question about this Hitch Anti-Rattle?


  • Additional Anti-Rattle Device Needed for the Swagman G10 # S64682
  • Glad to hear that you are happy with the Swagman G10 # S64682! The G10 does come with a threaded hitch pin that should be reducing the rattle/play between your bike rack and the trailer hitch receiver. If something doesn't seem right the Receiver Insert # P313 may need to be replaced due to damage. We do have some other products that do help to eliminate movement between hitch mount products and the hitch receiver. The most effective product that we have to accomplish this is the...
    view full answer...

  • Weigh Safe Ball Mount Replacement Shanks, Anti-Rattle, and Ball Movement
  • Hello and welcome back! There are numerous replacement shanks only for the Weigh Safe ball mounts such as # WS6-2. I have included a link to the various options for you. The shank for the WS6-2 is # DB6-2. Current pricing is available on its product page. Ball mounts are going to rattle, and adjustable ball mounts, being comprised of several pieces, can rattle more so. With that said the ball platform part of the Weigh Safe ball mounts is pretty secure. The 2 pins are of course...
    view full answer...

  • Best Anti-Rattle Locking Hitch Pin for a Trailer Hitch Adapter with 1-1/4 Inch Shank
  • The 1-1/4 inch shank on the MaxxTow adapter # MT70355 is solid, see picture, so you will not be able to use anti-rattle hitch lock # 63147. But I do have a solution that you might like. You could use locking hitch pin # 5200 with anti-rattle device # 93347. It may not be the prettiest set up but it will give you a lock and anti-rattle.
    view full answer...

  • Anti-Rattle Device that Can be Used when Towing a Trailer
  • The MaxxTow Anti-Rattle Clamp # MT70283 has not been tested or rated for use when towing a trailer. Because of that it should only be used for hitch mounted accessories such as bike racks or cargo carriers. So basically since they have not tested it for towing they can't rate it for towing and that is where that note on the product page came from. For an anti-rattle device that you can tow with and costs about the same as the MaxxTow I recommend # 63232. This will work with a ball mount...
    view full answer...

  • Anti-rattle Devices for Use With 1-1/4-Inch to 2-Inch Hitch Adapter on Curt Hitch # C11681
  • Thank you for your recent purchase from etrailer.com. All of the hitches offered for your 2014 Honda Accord, including the Curt # C11681 you chose, are light-duty Class I types that have a maximum bike carrying capacity of 2 bikes - even if the carrier itself can hold 3. You might care to refer to the linked article on hitch classes. A further complication in your situation is that use of a hitch adapter - any adapter or extender - will have the unavoidable side-effect of reducing the...
    view full answer...

  • Anti-Rattle Hitch Stabilizers to Reduce Play of Ball Mount in Hitch Receiver
  • The Weigh Safe 2-Ball Mount # WS4-2 has a standard 2-inch shank, in this case made of milled billet aluminum for strength. It is not sized differently due to its material. I went to our warehouse and measured the shank with a precision digital caliper and found it to be 1.943-inches. If you care to add an anti-rattle mechanism to reduce any play between the shank and receiver tube, you can use Boone # 93347 or the Roadmaster Quiet Hitch # RM-061.
    view full answer...

  • Do Draw-Tite Trailer Hitches Require a Stabilization Strap Like Curt Hitches for a 2016 Mazda CX-3
  • Curt is the only manufacturer that requires the use of stabilization strap # 18050. No other manufacturers require it though you can still use it if you want to. The idea is that the strap reduces some of the stress on the hitch. Uhaul hitches are just rebranded hitches from other hitch manufacturers so it is a Draw-Tite or a Curt too. Any accessory you put in a hitch is going to move. This is because the shank of the accessory has to be a little smaller than the receiver opening so...
    view full answer...

  • Which Trailer Hitch and Locking Anit-Rattle Device Fits a 2010 BMW 128i Coupe
  • The Curt Class I Trailer Hitch Receiver with Drawbar, # 11184, will fit your 2010 BMW 128i Coupe. As far as the rattling goes, we have not received any comments regarding rattling. However, if there is rattling, it could be a few things causing the noise. First, it may not be the hitch, but something that is loose from installing the hitch. If everything is re-assembled correctly according to the instructions (linked below) rattling is less likely. Also, it is important to torque the...
    view full answer...

  • Locking Anti-Rattle Hitch Pin for Use with a 1-1/4 Inch Hitch and 1-1/4 to 2 Inch Adapter
  • The first thing you will want to look at is the shank of the adapter. If it is hollow then you can use locking hitch pin # SHP2082 or # 63147. But if the shank is not hollow then you will need to use a regular anti-rattle device like # 93347 and lock # 5200. I must warn you that the use of an adapter reduces the tongue weight capacity of the trailer hitch by 50 percent. So if the combined weight of the bike rack and bikes is more than half the tongue weight capacity of the hitch you...
    view full answer...

  • Anti-Rattle Device for 20x47 Pro Series Cargo Carrier for 1-1/4 Inch Trailer Hitches
  • Since most 1-1/4 inch accessories like # 63155 have a solid shank you will need to use anti-rattle device # 93347. I have included a link to a video showing how it works.
    view full answer...

