Bolt Extractor - Metric - 3/8" Drive - 8-mm to 19-mm - Steel - 9 Pieces

Video Transcript for Checking Out the Bolt Extractor

Jeff: Hello, everybody, this is Jeff at etrailer.com. Today, we're going to take a look at this 9-Piece 3/8" Drive Steel Metric Bolt or Nut Extractor Set in a nice, molded storage case. Now, if you notice, I'm going to zoom in here just to show you on the inside, they have these gripping edges that'll remove any old stripped, rusted, or painted nuts and bolts, and these are a impact grade chromoly steel, which is strong and durable. You can either use a three-eighths inch drive ratchet or an impact with these. I happened to pull a ratchet just to show you, three-eighths in size, you just snap it on there, and then when you go to remove it, when you put this onto your nut or bolt, those grippers, as you go to loosen it, will grip onto the rounded or worn portion of the nut or bolt, and it start to remove it from where you got to have it so it's very easy to use.Now, the sizes that come in this, and they are listed in the storage case also, starts with a eight millimeter to a 10 millimeter, to an 11, a 12, a 13, a 14, and then a 16, a 17, and a 19 millimeter is the largest one. And, as we also mentioned, it comes in this nice, molded storage case.Now I do want to mention that due to some of the nuts or bolts that are rounded or damaged, these extractors may not fit the exact stated sizes that are shown here so what you want to do is pick the extractor size that'll fit on that nut or bolt the best.

And you just close this, slide the latch over, it holds it all into place.But that should do it for the review on the 9-Piece 3/8" Drive Steel Metric Bolt or Nut Extractor in the Storage Case.