Video Transcript for How to Set Up Your Covercraft SeatSaver Custom Seat Covers on a 2015 GMC Sierra 1500

Today in this 2015 GMC Sierra 1500, we're going to bee installing the Covercraft SeatSaver Custom Seat Covers for the front in charcoal color, part number SS3439PCCH. Keep your factory seats looking brand new with the Covercraft seat covers made from a durable heavy duty cotton which can be easily cleaned by throwing them in your washer and dryer at home. For these custom fit seat covers here actually allow for access to your seat belts and if you look on the sides here, it has double stitched seams which actually adds to its durability. This particular set comes with a center console cover here, which allow you to access your storage compartment. On the backside of both the driver and passenger side, we have this map storage section or for magazines or whatever you be taking with you on your trip. It also has this portion here that allow you side impact airbags to deploy when needed. Now we've already installed the seat cover on the passenger side. Now we'll show you how the driver side and the center console go. Now to get started on the driver side, the first step we're going to do is we're actually going to remove the head rest and then go from there. We'll set that aside. We'll put that cover for the head rest off later.

Next we'll grab our driver side and start to slide that down over the actual back of the seat. You'll know which is which because there's an actual pocket on the back side and this be actually start getting this pretty well set. On the bottom here there's some hook and loop fasteners that will attach to the back of your seat like so. Now with that done, we'll go back up to the front, feet are strapped through to the crevice in the front seat, underneath seat and push that through as well. Here's the strap I was talking about and that's going to go into the crevice here. I want to push that down until it's all fed through because you want this actual flap here to be pushed through as well. With that done, we'll now go underneath and feed it through to the front. Here's the strap that we fed through.

Make sure it's pulled down nice and tight. Push that underneath, towards the front. Okay, we got our strap pulled forward, then we'll go up underneath the front portion of the seat and we have a buckle here, open up, take the open end here and actually feed our strap through that, like so. Then we'll actually tuck the rest of this around the front seat. This is going to be a tight fit, just have a little patience. Now this is going to be pretty wrinkly when you initially install it but after by in it for a few times, it will eventually smooth out.

Now, you noticed this little pouch on the side here. This actually gets tucked in between the seat in this plastic piece just to make sure the seat cover actually stays in place. We get to where we want it and then we'll start to push it in as needed or you could also take a plastic tool to assist you making sure it goes to where it needs to go. All right, that put in place, we'll go underneath again. We'll take that one under the buckle, plug it into the other and then cinch it up as much as we can to tighten it up. I'm sure it's going to stay in place. Now we can install the seat cover for the head rest. All right, we have that in place, make it a little bit easier to put on.

Go ahead and slide it on, pull it down, bring our bottom flap here with the hook and loop straps up underneath and hook it to the other side. Now we're ready to go. Next, we'll move on to the center console. I will start with the bottom side, just place it on loosely for now, pushing center piece in the back there, this will go around the sides here and then this will fit around the front portion. Go around the back and pull it through so as well our side pieces, attach them with the hook in the straps that are sewn in, pull nice and tight, attach that side as well. Nice and tucked underneath. So our plastic tool here to help us out a little bit. All right with everything set as far as the seats are concerned, now we'll go to the top half of the center console. We'll start by going on the top portion here when it's folded up like so. Shove in the rest in between, folding it down, grabbing the other portion, start pulling that through. The other side of the strap here, the straps sides through here. They're slightly elastic and have hooks and loops as well and we'll pull the top up and around the top portion of our console with center portion. We'll then pull this around, making sure to leave that space open for the little latch here to open up your center console when you have it in this position. There you have it for the Covercraft SeatSaver Custom Seat Covers, part number SS3439PCCH on our 2015 GMC Sierra 1500.