  • Hitch Accessory/Ball Mount Stabilizer for Trailer Hitch with No Clearance on Receiver Shank
  • I have a solution for you, but the Brophy Stabilizer Bracket # RHSB that you referenced will not work on your hitch. You are correct that the safety chain loop brackets will interfere with the stabilizer. The # RHSB requires 1 inch minimum clearance from the front of the hitch in order to mount. If your ball mount or hitch accessory that you are wanting to stabilize has a hollow shank, an Anti-Rattle Trailer Hitch Receiver Lock for 2 Hitches # 63232 will work well for you. This anti-rattle...
    view full answer...

  • Drilling a Hole in a Receiver to Accept a J-Pin Anti-Rattle Device
  • Drilling a hole in your hitch will void the manufacturers warranty. That being said you can purchase other styles of anti-rattle devices that will work very well and you will not have to modify the hitch to install them. I would recommend the SoftRide anti-rattle hitch lock, part # SR25219, this lock has a nut that installs inside the hollow draw bar or shank of the hitch accessory and then, when the hitch pin lock is threaded into the hitch, the ball mount or shank is wedged to the side...
    view full answer...

  • Recommended No-Rattle Trailer Hitch Wedge For Bike Rack On 1-1/4 And 2 Inch Hitches
  • The Brophy Stabilizer Clamp and U-Bolt, part # RSCP you referenced is designed to work with 2 inch receivers and would not have enough thread to use on a 1-1/4 inch receiver, but we may have a solution for you. If the no-wobble bolt for your bike rack protrudes outside the receiver enough as indicated by the red arrow in the attached photo, you may be able to use the Boone No-Rattle Trailer Hitch Wedge, part # 93347. You can see how the No-Rattle wedge is used in the attached video....
    view full answer...

  • Can a 1-1/4 Inch Bike Rack be Used in a 2 Inch Trailer Hitch Receiver
  • You can still use your 1-1/4 inch bike rack with a 2 inch trailer hitch receiver. The first thing I would check is to see if there is an adapter sleeve or alternate shank that is designed specifically for your bike rack in order to use it in a 2 inch hitch. This would be the most ideal way to adapt the bike rack to fit the new hitch. If a specific adapter is not available, you can use a reducer sleeve to convert the 2 inch hitch to a 1-1/4 inch for times when you want to use the bike...
    view full answer...

  • Anti-Rattle Device Recommendation for a 1-1/4 inch Hitch
  • I do have an anti-rattle device that will work on a 1-1/4 inch hitch, but the Roadmaster Quiet Hitch # RM-061 that you referenced is designed to only work on 2 inch hitches and would not work for you. Check out the No-Rattle Trailer Hitch Wedge # 93347. This product will work on your 1-1/4 inch hitch and also doubles as a theft-deterrent.
    view full answer...

  • Recommended Anti-Rattle Devices for Towing a Boat Trailer
  • There are several anti-rattle devices that would be good to use when towing a boat trailer. The construction of your ball mount will determine the best choice for your application. If your ball mount is hollow, and you have a 2 inch receiver hitch, then I would recommend the Softride Anti-Rattle Device and Lock for 2 inch Trailer Hitches, item # SR25219. This anti rattle device also includes a lock to secure the ball mount to the vehicle. If your ball mount is solid, and you have...
    view full answer...

  • Can Roadmaster Quiet Hitch for 2-Inch Trailer Hitches # RM-061 Be Used for Towing
  • The part you referenced, Roadmaster Quiet Hitch for 2-Inch Trailer Hitches # RM-061, is indeed intended for use with tow bars that are pulling a rolling vehicle. It can also be used to secure an accessory item such as a bike rack, but NOT when pulling a trailer. A better option is Boone No-Rattle Trailer Hitch Wedge # 93347. This cost-effective anti-rattle device can be used when towing and it fits both 1-1/4-inch and 2-inch size receivers. Please refer to the linked videos for more...
    view full answer...

  • How Can I Tighten the Fit Between My Trailer Hitch and Bike Rack
  • One solution for you is the No-Rattle Trailer Hitch Wedge # 93347. This wedge slides into your hitch receiver and then connects to your hitch pin. You will need to have a standard hitch pin for it to work properly. I've included a review video of the wedge you can take a look at. Also, if you tell me what bike rack you have I may have other more specific solutions for your setup that could help.
    view full answer...

  • How Much Play is there Between EZ Heavy Duty Adjustable Hitch with Combo Ball # AM3298 and Receiver
  • The EZ Heavy Duty Adjustable Hitch with Combo Ball # AM3298 is comparable to the other ball mounts that you have mentioned. Any ball mount or shank on an accessory is made with a certain amount of tolerance in the size of the shank. The differences are so small you probably would not be able to tell the difference. Shanks are made smaller than the receiver opening so that it is easy to insert and remove the accessory. The movement can be limited or in some cases eliminated using an anti...
    view full answer...

