Most Popular Stop/Turn/Tail/Backup for John Deere Gator

Awesome lights, nice and bright. Being able to add reverse lights to my boat trailer is very helpful on dark boat ramps. The Combo light that fits in my existing grommet was nice since there was no room to add an additional light.

This is the third boat trailer that I have used these lights on. While the backup lights aren't "daylight" bright they do a pretty good job. (it's my understanding that "back up lights" are regulated as to total light output) If you need more light you could always use a seperate "work light" in addition to your regular stop/turn/tail light assembly. One of the nice things about these lights is that they fit in the standard oval mounting hole as a regular oval tail light assembly. Another is that the "white" LED's turn "red" when the stop or turn function is activated. I like the fact that I can have (at least a fair amount) of light to aid in backing the trailer at night down those pesky dark boat ramps. They also come in handy to alert others that you are backing up. As a technical note: the back up light gets it's ground from inside the tail light NOT from the white (ground) wire from the back up light pigtail. I other words, if you apply power to the red wire and ground the white wire.......the backup light WILL NOT ILLUMINATE! That does not mean you have received a bad light from Etrailer. The white wire on the back up light pigtail (2 pin,....1 red and 1 white) IS NOT USED. You must use the white wire from the stop/turn/tail light pigtail (3 pin,...1 red, 1 white, and 1 black) as your ground for the back up light to work. The earlier version of this light had the grounds separated.