  • Anti Rattle Device Recommendation for Class I Hitch without Raised Lip Around Edge
  • According to our contacts at Draw Tite the Pro Series # 63090 Anti-Rattle device will work on hitches with and without the lip.
    view full answer...

  • Options on How to Fix a Loose 2 Inch Ball Mount
  • I have a couple different options on ways to fix a loose ball mount. The Anti-Rattle Hitch Pin, # SHP2061, dramatically reduces any movement or vibration between your hitch and hollow shank ball mount. The No-Rattle Trailer Hitch Wedge, # 93347, wedges itself between the receiver and ball mount to take up play and eliminate rattle. The Roadmaster Quiet Hitch, # RM-061, helps eliminate rattle and sway within your hitch receiver.
    view full answer...

  • Reducing Movement in Receiver When Using a Reducer Sleeve in 2-1/2 Inch Ford Factory Trailer Hitch
  • The 2-1/2 inch Reese shank # RP54977 will fit the 2-1/2 inch factory Ford hitch on your truck. But there could be a possible fit issue. The factory Ford 2-1/2 inch receiver has a unique corner radius that doesn't match up to anything well. We know that there can be issues on 2012 to 2014 models. The 2011 may be a better fit but I cannot guarantee it. Using an anti-rattle device such as # 93347 will help a lot with the movement due to the use of the reducer sleeve. I have included a link...
    view full answer...

  • How to Stop a Trailer Hitch Mount Bike Rack from Moving Too Much in the Trailer Hitch
  • Using an anti-rattle hitch and cable lock will add an element of security for the bike and racks but is not going to offer any additional support to reduce movement of the rack. I do have a couple of options for you though. First, you can find some additional support from the use of a stabilization strap such as # 18050. I have linked a video that shows how this strap works. Another option would be an additional anti-rattle device such as # RM-061 for a 2 inch hitch or # 93347 for...
    view full answer...

  • Recommendation For Anti-Rattle System That Works With Weigh Safe 2-Ball Mount - Item # LTB4-2
  • Because of the unique design and function of the Weigh Safe 180 Hitch 2-Ball Mount, Item # LTB4-2, there are not many anti-rattle systems that work well with it. A good but simple option is the No-Rattle Trailer Hitch Wedge, Item # 93347, by Boone Outdoor Hardware. Another option to consider is the Blue Ox Hitch Receiver Immobilizer II, Item # BX88224. I have attached videos for you to check out.
    view full answer...

  • Rola Trailer Hitch Mount Cargo Carrier Assembly and Anti-Rattle/Hitch Lock Recommendations
  • There are actually 4 bolts that hold each side of the carrier together and 4 bolts that attach the bottom support bracket. But, yes, there are 2 bolts that hold the carrier assembly to the shank. The bolts used are 3/8 inch diameter, 3 inch long carriage bolts so they are by no means too small for the 300 pound capacity of the carrier. The weight of the carrier does not subtract from its capacity, but does count against the tongue weight capacity of the trailer hitch on the vehicle....
    view full answer...

  • Eliminating Wobble and Movement in a Yakima Trailer Hitch Mount Bike Rack
  • You can use an anti-rattle device such as # SHP2082 as long as the shank on the bike rack is hollow. If it is not hollow then use anti-rattle device # 93347. I have included a link to a video review of device # 93347 for you. It is also possible that inside the shank of your Yakima bike rack there is a weld nut that accepts a threaded hitch pin. To determine which pin will fit I would need to know the model of the bike rack.
    view full answer...

  • Anti-rattle Device Recommendations for the Trailer Hitch Adapter # 80303
  • On the Hitch Adapter, # 80303, the end that fits into the trailer hitch requires a 1/2 inch hitch pin and the receiver side needs a 5/8 hitch pin like you have said. Provided that the bike rack shank is hollow, you may be able to use Anti-Rattle Device and Lock, # S64030. For the end of the adapter that fits into the trailer hitch, I recommend # 93347. Another issue that you may not be aware of is that the use of an adapter reduces the tongue weight capacity of a trailer hitch by...
    view full answer...

  • Anti-Rattle to Work When Towing a Trailer
  • The Brophy Stabilizer Clamp and U-Bolt # RSCP is not to be used for towing. If you're looking for something to use to tow the Boone No-Rattle Trailer Hitch Wedge # 93347 is a better option.
    view full answer...

  • Recommended Anti-Rattle Adapters For 1-1/4 Inch Trailer Hitch Carrying Bike Rack
  • To reduce the rattle and wobble on your hitch when you are using your bike rack we have a couple options you can check out. First, if your trailer hitch has a lip on the end of the receiver I recommend the Roadmaster Quiet Hitch, part # RM-061-125. I have attached a photo of this adapter installed on a trailer hitch you can take a look at. Another adapter you can use with your 1-1/4 inch trailer hitch is the No-Rattle Trailer Hitch Wedge, part # 93347. This works great if you have...
    view full answer...


Do you have a question about this Hitch Anti-Rattle?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality hitch anti-rattle for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch anti-rattle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Matthew K
Video by:
Alan C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924